ELECTRA Gigi original Front Fender 26" Cream white
26"
NOS
painted with orange/light blue checks
without fixing material and Stays
Scope of delivery: 1 Front Fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 830 mm (~32.68 inches)
Diameter inside: ~ 580 mm (~ 22.83 inches)
Diameter outside: ~ 650 mm (~ 25.59 inches)
ELECTRA Rally Sport original Rear Fender 26" grey
26"
NOS
painted with silver Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 540 mm (~21.26 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 495 mm (~ 19.49 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
ELECTRA Rally Sport original Front Fender 26" grey
26"
NOS
painted with silver Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Front fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 400 mm (~15.75 inches)
Diameter inside: ~ 305 mm (~ 12.01 inches)
Diameter outside: ~ 380 mm (~ 14.96 inches)
ELECTRA Rally Sport original Rear Fender 26" mettalic red
26"
NOS
painted with silver Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 540 mm (~21.26 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 495 mm (~ 19.49 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
ELECTRA Betty original Front Fender 20" white
20"
NOS
without fixing material and Stays
Scope of delivery: 1 Front Fender
Wide: ~ 70 mm (~ 2.76 inches)
Height: ~ 20 mm (~ 0.79 inches)
Lenght in circumference: ~ 530 mm (~ 20.87 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 450 mm (~ 17.72 inches)
ELECTRA Rally Sport original Front Fender 26" white
26"
NOS
painted with black/red Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Front fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 400 mm (~15.75 inches)
Diameter inside: ~ 305 mm (~ 12.01 inches)
Diameter outside: ~ 380 mm (~ 14.96 inches)
Race Bike Stem Alu 26,6 mm
ITALMANUBRI
NOS = New Old Stock 80s
alu
26,6 mm (~1,05 inches) shaft
140 mm (~5,5 inches) shaft height (min. insert to position of saddle)
Made in Italy
UNIVERSAL QUICK RELEASE BIKE SKEWER SILVER NEW
for Frontwheel
NOS = New Old Stock
Axle length: ~ 125 mm ( ~ 4,9 inch)
Axle diameter: ~ 4,8 mm (~0,19 inch)
Joytech
102F
SJ - KS
Lever-Nut
Steel - Steel
Axle
Cr - Mo
Front Quick Release
Detto Pietro Mod. 230 Comfort Blue
Made in Italy late 1980s
Size 42 (turns out a little smaller)
Genuine Leather
Cleats for toeclip pedals von Pavarin
Historical Racing Bike shoes which fits wonderful to L'Eroica
NOS New Old Stock - New in box
New in box from the late 1980s
Size 42
A very rare piece of history.
Vintage Ciclolinea front fender for racing bikes 28" yellow
28"
NOS new old stock from the 1980s
Made in Italy
Scope of delivery: 1 front fender
material: plastic
Height: approx. 15 mm ( ~ 0.59 inch)
Width: approx. 35 mm ( ~ 1.38 inch)
Length at circumference of fender: approx. 385 mm ( ~ 15.16 inch)
Dimensions of the fork mounts: 21 mm x 25 mm ( 0.83 x 0.98 inch)
Distance centre-to-centre of the fork mounts: approx. 60 mm ( ~ 2.36 inch)
Contrary to the assembly instructions, there are no Velcro fasteners.
Weight: ~ 35 g
Vintage Ciclolinea front fender for racing bikes 28" white
28"
NOS new old stock from the 1980s
Made in Italy
Scope of delivery: 1 front fender
material: plastic
Height: approx. 15 mm ( ~ 0.59 inch)
Width: approx. 35 mm ( ~ 1.38 inch)
Length at circumference of fender: approx. 385 mm ( ~ 15.16 inch)
Dimensions of the fork mounts: 21 mm x 25 mm ( 0.83 x 0.98 inch)
Distance centre-to-centre of the fork mounts: approx. 60 mm ( ~ 2.36 inch)
Contrary to the assembly instructions, there are no Velcro fasteners.
Weight: ~ 35 g
Vintage Original Specialites TA Drinking Bottle white/blue 750 ml
NOS new old stock
volume: 750 ml
Made in France
Material: polyethylene
Weight: 100g
Item may show signs of storage
Urban Drive Style Controller 36V
Rated voltage: 36V
off Voltage: 30 +/- 1V:
Electric current: 15A +/- 1 A
Brakes Level: Low
Ordinary Booster
Nine Speed 20"
Original Item from Urban Drivestyle Berlin
48V Charger for Li-Ion Battery with DC Plug
Input: 200 - 240 V ~ 50/60 Hz 1.8 A (max)
Output: 54.6V 3.0 A
Operating and storage temperature: 0 ~ 30° C (~ 32 - 86 ° F)
low noise
complies with all European standards
Note: The charger housing may differ from the illustration.
Quick release axle Shimano for the front wheel, black
This SHIMANO quick release is suitable for use with all common front wheels with hollow axle. The steel axle is clamped via a lever. The lever can be operated with low forces and works with minimal wear.
Application: MTB, road bike, city bike, etc.
For installation width: 100 mm
Axle length: 129 mm
Axle diameter: 5 mm
Color quick release lever and lever nut: Black
Color adjusting nut: Black
Lever: Steel
Axle: Steel
Quick release axle Shimano for the front wheel, silver
This SHIMANO quick release is suitable for use with all common front wheels with hollow axle. The steel axle is clamped via a lever. The lever can be operated with low forces and works with minimal wear.
Application: MTB, road bike, city bike, etc.
For installation width: 100 mm
Axle length: 133 mm
Axle diameter: 5 mm
Color quick release lever and lever nut: Silver
Color adjusting nut: Black
Lever: Steel
Axle: Steel
Spacer ring aluminium Ø 35 mm, 2 mm high, black
Inner diameter: 35 mm / 1.38 inches
Outer diameter: 40 mm / 1.57 inches
Height: 2 mm / 0.078 inches
Colour: black
Material: aluminium
Tektro Auriga Comp IS2000/PM AQ Adapter A4 180mm HR
This adapter is for use of a 180 mm disc in combination with Tektro Auriga Comp Postmount brakes on frames with an IS2000 brake mount.Details:
PM brake caliper to IS frame.
material: aluminium
for rear
for 180mm brake disc
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Universal Fender clip stainless 124 mm
fits up to ~ 140 mm fender width
Length: ~ 142 mm
Width: ~ 25 mm
Height: ~ 28 mm
easy to mount for front or rear fender
Reflector E1 for Racktime I-Valo Herrmanns tube, red StVZO
Product description General: The LED rear light set from Herrmanns was designed to fit the Racktime luggage carrier I-Valo. The slim design of the LED strip blends in perfectly with the sporty design of the luggage rack. The electronics are well protected in the housing of the reflector mounted below.
The reflector with housing is offered here. The reflector has StVZO approval.
Scope of delivery:1x reflector with housing
204 Bafang wheel front die-cast aluminium, 20 x 4
Technical specifications front wheel:
Position: front wheel
Wheel diameter (inches): 20
Colour: Black / Silver
Installation parameters front wheel:
Installation width: 135 mm
Max. Diameter rim: 422 mm
Brake: Disc brake mount, 44 mm 6 hole
Special features:
Including installation material like pictured.
Weight: ~ 3,3 kg
Dimensions:
Dim A
100 mm
Dim B
76.6 mm
Dim C
422 mm
Dim D
44 mm
Dim E
33 mm
Dim F
2-M12X1.25-6g
Dim G
0
Dim H
26.5 mm
Dim I
15.25 mm
Dim OLD
175 mm
Dim WL
87.5 mm
Dim WR
87.5 mm
Cruiser Saddle diamond quilting, white
outstanding quality, leather-appearance, chrome plated frame
with spring system
2 compression springs
with saddle clamp
dimensions: about 260 x 260 mm (~10,24 x 10,24 inches)
Chain Cover Original ELECTRA Amsterdam green
painted with sticker
dimensions: ~ 735 x 210 mm (~28,94 x 8,27 inches)
Front hole outer side: diameter ~105 mm ( ~ 4 ,13 inch)
Front hole inner side: diameter ~ 34,5 mm ( ~ 1,35 inch)
Overall diameter: ~200 mm ( ~ 7,87 inch)
Overall diameter for the sproket ~ 127 mm ( ~ 5 inch)
Chain Cover Original ELECTRA Hawaii pink
painted with sticker
for 16 inch Kidsbikes
dimensions: ~ 305 x 120 mm (~12 x 4,72 inches)
distance between oblong holes: about 215 - 228 mm (~8,46 - 8,97 inches)
Greaser mudguard beige
original set
pair for front and rear
width: 80 mm, 3,15 inch
Due to the front attachment, the mudguard is specially designed for the Greaser.
Original GANT 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 8
Color: white / red
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer
NOS New Old Stock ~ 1970s - 1980s
Original GANT 1970s vintage gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 11
Color: white / red
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer
NOS New Old Stock ~ 1970s - 1980s
Original GANT Lautaret 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted cotton
Inner hand: finest soft glove leather with light padding
Size: 12
Color: light grey leather with white cotton with black, red and yellow stripes
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
NOS New Old Stock ~ 1970s - 1980s
Original GANT vintage bicycle gloves
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: finest soft glove leather
Inner hand: finest soft glove leather with light padding
Size: 11
Color: light grey leather
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
NOS New Old Stock ~ 1970s - 1990s
Original GANT 1970-90s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 9
Color: white / blue
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Aravis
NOS New Old Stock ~ 1970s - 1990s
ELECTRA Betty original Front Fender 24" white/grey
24"
NOS
painted with with pink flames
without fixing material and Stays
Scope of delivery: 1 Front Fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 730 mm (~ 28.74 inches)
Diameter inside: ~ 520 mm (~ 20.47 inches)
Diameter outside: ~ 595 mm (~ 23.43 inches)
ELECTRA Rally Sport original Rear Fender 26" mettalic light green
26"
NOS
painted with white Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 540 mm (~21.26 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 495 mm (~ 19.49 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
€39.95*
This website uses cookies to ensure the best experience possible. More information...