Front geared hub motor 250W for ebike

€69.95*

% €249.95* (72.01% saved)
Product number: XF1403FB0473
Product information "Front geared hub motor 250W for ebike"

XOFO Front geared hub motor 250W for ebike

General:

The front motor is mounted in the bicycle fork in the front wheel. Since the motor is at the front and the battery is usually at the rear, the bike has a good weight distribution. This allows the bike to be ridden easily and to be optimally balanced. The switched-on motor pulls the bike forward as soon as you start pedalling. This makes it possible to get going quickly.

 
Technical details:
  • Type: Geared Motor with freewheel
  • Voltage: 36V
  • Rated Power: 250W
  • Max Speed:  25 km/h
  • Torque max: 30 N.m
  • Maximum Efficiency: ≥ 81
  • Wheel Size: 24 - 29" 
  • Diameter Motor: ~ 120 mm / 4,72 inches
  • Installation width: 100 mm / 3,94 inches
  • Weight: ~ 2,7 kg / ~ 5,95 lbs
  • Motor connection: 9-Pin
  • Working Temperature: -20°C - 45°C
  • Spokes: 12G + 13G
  • Spoke holes: 36 holes
  • Brakes:  Rimbrake and Discbrake
  • Cable position:  right
  • Mounting:Quick release
  • Color: Silver

Hint: The Motor is marked with 26" wheel size. Fits to 24" to 29" wheels as well.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Fat Bike Cartridge B.B. Set for 120mm housing BOT-BRA-UNI-120
Fat Bike Cartridge B.B. Set for 120mm housing black for 120 mm bottom bracket housing total length (L1): 180 mm (~7,08 inches) L2: 32 mm  (~1,26 inch) ~ 400 gr. BSA, JIS sealed bearings compatible with Shimano tools

€15.95*
UDX BMX Zoom Stem A-Head 1 1/8 Inch, black, 4 screws UD1232
UDX BMX Zoom Stem A-Head 1 1/8 Inch, black matte, 4 screws aluminium body detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches) Nosing: 50 mm (~1,97 inches) for 1 1/8 inch. a-head shafts / headsets  28,6 mm MX-C631-8, ISO-M Original UDX BMX part from Urban Drivestyle Berlin

€23.95*
Short side stand, black PM-1001408
Short side stand, black Stable side stand Direct mounting on frame with KSA 40 mount Hole spacing 40 mm / 1,57 inches, with threaded through hole Optimum stand due to wide base. Suitable for e.g. low-lying bicycle frames, e-scooters, scooters.... Material: aluminium Weight: approx. 200 g / 0,44 lbs Colour: black Length from centre of mounting points to floor: ~ 200 mm / 7,87 inches Mounting side: left Original side stand of the UNI Boost e-scooter from Urban Drivestyle Berlin!

€16.95*
%
204 Front Wheel 20 x 4 inch Fat Bike 80 mm black for Disk silver Hub, 2nd choice UD6589
204 Front Wheel 20 x 4 inch Fat Bike 80 mm black with silver hub and disk mount, 2nd choice 20 x 4 inch Fat Bike front wheel black matte anodized alu rim, 36 Spokes 2,6  mm strudy, strong and sexy alumnium silver Hub with disc brake mount 44 mm 6 holes over locknut dimension: 135 mm axle 9,5 mm diameter with bolt on rim width: 80 mm weight: ~ 1550 g Hint: According to the picture, the spoke holes in the rim base are a little unsightly - unheard of with obligatory use of a rim tape! Surface shows oily traces due to production.

€129.95* €149.95* (13.34% saved)
%
Con-Tec Stop brake outer cable black 40 m 5 mm SP2 UD307916
  Con-Tec Stop brake outer cable black 40 m 5 mm SP2

€49.95* €59.95* (16.68% saved)