Extension cable for ebike motors
Technical data:
Transmission of data and power between motor and cotroller
Compatible with Bafang hub motors
Waterproof Julet plug 9 PIN
Cable length: ~ 60 cm ( 23,6 inches), 70 cm (27,56 inches) incl. plug
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Longsleeve-Shirt "PG", ivory
with PimpGarageTM imprint on the right sleeve and big crown logo on the back
high quality cotton
please choose Your size:
S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 34,99 !!!
Longsleeve-Shirt "PG", light grey
with PimpGarageTM imprint on the right sleeve and big crown logo on the back
high quality cotton
please choose Your size:
S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 34,99 !!!
Real Leather Frame Bag Swiss Army Replica Black
perfectly manufactured frame bag as used by the swiss army
fits on classic gent frames like the diamond frame
made of thick, black, solid leather with metal buckles and snap fasteners
with side pocket and alloy plate for Your individual engraving
little extra inner pocket, with four leather straps for frame mounting
Dimensions: about 510 x 290 x 100 mm (~20,08 inches x 11,42 x 3,94 inches)
Weight: ~ 1,9 kg (~4,19 pounds)
The bicycle repairmanA manual for cyclists, locksmiths, mechanics, bike dealers and repair shop ownersOld Knowledge 1908From the foreword of 1899: "... I find in the German technical literature still no work dedicated to the repair work occurring in this relatively young and so rapidly upgrown industry." The issue of 1908 contains an additional section "on the repairs of two-wheeled motorcycles".134 pagesAuthor: R.R. from PallerISBN 978-3-935517-78-2
The perfect gift for all hobbyists!
The Classic Cycle voucher worth 30,- €
Redeemable on the entire product range of Classic-Cycle.de
Just put the voucher in the shopping cart and complete the order process. You will receive the coupon code from us after receiving the payment as a PDF attached to the e-mail of the order confirmation.
All you have to do is print it out and give it away or send it by e-mail.
Please make sure you entered a valid e-mail address!
You need your gift certificate quickly?
The coupon code we will only ship after payment has been received. If you need your voucher in the short term, choose one of the following payment methods: Paypal or credit card.
Selle San Marco Mountain-Bag Saddlebag, Racing Bike, tube bag, nylon white
Practical bag for small items such as racing bike tires, spare tubes, tools, or the like.
With a robust zipper and fastening straps with a quality buckle from Fixlock (ITW-Nexus)
Dimensions: ~ 140 x 60 x 50 mm
Weight: ~ 50 g
Made in Italy
XOFO Front geared hub motor 250W for ebike
General: The front motor is mounted in the bicycle fork in the front wheel. Since the motor is at the front and the battery is usually at the rear, the bike has a good weight distribution. This allows the bike to be ridden easily and to be optimally balanced. The switched-on motor pulls the bike forward as soon as you start pedalling. This makes it possible to get going quickly.
Technical details:
Type: Geared Motor with freewheel
Voltage: 36V
Rated Power: 250W
Max Speed: 25 km/h
Torque max: 30 N.m
Maximum Efficiency: ≥ 81
Wheel Size: 24 - 29"
Diameter Motor: ~ 120 mm / 4,72 inches
Installation width: 100 mm / 3,94 inches
Weight: ~ 2,7 kg / ~ 5,95 lbs
Motor connection: 9-Pin
Working Temperature: -20°C - 45°C
Spokes: 12G + 13G
Spoke holes: 36 holes
Brakes: Rimbrake and Discbrake
Cable position: right
Mounting:Quick release
Color: Silver
Hint: The Motor is marked with 26" wheel size. Fits to 24" to 29" wheels as well.
Throttle / twist grip with LED battery indicator, 36 V
Set consisting of:
Throttle
half handle to complete the throttle grip
long handle for the left side of the handlebar
Fits all handlebars with a diameter of 22.2mm / 0.874 inches.
Cable length: approx. 140 cm / 55.11 inches
Bafang wiring harness 1T4
Technical data:
Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Compatible with Bafang hub motors
Waterproof plugs / connectors
Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches
Connections:
1x male 3-PIN Julet connector yellow for throttle / thumb throttle.
1x male 5-PIN Jullet connector green for display
2x female 3-PIN Jullet connector yellow for shift / brake sensor
1x male 8-PIN Jullet connector black for controller
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Lamp holder for front headlights, black
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: Black
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
Tektro Aries Sat left side for E-Bikes cut - off brakeBrake kit for use on e-bikesLever and bracket made of cast aluminium4-finger lever bladeBrake lever EL 350Brake caliper M306HTekro Aries mechanical brake with an adapter for 180 mm or rear for 160 mm disc.power cut - off brakeFunction of a power cut - off brakeThere is a sensor that sends a signal to the control unit when the brake lever is pulled to cut off the motor.Mounting side: leftWeight: 400 g.
Length of Cable: ~ 100 cmScope of delivery: brake lever and brake caliper with brake pads
Greaser mudguard black
original set
pair for front and rear
width: 80 mm, 3,15 inch
Due to the front attachment, the mudguard is specially designed for the Greaser.
Universal switch for handlebar mounting
With this small and space-saving switch, various electrical components and power can be conveniently switched on from the handlebar. The switch controls connected components like an on/off button: pressing the button engages the switch and activates the connection. Pressing the button again interrupts the contact. This makes the switch particularly suitable for longer-term activation.
The switch fits all handlebars with a diameter of 22.2mm / 0.874 inches.
Cable length: approx. 140 cm / 55.11 inches
Thumb throttle for ebike or pedelec
Control the power of your motor from the comfort of your handlebars!
The thumb throttle is simply connected / connected to the wiring harness of your bike thanks to the 3 PIN male Jullet connector.
Details:
Connectors: 3 PIN male Jullet, yellow.
Cable length: ~ 40 cm / 15,75 inches
Mounting: handlebar with 22.2 mm diameter, left and right handlebar side possible
compatible with Bafang motors
Original thumb throttle from Urban Drivestyle Berlin!
Old School Dress Guard / Skirt Protectors, grey, fabric covered Rubber
new, one pair,
grey
28 hooke chainside, 30 hooks other side
for 26 and 28 inch. frames
New and fresh production from Europe
Disc brake adapter from Magura QM 5, IS to PM.
Adapter enables the use of 203 mm brake discs on forks with IS 6" mount.
The adapter is screwed onto the IS mount of the fork and allows the use of a postmount brake caliper.
Front brake disc: 203 mm
Fork mount: IS 6
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
T-Shirt "PG", ivory
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
T-Shirt "PG", ivory
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
Wiring harness 1T4
Technical data:
Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Waterproof plugs / connectors
Cable length: ~ 173 cm / 68,11 inches, incl. connector ~ 180 cm / 70,86 inches
Connections:
1x female 3-PIN Julet connector yellow for throttle / thumb throttle.
1x female 5-PIN Jullet connector green for display
2x male 3-PIN Jullet connector yellow for brake sensor
1x male 8-PIN Jullet connector black for controller
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
UD Trailer Micro foldable
Kit with need for optimisation!
According to UD staff, the necessary optimisations of the trailer can be easily implemented by the experienced do-it-yourselfer.
The pdf file below contains a summary of the individual steps.
Technical info:
Size: 64 cm x 47 cm x 13 cm
Weight: 7 kg
Colour: black
Tyres: 10 inch pneumatic tyres with industrial bearings
When not in use, the trailer can be folded up behind your UD.
Unfortunately, we do not have any further information or assembly instructions.
Genuine article from Urban Drivesytle Berlin.
Battery contacts for e-bike
cable length: ~ 200 mm
A base plate for the battery and the matching self-adhesive seal / padding can be purchased separately.
Original part from Urban Drivestyle Berlin!
Disc brake adapter from Magura QM12, IS to PM.
Adapter enables the use of 160 / 180 mm brake discs on forks and rear triangle with IS 6" mount.
The adapter is screwed onto the IS mount of the fork or frame and allows the use of a postmount brake caliper.
Front brake disc: 180 mm
rear brake disc: 160 mm
Fork mount: IS 6
rear mount: IS 6"
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Adapter for disc brake PM-PM-F180
The front adapter is designed to mount a Post Mount (PM) standard brake caliper to a frame with the same PM standard.
In this version it allows the use of a 180 mm brake disc on the fork.
Post Mount bracket
for 180 mm front brake disc
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Tektro EL 350 cn right side (only for e-bikes)Brake lever for use on e-bikesFor use also with linear pull brakes and Rapidfire shiftersLever and bracket made of cast aluminium4-finger lever bladepower cut - off brakeFunction of a power cut - off brakeThere is a sensor that sends a signal to the control unit when the brake lever is pulled to switch off the motor.Mounting side: rightWeight: 108 g.Scope of delivery: 1 piece
Tektro brake pads organic for disc brakes E10.11 green(organic) especially low noise - slightly higher wearThe Tektro brake pad pair is compatible with both cable and hydraulic brakes of the Uni MK series.hydraulic brakes of the Uni MK, as well as for other bikes and e-bikes.Compatible only for Tektro 350e brakeScope of delivery: two brake shoes and one spring clip
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / 1x Julet male, 1x open end
Water resistance: IP65
Cable length: ~ 30 cm
Plug connection: 1x red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Fender Stays Wave
The stay for your cruiser!
You can mount two pieces on one side (see picture) or use one piece only for one side.
Fit for the articles with the numbers: 220x, 221, 222, 223x, 224, 243, 244, 519, 1223, 385204
Color: Silver anodized
Material: Aluminum
Includes: 1 pair
Without mounting material!
Distance between the axle mount and the mounting hole for the mudguard: ~ 35 cm / 13,78 inch
Distance between mounting holes mudguards: ~ 9.5 cm / 3,74 inch
The bike, its construction, its maintenance and repairsOld Knowledge 1924From the foreword of 1924: "The reader is advised to immerse himself in the construction of this ornate machine by reading this book, and as long as he practices the sport himself and owns a bike, the instructions for care given here to follow faithfully. "158 pagesAuthor: Gustav A. Krumm, Richard BürgerISBN 978-3-935517-85-0
Original GANT Lautaret 1970s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted cotton
Inner hand: finest soft glove leather with light padding
Size: 7
Color: white with blue and red stripes
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Racer Lautaret
NOS New Old Stock ~ 1970s - 1980s
Saddlebag, road bike, tire or tube bag, nylon, black
Practical bag for small items such as racing bike tires, spare tubes, snacks, tools, cell phones, wallets or the like.
With a robust metal zipper and an extra velcro outer compartment as well as fastening straps with a quality buckle from Fixlock (ITW-Nexus)
Dimensions: ~ 210 x 120 x 80 mm
Weight: ~ 40 g
Made in Italy
Double Saddlebag, road bike, tire or tube bag, nylon, red
Practical bag for small items such as racing bike tires, spare tubes, snacks, tools, cell phones, wallets or the like.
With 2 robust metal zippers and an extra velcro outer compartment as well as fastening straps with a quality buckle from Fixlock (ITW-Nexus)
Dimensions: ~ 210 x 120 x 100 mm
Weight: ~ 45 g
Made in Italy
Universal Switch, Horn, Run - Stop, Kill Switch
switch squared for speed pedalec, engine stop, horn or e.g. override - Quad / ATV
with waterresistant rubber frame
Size of switch: ~ 27 x 27 mm
Length of cable: ~ 700 mm
Polt M rear wheel motor 600 W, 36 V for E-bikes
General:
The rear motor or rear wheel motor is, as the name suggests, located in the rear wheel of the bicycle. This location makes the rear of the bike slightly heavier than the front and gives the motor plenty of thrust to help move forward. The rear motor can be used with derailleur gears and thus offers a wide range of gear ratios.
Technical details:
Type: Direct drive
Voltage: 36V
Rated Power: 600W
Speed: 25 km/h
Torque max: 44,41 N.m
Wheel Size: 24 - 29"
Diameter Motor: ~ 240 mm / 9,45 inches
Installation width: 150 mm / 5,90 inches
Weight: ~ 5,7 kg / ~ 12,56 lbs
Motor connection: Cable
Spokes: 12G + 13G
Spoke holes: 36 holes
Brakes: Discbrake mount
Cable position: left
Color: Silver
Housing: Die-cast aluminium
Mounting accessories are included as shown on the pictures.
Hint: The Motor is marked with 26" wheel size. Fits to 24" to 29" wheels as well.
Tool set Urban Drivestyle
Ring and open-end wrench 13 / 15 / 18
Allen key 2 / 4 / 5 / 6
Original from Urban Drivestyle Berlin!
Made in Germany by Format
€7.99*
This website uses cookies to ensure the best experience possible. More information...