ELECTRA Betty original Front Fender 24" white/grey
24"
NOS
painted with with pink flames
without fixing material and Stays
Scope of delivery: 1 Front Fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 730 mm (~ 28.74 inches)
Diameter inside: ~ 520 mm (~ 20.47 inches)
Diameter outside: ~ 595 mm (~ 23.43 inches)
ELECTRA Rally Sport original Rear Fender 26" mettalic light green
26"
NOS
painted with white Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 540 mm (~21.26 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 495 mm (~ 19.49 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
ELECTRA Rosie original Front Fender 26" pearl white
26"
NOS
painted with red rose
without fixing material and Stays
Scope of delivery: 1 Front Fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 830 mm (~32.68 inches)
Diameter inside: ~ 580 mm (~ 22.83 inches)
Diameter outside: ~ 650 mm (~ 25.59 inches)
ELECTRA Rally Sport original Rear Fender 26" white
26"
NOS
painted with red/black Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 540 mm (~21.26 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 495 mm (~ 19.49 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
ELECTRA Rally Sport original Front Fender 26" metallic blue
26"
NOS
painted with white Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Front fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 400 mm (~15.75 inches)
Diameter inside: ~ 305 mm (~ 12.01 inches)
Diameter outside: ~ 380 mm (~ 14.96 inches)
ELECTRA Rally Sport original Rear Fender 26" mettalic blue
26"
NOS
painted with silver Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Rear fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 540 mm (~21.26 inches)
Diameter inside: ~ 390 mm (~ 15.35 inches)
Diameter outside: ~ 495 mm (~ 19.49 inches)
On the rear Fender, on the chain side, there is a standard housing for the chain run
Carrier alu blue fits 27/28 inch tires
NOS New Old Stock ~ late 1990s
Made in Taiwan
Usage
City, Crossrad, Streetracer
Alu Die-Cast
Package comes with
one carrier
including adjustable bracket for mounting on the seat post clamping screw
including strut bracket with rubber cover and stainless screws
including reflector bracket
Material
Color: blue
Attachments on eyelets, seat stay or chain stay
Stainless screw connectors
Technical specification:
Number of struts: 6
Strut attachment to the braze-on base of the frame dropout or seat stay or chain stay
Strut length 340 mm
Weight rack: light ~ 480 g
Dimensions of the rack: ~ 315 x 130 mm
Mini Pump purple
universal pump head for following valve: Dunlop, Auto and Sclaverand
aluminium and plastic
quality by Presta Made in Germany
with bracket beside the bottle cage
length: about 22 cm
with adapter for AV
Detto Pietro Mod. 230 Comfort Red
Made in Italy late 1980s
Size 41 (turns out a little smaller)
Genuine Leather
Cleats for toeclip pedals von Pavarin
Historical Racing Bike shoes which fits wonderful to L'Eroica
NOS New Old Stock - New in box
New in box from the late 1980s
Size 41
A very rare piece of history.
ELECTRA Rally Sport original Front Fender 26" metallic orange
26"
NOS
painted with white Stripes
Short Fender
without fixing material and Stays
Scope of delivery: 1 Front fender
Wide: ~ 80 mm (~ 3.15 inches)
Height: ~ 26 mm (~ 1.02 inches)
Lenght in circumference: ~ 400 mm (~15.75 inches)
Diameter inside: ~ 305 mm (~ 12.01 inches)
Diameter outside: ~ 380 mm (~ 14.96 inches)
SKS Mountain Range Fender set blue 28 inch
28"
NOS New Old Stock from the 1980s
Made in W. Germany
Stays and fixing material included - stainless steel and brass
Scope of delivery: 1 front fender; 1 rear fender comes with rear dynamo light according to german street law
Bracket for seat stay moveable
Including electrical connection socket and electrical connection in the fender for the rear light
An indentation for the chain is standard on the rear fender
Material: Plastic
Height: approx. 19 mm ( ~ 0.75 inch)
Width: approx. 60 mm ( ~ 2.36 inch)
Length of rear fender circumference: approx. 1075 mm ( ~ 42.32 inch)
Diameter inside rear fender: approx. 660 mm ( ~ 25.98 inch)
Outer diameter of rear fender: approx. 700 mm ( ~ 27.56 inch)
Length around front fender: approx. 640 mm ( ~ 25.2 inch)
Diameter inside front fender: approx. 510 mm ( ~ 20.08 inch)
Diameter outside front fender: approx. 565 mm ( ~ 22.24 inch)
Vintage Ciclolinea front fender for racing bikes 28" grey
28"
NOS new old stock from the 1980s
Made in Italy
Scope of delivery: 1 front fender
material: plastic
Height: approx. 15 mm ( ~ 0.59 inch)
Width: approx. 35 mm ( ~ 1.38 inch)
Length at circumference of fender: approx. 385 mm ( ~ 15.16 inch)
Dimensions of the fork mounts: 21 mm x 25 mm ( 0.83 x 0.98 inch)
Distance centre-to-centre of the fork mounts: approx. 60 mm ( ~ 2.36 inch)
Contrary to the assembly instructions, there are no Velcro fasteners.
Weight: ~ 35 g
Aluminium Rim 26 inch., 56 mm (~2.20 inches) wide
ETRTO: 559
single wall
rim aluminium 26 inch
Wide:
56 mm (~2,20 inches)
inner size:
50 mm (~1,97 inches)
Holes:
36
colour:
high polished
Rim diameter ERD for calculating the spoke length:
540 mm (~21,26 inches)
Weight:
850 g (~1,87 pounds)
Knobby Tire 26 x 2.125 black
26 x 2.125
57 x 559
black
This tire fits on all 26" Classic Cycle rims up to 57 mm width! But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast.
Weight: ~ 910 g / 2 lbs.
Thumb throttle / Thumb gas / Hand throttle
Cable length approx. 47 cm / 18.5 inches
For mounting on the right-hand side of the handlebar.
Fits all handlebars with a diameter of 22.2 mm / 0.87 inches.
Original UDX hardtail frame, black matte
Build your own e-bike!
Made in Europe!
Details:
Paintwork: black matte powder-coated - slight traces due to production or storing may occur
Steel
Hardtail
Possible rim and tyre sizes: 20" rims up to 102 mm / ~4 inches width, maximum tyre size 20 x 4.0
Bottom bracket: BSA 120 mm / 4,72 inches
Head tube diameter: 44 mm / 1,73 inches (measured inside)
Seatpost mount for 32 / 1,26 inches mm seatposts
Disc brake mount: yes
Coaster brake mount: no
derailleur: yes
Side stand plate: yes
Various mounting points on the rear triangle
Head tube length: 150 mm / 5,90 inches
Rear triangle width: 195 mm / 7,67 inches
Dimensions:
seat post mount -> head tube: ~ 565 mm / 22,24 inches
seat post mount -> bottom bracket: ~ 470 mm / 18,5 inches
seat tube: ~ 440 mm / 17,32 inches
Weight: ~ 5.8 kg / 12,78 lbs
various mounting points for e.g. batteries, controller....
Original frame from the UDX bike series by Urban Dirvestyle Berlin!
Original UDX hardtail frame, neon-orange
Build your own e-bike!
Made in Europe!
Details:
Paintwork: neon-orange powder-coated - slight traces due to production or storing may occur
Steel
Hardtail
Possible rim and tyre sizes: 20" rims up to 102 mm / ~4 inches width, maximum tyre size 20 x 4.0
Bottom bracket: BSA 120 mm / 4,72 inches
Head tube diameter: 44 mm / 1,73 inches (measured inside)
Seatpost mount for 32 / 1,26 inches mm seatposts
Disc brake mount: yes
Coaster brake mount: no
derailleur: yes
Side stand plate: yes
Various mounting points on the rear triangle
Head tube length: 150 mm / 5,90 inches
Rear triangle width: 195 mm / 7,67 inches
Dimensions:
seat post mount -> head tube: ~ 565 mm / 22,24 inches
seat post mount -> bottom bracket: ~ 470 mm / 18,5 inches
seat tube: ~ 440 mm / 17,32 inches
Weight: ~ 5.8 kg / 12,78 lbs
various mounting points for e.g. batteries, controller....
Original frame from the UDX bike series by Urban Dirvestyle Berlin!
Lamp holder for front headlights, white
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: White
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
204 Front wheel complete with tyre and tube 20 x 4 - 80 mm wide
20 inch Fat Bike front wheel
black matte anodized alu rim,
36 Spokes 2,6 mm
Hub: silver
disc brake mount 44 mm 6 holes
over locknut dimension: 135 mm
rim width: 80 mm
ready assembled
with rim tape and tube
with Kenda Krusade tire
weight ~ 3200 g
This Items was produced for Urban Drive Style UDX Model
Gazelle 28 inch bicycle forkFor 28 inch wheels with hubs of 100 mm installation width.Shaft with external thread Ø 25.2mm.weight approx. 1 kghave traces of storageBrake drum brakeBracket for dynamocolour black / chromeScope of delivery: 1 piece
Steerer length
220 mm
Steerer diameter / stem width:
28,5 mm
Steerer diameter at cone seat:
28,6 mm
Installation hight:
340 mm
For Hub width:
135 mm
Original fork from the UDX bike series from Urban Drivestyle Berlin!
One original mudguard set from UD Uni Micro for 16 inch black mattFront and rear mudguard in matt black59 mm wide Colour: matt blackOriginal mudguard from UD Uni MicroFits also very well on the frame https://classic-cycle.de/alle/4007/original-ud-uni-micro-rahmen-schwarz-matt?c=440Scope of delivery: front and rear mudguard, brace for mounting and bracket.
Conical spacer from Ritchey for semi-integrated headsets.
Spacers made of high-strength plastic for the steerer tube to adjust the height of the stem and handlebar.Conically shaped for a more beautiful appearance
Material plasticfor 1 1/8" steerer tubeColor matte blackHeight 15 mmDiameter inside: 29 mmDiameter outside bottom: 50 mmDiameter outside top: 36 mmWeight ~ 11 g
Tektro brake pads organic for disc brakes E10.11 green(organic) especially low noise - slightly higher wearThe Tektro brake pad pair is compatible with both cable and hydraulic brakes of the Uni MK series.hydraulic brakes of the Uni MK, as well as for other bikes and e-bikes.Compatible only for Tektro 350e brakeScope of delivery: two brake shoes and one spring clip
Shimano Deore HB-M510 VIA M
Front hub 36-hole aluminum, silver
Axle length: 108 mm / 4,25 inches, M9
Installation width: 100 mm / 3,94 inches
Flange width: 71.6 mm / 2,82 inches
Bolt circle diameter PCD: 42 mm / 1,65 inches
Number of holes: 36 holes
Weight: 170 g / 0,375 lbs
Silver aluminum hub
with quick release 133 mm / 5,24 inches (5-1/4")
for rim brake
Shimano Deore HB-M590
Front hub 32-hole aluminum, silver
Axle length: 108 mm / 4,25 inches, M10
Installation width: 100 mm / 3,94 inches
Flange width: 71.6 mm / 2,82 inches
Bolt circle diameter PCD: 38 mm / 1,5 inches
Number of holes: 32 holes
Weight: ~ 145 g / 0,320 lbs
Silver aluminum hub
with quick release 133 mm / 5,24 inches
for rim brake
Shimano Deore HB-M530
Front hub 36-hole aluminum, silver
Axle length: 108 mm / 4,25 inches, M10
Installation width: 100 mm / 3,94 inches
Flange width: 71.6 mm / 2,82 inches
Bolt circle diameter PCD: 38 mm / 1,5 inches
Number of holes: 36 holes
Weight: ~ 145 g / 0,320 lbs
silver aluminum hub
with quick release 133 mm / 5,24 inches
for rim brake
Silverfish battery 36V 19.7Ah 709Wh
Powerful e-bike batteries made in Germany in the standardized Silverfish battery case.
Our 36V lithium-ion Silverfish battery impresses with high quality workmanship and durability - made in Germany. It contains high quality LG cells and allows a range of up to 100km*.The battery has an internal BMS module for regulated charging and discharging, a CE/ROHS certificate and comes with a pair of battery keys.
The battery ignition lock has three positions: Unlock, Off, On - due to the design, the battery fits any UNI MK, Bobber, Swing e-bike and can be replaced in a flash.
Features of the battery
Manufacturer: LG cells in Silverfish housing
Voltage: 36V
Capacity: 709Wh = 36V x 19.7Ah
Charging: XLR-3
Dimensions: H 41cm x D 11cm x W 7cm
Weight: ~ 4,5 kg
Compatibility Type / Design: UNI MK Classic/Swing/Bobber
BMS (= Battery Management System)
CE/ROHS certificate
Includes: Battery + Key
Made in Germany
Original replacement battery from Urban Drivestyle Berlin, with UD logo!
* Range is approximate and can vary greatly (rider:in weight, terrain, tire pressure, temperature, etc.).
Quick release axle Shimano XT for the front wheel
For installation width: 100 mmAxle length: 133 mmAxle diameter: 5 mmColor quick release lever and lever nut: SilverColor adjusting nut: Black
Quick release axle SUNringlé for the rear wheel, black
Application: MTB, road bike, city bike, etc.
For installation width: 135 mm
Axle length: 168 mm
Axle diameter: 5 mm
Color quick release lever and lever nut: Black
Color adjusting nut: Black
Lever: Aluminum
Axle: Steel
Double crown fork 570 mm chrome plated 1 inch shaftchrome-plated, 1 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 570 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2 kg
Disc Brake Adapter Front IS / PM TEKTRO A5 Disc 203 mm
TRP Tektro A5 IS/PM Adapter Front 203mmThe TRP Tektro A5 IS/PM adapter for fork with IS mount and 203mm brake disc in combination with postmount caliper.
Details:
Fork/frame type: IS (International Standard).
Brake caliper type: Postmount
Brake disc diameter: 203mm front
Weight: approx. 60 g
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Universal Fender clip stainless 40 mm
fits up to ~ 40 mm fender width
Length: ~ 46 mm
Width: ~ 29 mm
Height: ~ 20 mm
easy to mount for front or rear fender
Zéfal SPRING
Flexible bottle holder
In thermoplastic resin, the bottle cage provides excellent flexibility. The Spring is light and offers one of the best value on the market.
Characteristic
Weight: 46 g
Material: Thermoplastic resin
Color: Black
Made in Fance
Heavy duty strut / support strut for luggage racks and cargo decks
Material: Chromoly steel
Colour: black, powder coated
Dimensions:
Total length: 42.5 cm
Distance hole centre to hole centre, large: ~ 40.5 cm
Distance hole centre to hole centre, none: ~ 34 cm
The support strut was used on the "load and delivery deck low" from Urban Drivestyle!
Original spare part from Uban Drivestyle Berlin!
Silverfish battery 48V 19.2Ah 920Wh
Powerful e-bike batteries made in Germany in the standardized Silverfish battery case.
Our 48V lithium-ion Silverfish battery impresses with high quality workmanship and durability - made in Germany. It contains high quality LG cells and allows a range of up to 100km*.The battery has an internal BMS module for regulated charging and discharging, a CE/ROHS certificate and comes with a pair of battery keys.
The battery ignition lock has three positions: Unlock, Off, On - due to the design, the battery fits any UNI MK, Bobber, Swing e-bike and can be replaced in a flash.
Features of the battery
Manufacturer: LG cells in Silverfish housing
Voltage: 48V
Capacity: 920Wh = 48V x 19.2Ah
Charging: XLR-3
Dimensions: H 41cm x D 11cm x W 7,5 cm
Weight: ~ 4,5 kg
Compatibility Type / Design: UNI MK Classic/Swing/Bobber
BMS (= Battery Management System)
CE/ROHS certificate
Includes: Battery + Key
Made in Germany
Original replacement battery from Urban Drivestyle Berlin, with UD logo!
Note:From the V5 UNI Bike models (frame number starts with 05....) we only have 48V systems for 250W & Export versions!
* Range is approximate and can vary greatly (rider:in weight, terrain, tire pressure, temperature, etc.).
Aluminium Alloy Rim 27,5 inch., 57 mm (~2,24 inches) wide
ETRTO: 584 mm
single wall 57
Wide:
57 mm (~2,24 inches)
inner size:
50 mm (~1,97 inches)
Holes:
32
colour:
black matte
Rim diameter for calculating the spoke length:
559 mm (~22,01 inches)
Weight:
920 g (~2,03 pounds)
Classic Cycle Dual Springer Vintage Bicycle Fork
with Disc Brake mount
with 1 inch stem
Abraham Linkage Monark Fork
The most beautyful springer ever produced
up to 26 inch., adjustable springs
black with chrome-plated springs
1 inch stem = 25,4 mm
stem lengh: 215 mm
without thread for ahead headset
Width between Fork legs: 73mm
Axle mount width: 100 mm
Distance between fork crown and axle dropout: 385 mm
Weight: 2,74 kg
with mount for a brake arm and Disc brake (160mm max. rotor)
Original Classic Cycle Cruiser Springfork Model Monark