Grips for handlebar, rubber, black
Set consisting of:
1x short handle, length: ~ 64 mm / 2.5 inches
1x long grip, tapered, length: ~ 104 mm / 4.1 inches
Fits handlebars with 22.2 mm / 0.87 inches diameter.
UDX BMX Zoom Stem A-Head 1 1/8 Inch, black matte, 4 screws
aluminium body
detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches)
Nosing: 50 mm (~1,97 inches)
for 1 1/8 inch. a-head shafts / headsets 28,6 mm
MX-C631-8, ISO-M
Original UDX BMX part from Urban Drivestyle Berlin
Hope brake adapter B for PM on IS fork 203mm / rear triangle 183 mm silver.
Hope adapter for mounting postmount brakes on IS2000 fork or frame. Can be used for rear wheel with 183 mm brake disc or front wheel with 203 mm brake disc.
Please also note the data sheet below when choosing the right adapter!
Post Mount to IS
for 183 mm rear brake disc
for 203 mm front brake disc
incl. mounting bolts
silver
Lower Fork Crown with 1 inch Shaft for Triple Tree Fork with Adapter for 1 1/8 Heads
Forged aluminium fork crown with HiTen shaft
shaft length: 300 mm (~11,81 inches)
fork crown width: 122 mm (~4,8 inches) (center to center stand pipes)
for 32 mm (~1,26 inches) stand pipes
Fits with Article 1258
Donut Leather Grips, dark brown
In traditional leather manufacturer the grips are made of natural leather, the same long wearing leather used for the saddle tops. Each grip is made with a stack of 28 leather washers with alu endings.
1 Pair
Length: ~ 130 mm / 5,11 inch
For handelbars with 22 mm / 0,87 inch diameter.
Grips for handlebar, rubber, black for revoshifter
Set consisting of:
1x short handle, length: ~ 66 mm / 2.59 inches
1x long handle , length: ~ 110 mm / 4.33 inches
Fits handlebars with 22.2 mm / 0.87 inches diameter.
Handlebar Grips leather inlay black white long + short
Nice shaped for a strong and tight grip
Length: 125 mm+ 95 mm (~4,92 + 3,74 inches)
for 22 mm (~0,87 inches) diameter bars
Suits for revoshift on one side of handle bar only
comes with a moulded strong endcap
colour: black with white leather inlay with racing green seem
1 Pair
Made in Germany
Handlebar Tape black smooth Plastilac Gaufré NOS by Specialité Velox
colour: black
Material: smooth plastic
Length: 2.5 m per roll
NOS = New Old Stock
Delievery includes: 2 rolls which is enaough to complete one handle bar both sides
Made in France by ETS Velox 95100 Argenteuil
The tape is ideal for completing retro / period drop handlebars from the 1950's / 60's / 70's and would look great on a period bike for L'Eroica
UD handlebar grips in black plastic Early Version
Details:
1 pair
Length ~ 129 mm
Fits handlebars with 22 mm diameter.
Colour: black
The rubberised surface ensures optimum grip!
Urban Drivestyle lettering on the clamping ring.
The grip is securely screwed to the handlebar with the help of an aluminium clamping ring.
Includes: 2x plastic caps to close the handlebar ends, 1 pair of plastic grips, 2x aluminium clamping rings to fix the grips.
Original accessories from Urban Dirvestyle Berlin!
Double crown fork 750 mm chrome plated 1 1/8 inch shaftchrome-plated, 1 1/8 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 750 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: ~ 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.Weight: ~ 2.54 kg
Handlebar Grips leather inlay white short + short
Nice shaped for a strong and tight grip
Length: 95 mm+ 95 mm (~3,74 + 3,74 inches)
for 22 mm (~0,87 inches) diameter bars
Suits for revoshift on both side of handle bar
comes with a moulded strong endcap
colour: black with white leather inlay with black seem
1 Pair
Made in Germany
Grips for handlebar made of rubber, black
Details:
1 pair
Length ~ 130 mm / 5,11 inches
Fits handlebars with 22.2 mm / 0,87 inches diameter.
Colour: black
Spacer ring / Spacer Alu for 1 1/8" stems, 45 mm high
Inner diameter: 28,58 mm / 1,125 inches
Outer diameter: 36 mm / 1.42 inches
Height: 45 mm / 1.77 inches
Colour: black
Original stem / spacer of the UDX Bike series by Urban Drivestyle Berlin
Double Crown TSP Custom Fork raw
NEW !!!
Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Straight Italian Design guarantees reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
black matte
for 20 till 28 inch tires
up to 102 mm (~4 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down
with disk brake mount
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 107 mm (~4,12 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for rims up to 100 m (~3,94 inches).
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Handlebar Grips Delight white pink long long
Nice shaped for a strong and tight grip
Length: 125 mm (~4,92 inches)
for 22 mm (~0,87 inches) diameter bars
comes with a moulded strong endcap
colour: white with pink elypse and a pink rim
1 Pair
UD Leather Bicycle Grips Mellow Classic brown
Handlebar grips are one of the three points of contact a cyclist has with their bike - this highlights their importance! In addition to handiness and comfort, bicycle grips should be non-slip to ensure full control of the bike! Appearance only comes second - not with these luxury leather grips! They combine both - looks and functionality!
The luxury leather grips give your e-bike that special touch and underline the vintage moped look of the UNI MK! The high-quality processed leather gives the grips their stylish Mellow Classic look and shines with comfort and natural breathability. Available in brown or black, these bike grips refine your bike - whether UNI MK or not!
Features of the Luxury Leather Grips
Brand: Contec
Material: leather, aluminium grip clips
Colour: brown
Length: 125mm
Diameter: 22 mm
Includes: 2x plastic caps for closing the handlebar ends, 2x leather grips, 4x aluminium clamping rings for fixing, on Eurocard
High comfort with natural breathability
Mellow Classic design that emphasises the vintage look of the UNI MK
Original accessories from Urban Drivestyle Berlin, but of course also for all other bikes!
UDX BMX handlebar, matt black
Width: ~ 700 mm
Raise: ~ 180 mm
Hi-Ten steel
Stem mount: 22.2 mm
Distance between the mount and the top bar (measured centre to centre): ~ 120 mm
Diameter top bar: ~ 22.2 mm
Colour: matt black powder coated
Original handlebar from the UDX Bike Series by Urban Drivestyle Berlin!
Tektro Aries Sat left side for E-Bikes cut - off brakeBrake kit for use on e-bikesLever and bracket made of cast aluminium4-finger lever bladeBrake lever EL 350Brake caliper M306HTekro Aries mechanical brake with an adapter for 180 mm or rear for 160 mm disc.power cut - off brakeFunction of a power cut - off brakeThere is a sensor that sends a signal to the control unit when the brake lever is pulled to cut off the motor.Mounting side: leftWeight: 400 g.
Length of Cable: ~ 100 cmScope of delivery: brake lever and brake caliper with brake pads
Handlebar CRAB, raw
This massive handle bar could be the crown of your custom bike.
Built with square tubes combined with the regular 22,2 mm round tubes for the stem and grips.
The handlle bar is raw, unpainted and fresh from manufacturer
Specification:
Material: Steel
Width: ~ 830 mm ( ~ 32,67 inch)
Diameter of round tubes: 22,2 mm ( ~ 0,87 inch)
Width of square tube: 155 mm ( ~ 6,10 inch)
Length of grip tube: ~ 190 mm ( ~ 7,5 inch)
Width of stem mount : ~ 75 mm ( ~ 2,95 inch)
Height: ~ 105 mm ( ~4,13 inch)
Raising: 0 mm
Weight: ~ 1 kg ( ~ 2,20 lbs)
UDX BMX handlebar, black shorty
610 mm wide
rise 22 cm
Hi-Ten steel
Stem mount: 22.2 mm
Distance between the mount and the topbar: ~ 140 mm
Diameter topbar: ~ 22.2 mm
Original handlebar from the UDX Bike Series by Urban Drivestyle Berlin!
Fahrradkorb oder Lenker Deko Blumengirlande rosa
Schönes Accessoire für den Lenker, für den Vorbau, für das Oberrohr oder oder oder. Deiner Phantasie sind keine Grenzen gesetzt.
Dieses zauberhafte Detail ist sehr leicht und ohne Werkzeug zu montieren.
Dekoriere dein Fahrrad nach deinem Belieben und werde zum Blickfang aller. Mache dein Fahrrad mit diesen Blumen zu einem Unikat.
Länge: ca. 130 cm
UD Leather Bicycle Grips Mellow Classic black
Handlebar grips are one of the three points of contact a cyclist has with their bike - this highlights their importance! In addition to handiness and comfort, bicycle grips should be non-slip to ensure full control of the bike! Appearance only comes second - not with these luxury leather grips! They combine both - looks and functionality!
The luxury leather grips give your e-bike that special touch and underline the vintage moped look of the UNI MK! The high-quality processed leather gives the grips their stylish Mellow Classic look and shines with comfort and natural breathability. Available in brown or black, these bike grips refine your bike - whether UNI MK or not!
Features of the Luxury Leather Grips
Brand: Contec
Material: leather, aluminium grip clips
Colour: black
Length: 125mm
Diameter: 22 mm
Includes: 2x plastic caps for closing the handlebar ends, 2x leather grips, 4x aluminium clamping rings for fixing, on Eurocard
High comfort with natural breathability
Mellow Classic design that emphasises the vintage look of the UNI MK
Original accessories from Urban Drivestyle Berlin, but of course also for all other bikes!
Extra Wide Lower Fork Crown with 1 inch Shaft for Triple Tree Fork with Adapter for 1 1/8 Heads
Aluminium fork crown with HiTen shaft
shaft length: 300 mm (~11,8 inches)
fork crown width: ~ 177 mm (~6,97 inches) (center to center stand tubes)
for 32 mm (1,26 inches) fork legs
Fits with Article 1260
UD 204 Suspension fork for fatbike air suspension, matt black
For 20 inch wheels with hubs of 135 mm installation width.
Adjustable preload.
1 1/8" shaft Ahead
Distance between axle centre and shock tower: ~ 330 mm
Distance between axle mount and end of uprights: ~ 430 mm
Weight approx. 2.2 kg (with 220 mm shaft)
For disc brake disc (160 mm without adapter) PostMount
Scope of delivery: 1 piece
Steerer length
220 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
465 mm
For Hub width:
135 mm
Travel:
~ 100 mm
Suspension:
Air in left stanchion
Damping:
Oil in right stanchion
Distance between steerer tubes at tyre height:
~ 115 mm
Original fork of the bikes from Urban Drivestyle Berlin!
UD 204 Double Crown Suspension Fork Fatbike, matt black
For 20 inch wheels with hubs of 135 mm installation width.
1 1/8" shaft Ahead
Distance between axle centre and shock tower: ~ 325 mm
Distance between axle mount and end of uprights: ~ 600 mm
Weight approx. 2.7 kg (with 270 mm shaft)
For disc brake disc (160 mm without adapter) PostMount
Scope of delivery: 1 piece
Steerer length
270 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
420 mm
For Hub width:
135 mm
Travel:
~ 100 mm
Suspension:
unidentified
Damping:
unidentified
Distance between steerer tubes at tyre height:
~ 120 mm
Original fork of the bikes from Urban Drivestyle Berlin!
Grips for handlebar made of rubber, orange
Make your bike colourful!
Details:
1 pair
Length ~ 130 mm / 5,11 inches
Fits handlebars with 22.2 mm / 0,87 inches diameter.
Colour: orange
Disc brake adapter from Magura QM12, IS to PM.
Adapter enables the use of 160 / 180 mm brake discs on forks and rear triangle with IS 6" mount.
The adapter is screwed onto the IS mount of the fork or frame and allows the use of a postmount brake caliper.
Front brake disc: 180 mm
rear brake disc: 160 mm
Fork mount: IS 6
rear mount: IS 6"
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Disc brake adapter from Magura QM 5, IS to PM.
Adapter enables the use of 203 mm brake discs on forks with IS 6" mount.
The adapter is screwed onto the IS mount of the fork and allows the use of a postmount brake caliper.
Front brake disc: 203 mm
Fork mount: IS 6
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Adapter for disc brake PM-PM-F180
The front adapter is designed to mount a Post Mount (PM) standard brake caliper to a frame with the same PM standard.
In this version it allows the use of a 180 mm brake disc on the fork.
Post Mount bracket
for 180 mm front brake disc
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Tektro EL 350 cn right side (only for e-bikes)Brake lever for use on e-bikesFor use also with linear pull brakes and Rapidfire shiftersLever and bracket made of cast aluminium4-finger lever bladepower cut - off brakeFunction of a power cut - off brakeThere is a sensor that sends a signal to the control unit when the brake lever is pulled to switch off the motor.Mounting side: rightWeight: 108 g.Scope of delivery: 1 piece
Avantgarde genuine leather grips on chrome-plated steel, Light Brown
High quality and handmade leather grips, 100% genuine leather on chrome steel base
Suitable for all bicycle handle bars
22,3 mm (~0,88 inches) inner diameter, easy to install with 2 Allen screws.
Material: genuine leather and chrome steel
Size: 12,5 cm (~4,92 inches) long
Weight: 176 g (~0,39 pounds)
Light Brown
1 Pair
Made in Europa
Stem Steel black Humpert Ergotec CV 101
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
150 mm (~5,90 inches) shaft height
60 mm (~2,36 inches) nosing with 15° angle
Using a single bolt mount won't recommend handle bars with big hights.
Stem Steel Black Humpert Ergotec CV 100
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black steel
Handlebar mount with single bolt: 25,4 mm (~1 inch)
25,4 mm (~1 inch) shaft
150 mm (~5,91 inches) shaft height
100 mm (~3,94 inches) nosing with 40° angle
Using a single bolt mount won't recommend handle bars with big hights.
Raw Beast - Production sample
Unique combination of fork and handlebar!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
Length of the round grip tubes: ~ 165 mm / 6,5 inches
Diameter of the round handle tubes: 22.2 mm / 0,87 inches
Handlebar width: ~ 740 mm / 29,13 inches
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 250 mm / 9,84 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 1000 mm / 39,37 inches
Distance axle mount - lower edge lower bridge: ~ 430 mm
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 100 mm / 3,93 inches
Color: without, raw
Weight: approx. 6.15 kg / 13,56 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Fahrradkorb oder Lenker Deko Blumengirlande weiß
Schönes Accessoire für den Lenker, für den Vorbau, für das Oberrohr oder oder oder. Deiner Phantasie sind keine Grenzen gesetzt.
Dieses zauberhafte Detail ist sehr leicht und ohne Werkzeug zu montieren.
Dekoriere dein Fahrrad nach deinem Belieben und werde zum Blickfang aller. Mache dein Fahrrad mit diesen Blumen zu einem Unikat.
Länge: ca. 130 cm
Fahrradkorb oder Lenker Deko Blumengirlande rot
Schönes Accessoire für den Lenker, für den Vorbau, für das Oberrohr oder oder oder. Deiner Phantasie sind keine Grenzen gesetzt.
Dieses zauberhafte Detail ist sehr leicht und ohne Werkzeug zu montieren.
Dekoriere dein Fahrrad nach deinem Belieben und werde zum Blickfang aller. Mache dein Fahrrad mit diesen Blumen zu einem Unikat.
Länge: ca. 130 cm
Stem Steel black Humpert Ergotec CV 102
Original NOS from Humpert Germany
NOS= New Old Stock
Oldschool 70-90s
black
Handlebar mount with single bolt: 25,4 mm (~1 inch)
22,2 mm (~0,87 inches) shaft
170 mm (~6,69 inches) shaft height
80 mm (~3,15 inches) nosing with 45° angle
.Using a single bolt mount won't recommend handle bars with big hights
Donut Leather Grips, blackIn traditional leather manufacturer the grips are made of genuine leather, the same long wearing leather used for the saddle tops. Each grip is made with a stack of 25 leather washers with alu endings.1 Pair
Spring Beast Black
Unique Suspension Fork!
Exclusively available at Classic Cycle!
Extraordinary custom fork for a rims up to 102 mm width.
Stability meets extravagance!
The square tubes and the striking design will make your custom bike an absolute eye-catcher!
Details:
For 20 to 28 inch tires
up to 102 mm / 4,02 inches rim width
1 1/8 inch shaft
shaft length: 240 mm / 9,45 inces, for frame heads up to 210 mm / 8,27 inches
with disc brake mount
Total length: ~ 800 mm / 31,5 inches
Distance axle mount - lower edge lower bridge: ~ 400 mm / 15,75 inches
side length of fork tubes: 25 mm / 0,98 inches
width between fork tubes: 140 mm / 5,51 inches
Width in the axle mount / hub width: 110 mm / 4,33 inches
adjustable spring
Color: black, powder coated
Weight: approx. 6.35 kg / 14 lbs
The fork is easy to assemble using screws and assembly instructions included.
Made in Europe
Spacer Box / Spacer Ring Set Alu for 1 1/8" , 24 pieces
Spacers for A-Head forks
24 spacers
4 x 2 mm
6 x 5 mm
6 x 10 mm
4 x 15 mm
4 x 20 mm
Inner diameter: ~ 28.8 mm /1 1/8"
Outer diameter: ~ 35.8 mm
Colour: black
Material: aluminium
Original accessories from Urban Drivestyle Berlin!
Tracker Handlebar 620 mm (~24,41 inches) silver
Steel
Width: 620 mm (~24,41 inches)
Height: 37 mm (~1,46 inches)
for 25,4 mm (~1 inch) stems
Length of grip: 190 mm (~7,48 inches)
Angel: 37°
aluminium look
Weight: 542 g (~1,19 pounds)
€19.95*
€24.95*(20.04% saved)
This website uses cookies to ensure the best experience possible. More information...