Tannus Armour puncture protection, 20 x 3.5 - 4.0

€49.95*

Product number: 519134

Product information "Tannus Armour puncture protection, 20 x 3.5 - 4.0"

The Tannus Armour is an effective 3-in-1 puncture protection system!

By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.

Puncture Protection for:

Tire - 75-100 x 406 / 20" x 3.5 - 4.0

*Tube - 60 - 115 x 406 / 20 x 2.4 - 3.0

Rim - 50 - 102 x 406

The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 350 g
scope of delivery: 1 piece

*Attention: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 2.5 - 3.0 is recommended.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

Tannus Armour puncture protection, 20 x 4.0 - 4.8 519135

The Tannus Armour is an effective 3-in-1 puncture protection system! By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims. Puncture Protection for: Tire - 100 -120 x 406 / 20" x 4.0 - 4.8 *Tube - 90 - 120 x 406 / 20 x 3.0- 4.0 Rim - 65 - 140 x 406 The all-round protection against punctures, cuts and pinching. up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area free tire and tread selection very light and reusable support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction reduces the risk of snake bites (e.g. by a strong impact) patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping With flattened tube you can continue riding at reduced speed for a short period on flat paths. easy mounting anti-pinch protection for tube mounting universal sizes for several widths If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors. recyclable weight: 360 g scope of delivery: 1 piece *Please note: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 3.0 - 3.75 is recommended. From our list the Kenda Kraze 20 x 4.0 won't fit. It is not bollooning enaugh.

€52.95*

Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235

Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches) Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs) Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*

Tire Liner for tires 20-29 inch , width 100 mm / ~3,94 inch CLSBND100x13x235

Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 100 mm (~3,94 inches) Thick: 1,3 mm (~0,051 inches) Length: 2350 mm (~ 92,52 inches) ~ 400 g (~ 0,88 lbs) Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€18.95*

Cutsomers also bought

Tube 20 x 3.0 AV Y941

Tube 20 x 3.0 AV 20 x 3.0 AV for wide tires with car / auto valve

€9.95* €12.95* (23.17% saved)

Tip

204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 124 mm Black matte with Stays extra wide 1520

204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width Mudguards with four stainless steel struts and mounting hardware for Fat Bikes 20 x 4.0 - 4.8 or similar. Due to the variably adjustable struts, the mounting points on the frame can be flexibly selected. The fenders are therefore also suitable for many common 20-inch Fat E-bikes. 124 mm (~4,88 inches) wide, 20 inch., black matte complete plastic fender set for Fat Bikes or similar bike types Width: 124 mm (~4,88 inches) Hight: 35 mm (~1,38 inches) Diameter inside: ~ 550 mm (~21,65 inches) Diameter outside: ~ 610 mm (~24 inches) Rear length in circumference: ~ 960 mm (~37,8 inches) Front length in circumference: ~ 620 mm (~24,4 inches) Polycarbunate plastic black matte Weight: ~ 1080 g. (~2,65 pounds)

€69.95*

Tube 20 x 4.0 - 4 1/4 inch. AV Y957

Tube 20 x 4.0 - 4 1/4 inch. with car/auto valve 40 mm

€13.95*

HIGO / Julet adapter cable 19,5 cm for ebike, 2 PIN red to 3 PIN yellow HIG-ADA-2T3-BRA

Extension cable for Ebike Technical data: Connector: HIGO / Julet yellow 3PIN male, red 2 PIN female Water resistance: IP65 Cable length: 19,5 cm / 7,67 inches Plug connection: yellow male, red female Outer material: ABS plastic brake sensor adapter General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€7.95*

204 E-Huntsman Tire 20 x 4.0 inch pure black VRHM204BK

"E-Huntsman 20 x 4.0 inch tyre" 20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork! Dimensions / Details: ETRTO: 102 x 406 Max: 36 PSI / 2,5 Bar / 250 kPa Over Ride E-Bike ready 50 Material: EndC - Endurance Compound Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge. Total diameter: 60 cm / 23,62 inches Offered is a tyre without rim. Weight: ~ 2250 g / ~ 4,96 lbs.

€69.95*

Fat Bike Plastic Fender Set 26 x 4.0 - 4.8 124 mm Black with Stays extra wide 1511

Fat Bike Plastic Fender Set 26 x4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width 124 mm (~4,88 inches) wide, 26 inch., black Can also be fitted on 24 x 4 1/4 Tires complete plastic fender set for Fat Bikes or similar bike types Width: 124 mm (~4,88 inches) Hight: 35 mm (~1,38 inches) Diameter inside: ~ 770 mm (~30,31 inches) Diameter outside: ~ 810 mm (~31,89 inches) Rear length in circumference: ~1190 mm (~46,85 inches) Front length in circumference: ~ 700 mm (~27,56 inches) Polycarbunate plastic black glossy Weight: ~ 1200 g. (~2,65 pounds)

€74.95*