Tektro Aries Sat right side rear for e-bikes with breaker contact.
Brake kit for use on e-bikes
Lever and bracket made of a cast aluminum
4-finger lever blade
Brake lever EL 350
Brake caliper M306H
Tekro Aries mechanical brake with an adapter for 180 mm front or rear for 160 mm disc.
power cut - off brake
Function of a power cut - off brake
There is a sensor that sends a signal to the control unit when the brake lever is pulled to cut off the motor.
Mounting side: right
Weight: ~ 448 g.
Length of the Bowden cable: ~ 175 cm
Scope of delivery: brake lever, Bowden cables and brake caliper with brake pads.
Tektro Auriga Comp IS2000/PM AQ Adapter A4 180mm HR
This adapter is for use of a 180 mm disc in combination with Tektro Auriga Comp Postmount brakes on frames with an IS2000 brake mount.Details:
PM brake caliper to IS frame.
material: aluminium
for rear
for 180mm brake disc
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Order-No: CSR-001
T-Shirt "PG" GoGo, light grey
with PimpGarageTM imprint on the front and dancing girl on the back
high quality cotton
please choose Your size: S, M, L, XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
Order-No: CSR-004
T-Shirt "PG", green
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
Order-No: CSR-008
Longsleeve-Shirt "PG", light grey
with PimpGarageTM imprint on the right sleeve and big crown logo on the back
high quality cotton
please choose Your size:
S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 34,99 !!!
Greaser mudguard beige
original set
pair for front and rear
width: 80 mm, 3,15 inch
Due to the front attachment, the mudguard is specially designed for the Greaser.
The perfect gift for all hobbyists!
The Classic Cycle voucher worth 10,- €
Redeemable on the entire product range of Classic-Cycle.de
Just put the voucher in the shopping cart and complete the order process. You will receive the coupon code from us after receiving the payment as a PDF attached to the e-mail of the order confirmation.
All you have to do is print it out and give it away or send it by e-mail.
Please make sure you entered a valid e-mail address!
You need your gift certificate quickly?
The coupon code we will only ship after payment has been received. If you need your voucher in the short term, choose one of the following payment methods: Paypal or credit card.
Original GANT 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 8
Color: white / red
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer
NOS New Old Stock ~ 1970s - 1980s
Original GANT 1970s vintage gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 11
Color: white / red
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer
NOS New Old Stock ~ 1970s - 1980s
Original GANT Lautaret 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted cotton
Inner hand: finest soft glove leather with light padding
Size: 12
Color: light grey leather with white cotton with black, red and yellow stripes
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
NOS New Old Stock ~ 1970s - 1980s
Original GANT vintage bicycle gloves
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: finest soft glove leather
Inner hand: finest soft glove leather with light padding
Size: 11
Color: light grey leather
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
NOS New Old Stock ~ 1970s - 1990s
Original GANT 1970-90s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 9
Color: white / blue
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Aravis
NOS New Old Stock ~ 1970s - 1990s
Saddlebag, road bike, tire or tube bag, nylon, red
Practical bag for small items such as racing bike tires, spare tubes, snacks, tools, cell phones, wallets or the like.
With a robust metal zipper and an extra velcro outer compartment as well as fastening straps with a quality buckle from Fixlock (ITW-Nexus)
Dimensions: ~ 210 x 120 x 80 mm
Weight: ~ 40 g
Made in Italy
Carrier alu blue fits 27/28 inch tires
NOS New Old Stock ~ late 1990s
Made in Taiwan
Usage
City, Crossrad, Streetracer
Alu Die-Cast
Package comes with
one carrier
including adjustable bracket for mounting on the seat post clamping screw
including strut bracket with rubber cover and stainless screws
including reflector bracket
Material
Color: blue
Attachments on eyelets, seat stay or chain stay
Stainless screw connectors
Technical specification:
Number of struts: 6
Strut attachment to the braze-on base of the frame dropout or seat stay or chain stay
Strut length 340 mm
Weight rack: light ~ 480 g
Dimensions of the rack: ~ 315 x 130 mm
Detto Pietro Mod. 230 Comfort Red
Made in Italy late 1980s
Size 41 (turns out a little smaller)
Genuine Leather
Cleats for toeclip pedals von Pavarin
Historical Racing Bike shoes which fits wonderful to L'Eroica
NOS New Old Stock - New in box
New in box from the late 1980s
Size 41
A very rare piece of history.
Thumb throttle / Thumb gas / Hand throttle
Cable length approx. 47 cm / 18.5 inches
For mounting on the right-hand side of the handlebar.
Fits all handlebars with a diameter of 22.2 mm / 0.87 inches.
Lamp holder for front headlights, white
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: White
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
UD Leather Strap Holding & Carrying Handle for Bicycles, brown
Looks and safety at the same time! Perfectly designed as a grab handle for our little passengers, or as a carrying handle for lifting and moving the bike!
The leather strap fits exactly between the handlebars of the UNI MK and serves as a holding option for riding with children sitting in front of you! Made of leather and available in black or brown!
Features of the leather strap
Material: Leather
Colours: Brown
Grab handle for kids sitting in front of you
Universal size for every bicycle handlebar
Original accessories from Urban Dirvestyle Berlin!
Speedometer Cable for Sachs / VDO Speedometers 620 mm
special speedo cable for Sachs-Huret and VDO speeedos but not for older Huret
length: about 620 mm
Tektro brake pads organic for disc brakes E10.11 green(organic) especially low noise - slightly higher wearThe Tektro brake pad pair is compatible with both cable and hydraulic brakes of the Uni MK series.hydraulic brakes of the Uni MK, as well as for other bikes and e-bikes.Compatible only for Tektro 350e brakeScope of delivery: two brake shoes and one spring clip
Silverfish battery 36V 19.7Ah 709Wh
Powerful e-bike batteries made in Germany in the standardized Silverfish battery case.
Our 36V lithium-ion Silverfish battery impresses with high quality workmanship and durability - made in Germany. It contains high quality LG cells and allows a range of up to 100km*.The battery has an internal BMS module for regulated charging and discharging, a CE/ROHS certificate and comes with a pair of battery keys.
The battery ignition lock has three positions: Unlock, Off, On - due to the design, the battery fits any UNI MK, Bobber, Swing e-bike and can be replaced in a flash.
Features of the battery
Manufacturer: LG cells in Silverfish housing
Voltage: 36V
Capacity: 709Wh = 36V x 19.7Ah
Charging: XLR-3
Dimensions: H 41cm x D 11cm x W 7cm
Weight: ~ 4,5 kg
Compatibility Type / Design: UNI MK Classic/Swing/Bobber
BMS (= Battery Management System)
CE/ROHS certificate
Includes: Battery + Key
Made in Germany
Original replacement battery from Urban Drivestyle Berlin, with UD logo!
* Range is approximate and can vary greatly (rider:in weight, terrain, tire pressure, temperature, etc.).
Disc Brake Adapter Front IS / PM TEKTRO A5 Disc 203 mm
TRP Tektro A5 IS/PM Adapter Front 203mmThe TRP Tektro A5 IS/PM adapter for fork with IS mount and 203mm brake disc in combination with postmount caliper.
Details:
Fork/frame type: IS (International Standard).
Brake caliper type: Postmount
Brake disc diameter: 203mm front
Weight: approx. 60 g
incl. mounting bolts
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Zéfal SPRING
Flexible bottle holder
In thermoplastic resin, the bottle cage provides excellent flexibility. The Spring is light and offers one of the best value on the market.
Characteristic
Weight: 46 g
Material: Thermoplastic resin
Color: Black
Made in Fance
Heavy duty strut / support strut for luggage racks and cargo decks
Material: Chromoly steel
Colour: black, powder coated
Dimensions:
Total length: 42.5 cm
Distance hole centre to hole centre, large: ~ 40.5 cm
Distance hole centre to hole centre, none: ~ 34 cm
The support strut was used on the "load and delivery deck low" from Urban Drivestyle!
Original spare part from Uban Drivestyle Berlin!
Silverfish battery 48V 19.2Ah 920Wh
Powerful e-bike batteries made in Germany in the standardized Silverfish battery case.
Our 48V lithium-ion Silverfish battery impresses with high quality workmanship and durability - made in Germany. It contains high quality LG cells and allows a range of up to 100km*.The battery has an internal BMS module for regulated charging and discharging, a CE/ROHS certificate and comes with a pair of battery keys.
The battery ignition lock has three positions: Unlock, Off, On - due to the design, the battery fits any UNI MK, Bobber, Swing e-bike and can be replaced in a flash.
Features of the battery
Manufacturer: LG cells in Silverfish housing
Voltage: 48V
Capacity: 920Wh = 48V x 19.2Ah
Charging: XLR-3
Dimensions: H 41cm x D 11cm x W 7,5 cm
Weight: ~ 4,5 kg
Compatibility Type / Design: UNI MK Classic/Swing/Bobber
BMS (= Battery Management System)
CE/ROHS certificate
Includes: Battery + Key
Made in Germany
Original replacement battery from Urban Drivestyle Berlin, with UD logo!
Note:From the V5 UNI Bike models (frame number starts with 05....) we only have 48V systems for 250W & Export versions!
* Range is approximate and can vary greatly (rider:in weight, terrain, tire pressure, temperature, etc.).
Order-No: CSR-002
T-Shirt "PG" GoGo, red
with PimpGarageTM imprint on the front and dancing girl on the back
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 !!!
Order-No: CSR-007
Longsleeve-Shirt "PG", ivory
with PimpGarageTM imprint on the right sleeve and big crown logo on the back
high quality cotton
please choose Your size:
S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 34,99 !!!
Original GANT 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted cotton
Inner hand: finest soft glove leather with light padding
Size: 11
Color: light grey leather with white cotton with black, red and yellow stripes
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
NOS New Old Stock ~ 1970s - 1980s