Offset Chain Ring Classic Cycle
2,5 mm (~0,1 inch) Offset
cool offset chain wheel for "one piece crank", 39 teeth
For Chains of 1/2 x 1/8
Helps to bring the chain 2,5 mm (~0,1 inches) off the line not to touch the tire
Diameter of the bolt circle is of standard 103 mm (~4,05 inches)
Offset Chain Ring Classic Cycle
2,5 mm (~0,1 inch) Offset
cool offset chain wheel for "one piece crank", 42 teeth
For Chains of 1/2 x 1/8
Helps to bring the chain 2,5 mm (~0,1 inches) off the line not to touch the tire
Diameter of the bolt circle is of standard 103 mm (~4,05 inches)
Original GANT 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted cotton
Inner hand: finest soft glove leather with light padding
Size: 12
Color: creme / beige leather with white cotton with black, red and yellow stripes
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
NOS New Old Stock ~ 1970s - 1980s
Vintage Ciclolinea front fender for racing bikes 28" black
28"
NOS new old stock from the 1980s
Made in Italy
Scope of delivery: 1 front fender
material: plastic
Height: approx. 15 mm ( ~ 0.59 inch)
Width: approx. 35 mm ( ~ 1.38 inch)
Length at circumference of fender: approx. 385 mm ( ~ 15.16 inch)
Dimensions of the fork mounts: 21 mm x 25 mm ( 0.83 x 0.98 inch)
Distance centre-to-centre of the fork mounts: approx. 60 mm ( ~ 2.36 inch)
Contrary to the assembly instructions, there are no Velcro fasteners.
Weight: ~ 35 g
Indicator Chain Fichtel & Sachs
Latest version with thick, grooved connection for plastic adjusting sleeves
Specifications of the pin:
Length:~ 80 mm
Diameter: ~ 2,5 mm
Original Part Number: 10 0187 102 000
Aluminium Rim 24 inch., 56 mm (~2.20 inches) wide
ETRTO: 507
single wall
rim aluminium 24 inch
Wide:
56 mm (~2,20 inches)
inner size:
50 mm (~1,97 inches)
Holes:
36
colour:
high polished
Rim diameter ERD for calculating the spoke length:
490 mm (~19,29 inches)
Weight:
800 g (~1,76 pounds)
Donut Leather Grips, blackIn traditional leather manufacturer the grips are made of genuine leather, the same long wearing leather used for the saddle tops. Each grip is made with a stack of 25 leather washers with alu endings.1 Pair
Aluminium Alloy Rim 20 inch., 82 mm (~3,23 inches) wide
ETRTO: 406
double wall 82
Wide:
82 mm (~3,23 inches)
inner size:
75 mm (~2,95 inches)
Holes:
36
colour:
raw
Rim diameter for calculating the spoke length:
383 mm (~15,08 inches)
Weight:
1000 g (~2,20 pounds)
Tire Street Hog 20 x 3.0 cream
76-406
Semi Slick
Thick and strong tyre for up to 40 PSI / 2,75 Bar pressure.
This tyre fits all CLASSIC CYCLE 20" rims up to approx. 82 mm / 3.2 inches width!
Mounted on a 67 mm / 2.6 inches wide rim, the tyre has approximately the following dimensions:
It protrudes ~ 65 mm / 2.5 inches over the rim edge, is ~ 79 mm / 3.1 inches wide and has an overall diameter of ~ 550 mm / 21,65 inches.
1 piece
Tire Dragster Slick 20 x 3.0 pure black
Originally used on the extra cool late 60s Schwinn Sting-Ray, Krates or Muscle Bikes. Nostalgia tire for the ultimate old school look!
72-406
Dragster Sting Ray Slick
Big and strong tire for up to 35 PSI pressure.
This tire fits on all 20" Classic Cycle rims up to 67 mm (~2,6 inches) width!
Mounted on a 67 mm / 2,6 inches wide rim, the tyre has approximately the following dimensions:
It protrudes ~ 60mm / ~ 2,3 inches above the rim edge, is ~ 76 mm / ~ 3 incheswide and has an overall diameter of ~ 545 mm / ~ 21,5 inches.
Scope of delivery: 1 tire
Pedals made of plastic with reflectors
Details:
Thread: 9/16 inch
Design: Platform pedal
Material: Sturdy pedal body made of durable nylon
Axle: Boron steel
Colour: black
Weight: ~ 415 g
Platform dimensions: 97 x 95 x 27 mm
With StVZO approved reflectors
1 pair of pedals
Original accessories for Bikes from Urban Drivestyle Berlin!
Spring Beast Black
Unique Suspension Fork!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 240 mm / 9,45 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 800 mm / 31,5 inches
Distance axle mount - lower edge lower bridge: ~ 400 mm / 15,75 inches
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 110 mm / 4,33 inches
adjustable spring
Color: black, powder coated
Weight: approx. 6.35 kg / 14 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Hebie 664 self-folding side stand for bicycles / parking stand
The Hebie 664 self-folding side stand in black for bicycles and S-Pedelecs - specially modified for the UNI Bikes from Urban Drivestyle Berlin, but of course also universally usable for other 20 inch bicycles - quality made in Germany.
The stand is super sturdy and provides a stable parking position for your UNI MK, UNI Swing or UNI Bobber e-bike. The standardized threaded hole spacing is 40mm KSA.
The Hebie 664 is the self-folding version of the Hebie 661. The stand folds automatically when the bike is unloaded and brought into riding position.
Note: Do not lean / sit on the bike when it is parked on the stand, as it is designed to hold the bike's own weight, but not the additional weight of a person sitting on the bike!
Features of the side stand
Brand: Hebie
Material: Coated steel
Color: Black
Mounting:
Direct mounting on the frame by KSA 40 (special mount on the chain stay).
Hole spacing 40 mm, with threaded through hole
Dimensions: ~ 27cm x 9cm x 4cm (L x W x H)
Weight: ~ 300g
Includes: Side stand & attachments
Universal bike stand, suitable for 20 inch bikes
Self-folding through unloading
Stepless length adjustment without tools
Load capacity: 25 kg
Made in Germany
Original accessories from Urban Dirvestyle Berlin!
Spacer Box / Spacer Ring Set Alu for 1 1/8" , 24 pieces
Spacers for A-Head forks
24 spacers
4 x 2 mm
6 x 5 mm
6 x 10 mm
4 x 15 mm
4 x 20 mm
Inner diameter: ~ 28.8 mm /1 1/8"
Outer diameter: ~ 35.8 mm
Colour: black
Material: aluminium
Original accessories from Urban Drivestyle Berlin!
Busch und Müller reflector / reflex reflector K288 E1 021459
colour: red
with holder
Reflector dimensions
Width x length: approx. 55 x 50 mm
Height / thickness : approx. 14.5 mm
Weight: approx. 10 g
ECE approval / E-marking
Scope of delivery: 1 piece
Original accessories from Urban Dirvestyle Berlin
Foldable / collapsible pedals with 9/16 inch thread and reflectors.
For space-saving storage or transport!
Details:
Thread: 9/16 inch
Design: Platform pedal
Material: Stable pedal body made of durable thermoplastic
Axle: Boron steel
Colour: black
Weight: ~ 290 g
Platform dimensions: 90 x 75 x 25 mm
With StVZO approved reflectors
1 pair of pedals
Original accessories for bikes from Urban Drivestyle Berlin!
Shimano Deore HB-M510 VIA M
Front hub 32-hole aluminum, silver
Axle length: 108 mm / 4,25 inches, M9
Installation width: 100 mm / 3,94 inches
Flange width: 71.6 mm / 2,82 inches
Bolt circle diameter PCD: 42 mm / 1,65 inches
Number of holes: 32 holes
Weight: 170 g / 0,375 lbs
Silver aluminum hub
with quick release 133 mm / 5,24 inches (5-1/4")
for rim brake
Brake pads for disc brakes, blue
Carrier plate: steel, blue
Dimensions of carrier plate: L: 30 mm, H: 20 mm, total height incl. pin holder: 35 mm
Scope of delivery: 2x brake pads, as illustrated
Saddle RVS Selle Royal NOS from the 80s
New Old Stock
Quality Made in Italy
black PU on plastic base
with clamp
length: 26 cm (~10,24 inches)
width: 16 cm (~6,3 inches)
weight: 450 gr. (~0,99 pounds)
Produced: 2/1987
T-Shirt "PG", green
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
NEW!!
TSP Custom Frame Wave HC 170mm + Demon Fork HC
More than 100 years tradtion in frame building meets modern custom design in perfection.
TSP made it: they designed the perfect wave to cruise. The TSP Wave HC frame is a custom-made bike frame crafted in TSP workshops in Italy and is the ultimate and the most extreme design of bike frames. The Hard Core is near to those of our Wave line but lower and more aggressive! Even though overall extreme, it is easy to drive and suitable for long cruises.
It can be used in thousands of different configurations, giving vent to all your creativity: it can fit virtually any component on the market such as forks (cruiser, double crown, springer), rims (24″, 26″ up to 150 mm (~5,9 inches)), tires (24″ up to 4.5, 26″ up to 4.5″), handlebar (every model on the market), hubs (coaster brake, automatic gearboxes, integrated gearboxes, disc brakes).
Another unique feature of this chassis is the very low weight: about 25% less than other chassis of the same category!
It is one-size and suitable for people between 1,60 and 1,90 m (~5,25 - 6,23 ft).
All tsp frames / forks are not constructed for motorized vehicles, no matter if its a combustion or electric engine. If the frame is used with any kind of engine it's warranty will expire immediately.
A special highlight: Wheels 24 inch, 26 inch with 150 mm (~5,9 inches) rims
Colour: uncoloured / raw
possible rim sizes: 24" 26" up to 150 mm (~5,9 inches) width
bottom bracket size: BMX (US) 100 mm (~3,94 inches) with Conversion Kit OPC to BSA
head tube: 1 1/8"
needed seat post: 27,2 mm (~1,07 inches)
disc brake mounting possible: no!
coaster brake mounting possible: yes!
bike rider height: from 1,60 m to 1,95 m (~5,25 - 6,4 ft)
frame steel: tig welding cr-mo
head tube length: 140 mm (~5,51 inches)
width between chain stays: 170 mm (~6,69 inches)
dimensions:
seat -> head tube: ~746 mm (~29,37 inches)
seat -> bottom bracket: ~610 mm (~24 inches)
Length over all: 1160 mm (~45,67 inches)
weight: about 5,7 kg (~12,57 pounds)
Demon Fork HCDemon Fork TSP HC Custom ForkExceptional Custom Fork for all rims up to 100mm width. Innovative, italian Design connects rolling easiness with reliable stability.TSP sets new standards and shows again manual perfection.Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 24 oder 26 inch tires
up to 100 mm (~3,94 inches) rim width,
1 1/8 inch shaft,
Length of shaft: 240 mm (~9,45 inches)
Brake: you can install left 160 mm (~6,3 inches) disc brakes with the special support included in the package.
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Greaser Tank cover set orange
Set for right and left side
Dyed plastic
Total length: ~ 71,5 cm (~28,15 inches)
Maximum height: ~ 16,5 cm (~6,50 inches)
Book Catechism of cyclingOld knowledge 1897Dr. Karl Biesendahl devotes himself to the technical details of the bicycles at that time and describes the social development around the phenomenon of cycling. At that time completely new:
The cycling of the ladies
The clothes of the cyclist
The toilet of the cyclist
Many "style blossoms" used in the book provide an insight into a bygone era.
266 pages
Author: Dr. Karl BiesendahlISBN 978-3-935517-89-8
Fork for Electra Townie, 20 inches, ivory20 inchSteel, ivory lacquered with Decor1 inch shaft, shaft length: 185 mm (~7,28 inches)
Thread length: 40 mm (~1,57 inches)With Pivot Brake AdaptersWidth between the fork blades = axle mounting: 105 mm (~4,13 inches)Weight: approx. 1,028 kg (~2,27 pounds)The fork may have slight storage marks.
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
Powder coated
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
144
colour:
black
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
Chainwheel Poker raw, 44 teeth
Cool chainwheel for "one piece crank", 44
For chains 1/2 x 1/8
Raw steel
44 teeth (the chainwheel would have 44 teeth if it were continuously toothed)
Original GANT 1970s vintage gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 10
Color: white / red
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer
NOS New Old Stock ~ 1970s - 1980s
this size comes without "Fink" printing
Original GANT 1970s vintage gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 9
Color: white / red
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer
NOS New Old Stock ~ 1970s - 1980s
this size comes without "Fink" printing
Blade Fork ALCB double crown, double down raw 1 1/8 steerer
Length between lower end of steerer and acle mount: ~ 445 mm
Width in between the fork legs: ~ 115 mm
length of steerer: 250 mm
quadrangle tubes: 30x30 mm
Axle mount: 105 mm
For frame heads smaller than 145 mm
Lower end of steerer has 3 M6 holes
Unyielding Single Drop fork is held by 2 plates (10mm thick)Steerer tube: 1.1⁄8 ‘, ahead,Wheels: 24-29’ , wheels up to 100 mm wide
25x25 mm quadrangle tube
Weight: ~ 4,2 kg
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Roll
Width: 80 mm (~3,15 inches)
Thick: 1,1 mm (~0,043 inches)
Length: 50 m ( ~ 164 ft)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
Carrier alu red fits 27/28 inch tires
NOS New Old Stock ~ late 1990s
Made in Taiwan
Usage
City, Crossrad, Streetracer
Alu Die-Cast
Package comes with
one carrier
including adjustable bracket for mounting on the seat post clamping screw
including strut bracket with rubber cover and stainless screws
including reflector bracket
Material
Color: red
Attachments on eyelets, seat stay or chain stay
Stainless screw connectors
Technical specification:
Number of struts: 6
Strut attachment to the braze-on base of the frame dropout or seat stay or chain stay
Strut length 340 mm
Weight rack: light ~ 480 g
Dimensions of the rack: ~ 315 x 130 mm
Seat Post Clamp 34.9 mm (~1,37 inches) Alu silver
Colour: silver
Material: aluminium
Inner diameter: 34.9 mm (~1,37 inches)
Details: with Allen screws
Mounting position: mounting on the seat tube
SKS Mountain Range Fender set blue 28 inch
28"
NOS New Old Stock from the 1980s
Made in W. Germany
Stays and fixing material included - stainless steel and brass
Scope of delivery: 1 front fender; 1 rear fender comes with rear dynamo light according to german street law
Bracket for seat stay moveable
Including electrical connection socket and electrical connection in the fender for the rear light
An indentation for the chain is standard on the rear fender
Material: Plastic
Height: approx. 19 mm ( ~ 0.75 inch)
Width: approx. 60 mm ( ~ 2.36 inch)
Length of rear fender circumference: approx. 1075 mm ( ~ 42.32 inch)
Diameter inside rear fender: approx. 660 mm ( ~ 25.98 inch)
Outer diameter of rear fender: approx. 700 mm ( ~ 27.56 inch)
Length around front fender: approx. 640 mm ( ~ 25.2 inch)
Diameter inside front fender: approx. 510 mm ( ~ 20.08 inch)
Diameter outside front fender: approx. 565 mm ( ~ 22.24 inch)
Vintage Ciclolinea rear fender for racing bikes 28" blue
28"
Adjustable length
NOS new old stock from the 1980s
Made in Italy
Scope of delivery: 1 rear fender
Material: plastic
Height: approx. 15 mm ( ~ 0.59 inch)
Width: approx. 35 mm ( ~ 1.38 inch)
Length at circumference of mudguard: 465 mm - 510 mm ( 18.31 - 20.08 inch)
Dimensions of fork mounts: 12 mm x 20 mm ( 0.47 x 0.79 inch)
Distance centre-to-centre of fork mounts: approx. 70 mm ( 2.76 inch)
Weight: ~ 50 g
Spring Beast Raw
Unique Suspension Fork!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 240 mm / 9,45 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 800 mm / 31,5 inches
Distance axle mount - lower edge lower bridge: ~ 400 mm / 15,75 inches
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 110 mm / 4,33 inches
adjustable spring
Color: without, raw
Weight: approx. 6.35 kg / 14 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Extension cable for Ebike
Technical data:
Connector: 3-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 5,5 cm / 2,16 inches
Plug connection: yellow
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Original UDX hardtail frame, black matte
Build your own e-bike!
Made in Europe!
Details:
Paintwork: black matte powder-coated - slight traces due to production or storing may occur
Steel
Hardtail
Possible rim and tyre sizes: 20" rims up to 102 mm / ~4 inches width, maximum tyre size 20 x 4.0
Bottom bracket: BSA 100 mm / 3,94 inches
Head tube diameter: 44 mm / 1,73 inches (measured inside)
Seatpost mount for 32 / 1,26 inches mm seatposts
Disc brake mount: yes
Coaster brake mount: no
derailleur: yes
Side stand plate: yes
Various mounting points on the rear triangle
Head tube length: 150 mm / 5,90 inches
Rear triangle width: 195 mm / 7,67 inches
Dimensions:
seat post mount -> head tube: ~ 565 mm / 22,24 inches
seat post mount -> bottom bracket: ~ 470 mm / 18,5 inches
seat tube: ~ 440 mm / 17,32 inches
Weight: ~ 5.8 kg / 12,78 lbs
various mounting points for e.g. batteries, controller....
Original frame from the UDX bike series by Urban Drivestyle Berlin!
Urban Drive Style Controller 48V
Rated voltage: 48V
off Voltage: 41 +/- 1V:
Electric current: 18A +/- 1 A
Brakes Level: Low
Ordinary Booster
Nine Speed 20"
Original Item from Urban Drivestyle Berlin
Brake sensor magnetic for mounting on the handlebar, universal use.
Function: The brake sensor detects the movement of the magnet when the brake is applied and ensures that the motor action is interrupted.
Connection: The brake sensor has a waterproof higo / julett connection, yellow 3 -pin male
Cable length: ~ 280 mm
Mounting side: left
Scope of delivery: as shown
Original accessories from Urban Drivestyle Berlin!
Brake sensor magnetic for mounting on the handlebar, universal use.
Function: The brake sensor detects the movement of the magnet when the brake is applied and ensures that the motor action is interrupted.
Connection: The brake sensor has a waterproof higo / julett connection, yellow 3 -pin male
Cable length: ~ 280 mm
Mounting side: right
Scope of delivery: as shown
Original accessories from Urban Drivestyle Berlin!
UD Micro Shift Trigger TS-38 7-speed shifter right
Thumb Tap ShifterPush operationOptical gear indicatorFor flat handlebar
Specifications:Cassette Compatibility: 7 Operations: Push PushBracket material: engineering compositeShifter material: resin steelShift cable adjuster: yesClamping: 22.2 mmShift cable: NormalWeight: ~ 140 g
Lever with 7 gears, compatible with B'TWIN, MicroSHIFT and Shimano rear derailleurs.Urban Drivestyle has these components installed.
FEATURES
Light shifting operation, wider compatibility, and suitable for internal cable routing
Slim main lever body
RAPIDFIRE PLUS
Streamlined cockpit experience
Gear display positioned below the handlebar
Numbered gear display indicates gear position at a glance
OPTICAL GEAR DISPLAY
FEATURES
Light shifting operation, wider compatibility, and suitable for internal cable routing
Slim main lever body
RAPIDFIRE PLUS
Streamlined cockpit experience
Gear display positioned below the handlebar
Numbered gear display indicates gear position at a glance
OPTICAL GEAR DISPLAY
SL-M300 Trigger Shifter 7-spd right
Right hand indexed shifter with user-friendly Wide View gear indicator window. Comes in 7-speed version
Features:• Shimano 7-speed compatible• Precise and consistent index shifting• Piston design creates short linear release movement• Wide View gear indicator• Direct Connection clamp brings levers closer to hands• Galvanized steel cable• Weight: 127 grams
Urban Drivestyle hat diese Bauteile verbaut.
48V Charger for Li-Ion Battery with DC Plug
Input: 110 - 240 V ~ 50/60 Hz 2.0 A
Output: 54,6V 2.0 A
Operating and storage temperature: 0 ~ 30° C (~ 32 - 86 ° F)
low noise
complies with all European standards
Note: The charger housing may differ from the illustration.