PAS KT-V12L Pedal Assist Sensor

Classic Cycle

€14.95*

Prices incl. VAT plus shipping costs

Product number: KT-V12L

Product information "PAS KT-V12L Pedal Assist Sensor "

PAS KT-V12L Pedal Assist Sensor

Installation side: left
Cable length: 130 mm
Connector: 3-pin Julet connector, waterproof
Fits e.g. e-bikes from Urban Drivestyle!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Fat Bike Cartridge B.B. Set for 120mm housing BOT-BRA-UNI-120

Fat Bike Cartridge B.B. Set for 120mm housing black for 120 mm bottom bracket housing total length (L1): 180 mm (~7,08 inches) L2: 32 mm (~1,26 inch) ~ 400 gr. BSA, JIS sealed bearings compatible with Shimano tools

€15.95*

UD black crankset LASCO 152 mm, square, 52 teeth UD1952

UD black crankset LASCO 152 mm, square, 52 teeth black steel chainring with 52 teethblack aluminum crankspedal arm length 152 mm for pedals with 9/16 threadblack aluminium chain guardThe crankset is suitable for a square axle!With 2 pieces of axle - end bolts

€39.95*

Motor extension cable Julet 9 PIN, 30 cm / 11,8 inches HIG-MOT-EXT-030

Extension cable for ebike motors Technical data: Transmission of data and power between motor and cotroller Compatible with Bafang hub motors Waterproof Julet plug 9 PIN Cable length: 21.5 cm ( 8,46 inches), 30 cm (11,8 inches) incl. plug General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€16.95*

Wiring harness 1T5, waterproof, 56 cm / 22,05 inches CAB-TRE-1T5-056

Wiring harness 1T4 Technical data: Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display Waterproof plugs / connectors Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches Connections: 3x female 3-PIN Jullet connector yellow 1x female 5-PIN Jullet connector green 1x male 2-PIN Jullet connector red 1x male 9-PIN Jullet connector black General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

Bafang LCD Display DP C15.U 1.1 BAF-LCD-C15

Bafang LCD Display DP C15.U 1.1 Technical specifications Type of display: LCD Display: Matrix Display Rated Voltage(DCV): 36/43/48 Support Modes: 0-5 Operating Temperature: -20 - 45℃ Weight: ~ 45g Installation parameter Bus system: UART Dimensions 65 x 46 x 44 mm Handlebar diameter: Ø 22.2 mm Cable Length: ~ 470 mm Connector Type: Jullet 5 PIN, female, green Display indications Current speed (km/h) Maximum speed (km/h) Average speed (km/h) Duration of single trip Distance of single trip Total Distance Reset single trip Duration Reset single trip Distance Capacity Error code display Walk Boost Backlight Tests & Certification IP code: IP X5 certifications: CE / EN 15194 / REACH / ROHS Dimensions: Dimension A 65 mmDimension B 46 mmDimension C 44 mmDimension D Ø 22.2 mmDimension E 28 mmDimension F 16 mmDimension G 1.2''

€54.95*

Fat Bike Cartridge B.B. Set for 100mm lugs BOT-BRA-UNI

Fat Bike Cartridge B.B. Set for 100mm lugs black for 100 mm bottom bracket lugs housing: 90 mm ( ~ 3,54 inches) total axle length (L1): 180 mm (~7,08 inches) length between L2: 44 mm (~1,73 inch) ~ 395 gr. BSA, ISO sealed bearings compatible with Shimano tools

€17.95*