204 MXUS Motor 500W Rear wheel 20 x 4 - 80 mm wide
Product information "204 MXUS Motor 500W Rear wheel 20 x 4 - 80 mm wide"
204 MXUS Motor 500W Rear wheel 20 x 4 - 80 mm wide
- 20 inch rear wheel
- matt black coated aluminium rim ~ 80 mm / 3,15 inches wide
- 36 spokes 2,6 mm / 0,1 inches
- disc brake mount ~44 mm / 1,73 inches 6 hole
- Hub installation dimension approx.: ~ 190 mm / 7,5 inches
- aluminium hub with industrial bearings
- 500W
- 48V
- Fixed axle: ~ 12 mm / 0,47 inches diameter
- Axle length: ~ 265 mm
- Mounting for cassette
- Rim width: ~ 80 mm / 3,15 inches
- With rim tape
- Weight: ~ 4800 g / 10,58 lbs
Specification Motor:
| Model number | GDR-15FAT-1 | ||
| Position | Rear | ||
| Construction | Gear | ||
| Rated voltage(V) | 48 | ||
| Rated Power(W) | 500 | ||
| Weight(kg) | 4.15 | ||
| Reduction Ratio | 1:5 | ||
| Wheel Diameter(inch) | 20 | ||
| Rated speed(km/h) | 25-40 | ||
| Magnet Poles(2P) | 10 | ||
| Dropout(mm) | 190 | ||
| Brake Type | Disk brake | ||
| Operating Temperature © | -20 - +45 | ||
| Efficiency(%) | ≧78% | ||
| Color | Black | ||
| Cabling Route | Shaft center right | ||
| Noise Grade(dB) | ≤55 | ||
| IP Grade | IP54 | ||
| Salt Spary Test Standard(h) | 24/96 | ||
Login
Cutsomers also bought
204 E-Huntsman Tire 20 x 4.0 inch pure black
VRHM204BK
€69.95*
"E-Huntsman 20 x 4.0 inch tyre"
20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork!
Dimensions / Details:
ETRTO: 102 x 406
Max: 36 PSI / 2,5 Bar / 250 kPa
Over Ride E-Bike ready 50
Material: EndC - Endurance Compound
Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge.
Total diameter: 60 cm / 23,62 inches
Offered is a tyre without rim.
Weight: ~ 2250 g / ~ 4,96 lbs.
MXUS KT LCD Display KT-LCD4
KT-LCD-KT-LCD4
€34.95*
MXUS KT LCD Display KT-LCD4
Technical specifications
Type of display: LCD
Display: Matrix Display
Rated Voltage(DCV): 36/43/48
Support Modes: 0-5
Operating Temperature: -20 - 45℃
Weight: ~ 45g
Installation parameter
Bus system: UART
Dimensions 54 x 19 mm
Handlebar diameter: Ø 22.2 mm
Cable Length: ~ 370 mm
Connector Type: Jullet 5 PIN, Male, green
Display indications
Current speed (km/h)
Maximum speed (km/h)
Average speed (km/h)
Duration of single trip
Distance of single trip
Total Distance
Reset single trip Duration
Reset single trip Distance
Capacity
Error code display
Walk Boost
Backlight
Tests & Certification
IP code: IP X5
certifications: CE / EN 15194 / REACH / ROHS
%
UD Seat latch plastic clip
SEA-LOC-PLA
€12.95*
€19.95*
(35.09% saved)
Seat latch plastic clip
This elongated plastic part holds the seat of your UNI MK closed.
It is attached to a frame strut with one/two M4 bolts (depending on the year of manufacture of the bike) so that the seat can lock into place. It is compatible with all UNI MK versions from V1 onwards and all mounting parts are included.
Material: Moulded plastic
Colour: Black
Dimensions: 10cm x 1cm x 2cm (L x W x H)
Includes: Plastic seat fastener, mounting parts (3x M4 bolts, nut).
Original spare part from Urban Drivestyle Berlin!
%
Foot Pegs black M10 thread for 20x4 E-bikes front / rear
FOO-M10-BLA
€29.95*
€49.90*
(39.98% saved)
Footrest black M10 thread for 20x4 E-bikes front / rearBlack
Do you love to race through the neighborhood and want to share this incredible riding experience with others? Then get some footrests now and take your friends on a bike tour! The footrests are also great for riding with kids who sit in front of the rider! In addition, they protect the shift arm and frame, should the bike fall over.
Handmade, solid and simple - The footrests with aluminum alloy are made for's riding with passengers and children and can be mounted quickly and easily, both front and rear. Due to the standardized M10 thread, they also fit other e-bikes and bikes.
Note: The footrests can be quickly and easily swapped between front and rear mount, if you increasingly ride with children and other passengers!
Features of the footrestsMaterial: alloyed aluminumThread: M10Colors: blackDimensions: L 9.8cm (7.8cm without threaded rod) x D 2cmWeight: 170g
Grub screw: Stainless steel 2A unhardened, can be tightened firmlyHandmadeServe as fall over protection for shifting unit and frameAlso fit other e-bikes and bikes with M10 thread1 pair
Put your feet up!
UD BAFANG Controller motor 48V
UD-BA-48V
€69.95*
BAFANG Urban Drive Style Controller 48V
Rated voltage: 48V
off Voltage: 41,5 +/- 1V:
Electric current: 18A +/- 1 A
Original Item from Urban Drivestyle Berlin!
The controller was installed on the UNI Boost with a setting of 20x4 and a maximum speed of 20 km/h.