Tire Zig Zag Fat Hog 26 x 3.0 76-559 white wall

€42.95*

Product number: FH2630BKWH

Community Bilder

Product information "Tire Zig Zag Fat Hog 26 x 3.0 76-559 white wall"

Zig Zag Fat Hog Tire 26 x 3.0 black white wall

76-559

Zig Zag pattern

About 87 mm (~3,42 inches) wide on a 82 mm (~3,23 inches) rim.

About 103 mm (~4,05 inches) wide on a 102 mm (~4,01 inches) rim.

This tire fits on all 26" Classic Cycle rims from ~ 30 to 102 mm (~1,18 to 4,01 inches) width!

But please check frame/fork for clearance!

The pictures shows the new Fat Hog Tire assembled on a 82 mm (~3,23 inches) wide rim.

Diameter complete: 730 mm + / - 20 mm (~28,74 +/-0,79 inches) concerning to pressure and rim diameter.

Weight: 1650 g (~3,63 pounds)

If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.

1 Piece

Tube recommendation: 26 x 3.0 tube

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches)  Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*