Double Crown Fork TSP Custom Fork raw

€179.95*

Product number: TSP002

Product information "Double Crown Fork TSP Custom Fork raw"

Double Crown TSP Custom Fork raw

NEW !!!

Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Straight Italian Design guarantees reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!

black matte
for 20 till 28 inch tires
up to 102 mm (~4 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down
with disk brake mount
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 107 mm (~4,12 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for rims up to 100 m (~3,94 inches).
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

Frame and Fork Protectors for Double Crown Forks 50mm Pair Y294

Frame and Fork Protectorsfor Double Crown Forks 50 to protect Your frame and your double crown fork from dings and dents! 50 mm (~1,97 inches), 1 pair for 32 mm (~1,26 inches) tubes

€5.95*

Adapter Diskbrake Mount for TSP Demon Fork TSP450

Adapter Diskbrake Mount for TSP Demon Fork and Double Crown ForkWith this innovative mount you can use a diskbrake with a disk up to 160 mm diameterThe mount is raw and unlaquered.

€14.95*

Frame and Fork Protectors for Double Crown Forks 30mm Pair Y295

Frame and Fork Protectorsfor Double Crown Forks 30 to protect Your frame and your double crown fork from dings and dents! 30 mm (~1,18 inches), 1 pair for 32 mm (~1,26 inches) tubes

€5.95*

Accessory Items

Demon Fork TSP Custom Fork raw TSP001

Demon Fork TSP Custom Fork Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Innovative, italian Design connects rolling easiness with reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike! Raw unlaquered for 20 till 28 inch tires up to 102 mm (~4,01 inches) rim width 1 1/8 inch shaft Length of shaft: 240 mm (~9,45 inches) - can be cutted down to 80 mm (~3,15 inches) Brake mounts for disk Length over all: 705 mm (~27,75 inches) Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount). Diameter of fork tubes: 32 mm (~1,26 inches) Width between fork tubes: 144 mm (~5,67 inches) Width at axle mount: 100 mm (~3,94 inches) The forks were developed for the 100 mm (~3,94 inches) rims. Length of shaft and fork tubes are shortable. Comes with end cover plugs for the fork tubes. Made in Italy

€179.95*

Cutsomers also bought

Headset Ahead 1 1/8 Inch Y544

Headset Ahead 1 1/8 Inch 28,6 / 34,0 / 30,0 not to be used with threaded front forks

€12.95*

Adapter Diskbrake Mount for TSP Demon Fork TSP450

Adapter Diskbrake Mount for TSP Demon Fork and Double Crown ForkWith this innovative mount you can use a diskbrake with a disk up to 160 mm diameterThe mount is raw and unlaquered.

€14.95*

Demon Fork TSP Custom Fork raw TSP001

€179.95*

Offset Chain Ring Black CP SS913C

Offset Chain Ring Classic Cycle 1 cm (~0,69 inches) Offset cool offset chain wheel for "one piece crank" For Chains of 1/2 x 1/8 Helps to bring the chain 1 cm (~0,69 inches) off the line not to touch the tire Diameter of the bolt circle is of standard 130 mm (~5,12 inches)

€24.95*

Tire Fat Bike Classic Cycle Zig Zag 26 x 4.0 97/102-559 ZZ264BKBK

Fat Bike Tire Classic Cycle Zig Zag 26 x 4.0 97/102-559 72 TPI = Lightweight and strong! max load = 155kg/pc About 87 mm (~3,42 inches) wide on a 82 mm (~3,22 inches) rim. About 105 mm (~4,13 inches) wide on a 102 mm (~4,02 inches) rim. Diameter complete: 730 mm + / - 20 mm (~28,74 +/-0,79 inches) concerning to pressure and rim diameter. This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance! The last two pictures show the Zig Zag mounted on a 132 mm (~5,2 inches) wide black rim from us. Attention: In these two pictures the labeling of the tires differs from the actual tires! Weight: 1620 g (~3,57 pounds) If you assemble the tire on extra wide rims do not to put more pressure than 16 PSI. It could blast. 1 Piece Tube recommendation: 26 x 4.0 tube

€74.95*