Double Saddlebag, road bike, tire or tube bag, nylon, black
Practical bag for small items such as racing bike tires, spare tubes, snacks, tools, cell phones, wallets or the like.
With 2 robust metal zippers and an extra velcro outer compartment as well as fastening straps with a quality buckle from Fixlock (ITW-Nexus)
Dimensions: ~ 210 x 120 x 100 mm
Weight: ~ 45 g
Made in Italy
Carrier alu yellow fits 27/28 inch tires
NOS New Old Stock ~ late 1990s
Made in Taiwan
Usage
City, Crossrad, Streetracer
Alu Die-Cast
Package comes with
one carrier
including adjustable bracket for mounting on the seat post clamping screw
including strut bracket with rubber cover and stainless screws
including reflector bracket
Material
Color: yellow
Attachments on eyelets, seat stay or chain stay
Stainless screw connectors
Technical specification:
Number of struts: 6
Strut attachment to the braze-on base of the frame dropout or seat stay or chain stay
Strut length 340 mm
Weight rack: light ~ 480 g
Dimensions of the rack: ~ 315 x 130 mm
Footrest silver M10 thread for 20x4 E-bikes front / rearSilver
Do you love to race through the neighborhood and want to share this incredible riding experience with others? Then get some footrests now and take your friends on a bike tour! The footrests are also great for riding with kids who sit in front of the rider! In addition, they protect the shift arm and frame, should the bike fall over.
Handmade, solid and simple - The footrests with aluminum alloy are made for's riding with passengers and children and can be mounted quickly and easily, both front and rear. Due to the standardized M10 thread, they also fit other e-bikes and bikes.
Note: The footrests can be quickly and easily swapped between front and rear mount, if you increasingly ride with children and other passengers!
Features of the footrestsMaterial: alloyed aluminumThread: M10Colors: silverDimensions: L 9.8cm (7.8cm without threaded rod) x D 2cm
Grub screw: Stainless steel 2A unhardened, can be tightened firmlyWeight: 170gHandmadeServe as fall over protection for shifting unit and frameAlso fit other e-bikes and bikes with M10 thread1 pair
Put your feet up!
Hope brake adapter N for PM to IS rear wheel 180 mm silver.
Hope adapter for mounting postmount brakes on IS2000 frames. Can be used for rear wheels with 180 mm brake disc.
Please also note the data sheet below when choosing the right adapter!
Post Mount to IS
for 180 mm rear brake disc
incl. mounting bolts
silver
Nutt hydraulic brake right side for e-bikes with power cut - off.
Brake lever for use on e-bikes
Hydraulic brake
With power cut - off
Function of a power cut - off:
There is a sensor that sends a signal to the control unit when the brake lever is pulled to cut off the motor.
Mounting side: right
Weight: ~ 110 g.
Scope of delivery: 1 piece
Shimano Japan brake outer cable black 25 m 6 mm
Made in Japan
Technical data:
Material shift cable: metal, plastic
Length: 25 m
Outer diameter shift cable housing: 6.0 mm
Inner diameter shift cable sleeve: 3,0 mm
EAN: 4524667000570
Shimano part number: Y80A00260
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
Brake cable for rear, pre-assembled
Outer cover:
~ 150 cm long
with end caps
Inner cable:
~ 166 cm long
diameter: ~ 1,5mm
with cylinder nipple ~ 7 x 6 mm
1 piece
The perfect gift for all hobbyists!
The Classic Cycle voucher worth 75,- €
Redeemable on the entire product range of Classic-Cycle.de
Just put the voucher in the shopping cart and complete the order process. You will receive the coupon code from us after receiving the payment as a PDF attached to the e-mail of the order confirmation.
All you have to do is print it out and give it away or send it by e-mail.
Please make sure you entered a valid e-mail address!
You need your gift certificate quickly?
The coupon code we will only ship after payment has been received. If you need your voucher in the short term, choose one of the following payment methods: Paypal or credit card.
Original GANT vintage bicycle gloves
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: finest soft glove leather
Inner hand: finest soft glove leather with light padding
Size: 12
Color: light grey leather
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
NOS New Old Stock ~ 1970s - 1990s
Original GANT 1970-90s vintage bicycle gloves with chrocheted upper hand
The inner hand is made out of finest soft glove leather with light padding.
Upper hand: chrocheted synthetic fiber
Inner hand: finest soft glove leather with light padding
Size: 8
Color: white / blue
Scope of delivery: 1 pair gloves
Genuine leather
Made in France by Gant 41100 Vendome
Aravis
NOS New Old Stock ~ 1970s - 1990s
Saddlebag, road bike, tire or tube bag, nylon, grey
Practical bag for small items such as racing bike tires, spare tubes, snacks, tools, cell phones, wallets or the like.
With a robust metal zipper and an extra velcro outer compartment as well as fastening straps with a quality buckle from Fixlock (ITW-Nexus)
Dimensions: ~ 210 x 120 x 80 mm
Weight: ~ 40 g
Made in Italy
Detto Pietro Mod. 230 Comfort Red
Made in Italy late 1980s
Size 42 (turns out a little smaller)
Genuine Leather
Cleats for toeclip pedals von Pavarin
Historical Racing Bike shoes which fits wonderful to L'Eroica
NOS New Old Stock - New in box
New in box from the late 1980s
Size 42
A very rare piece of history.
Collector's item
Vintage original Sachs-Huret Aris Power Grip twist shifter
for mounting on the left and right handlebars
for 22.2 mm handlebar diameter,
Delivery incl. Shift cables
Sachs Huret ARIS Power Gripp
Shifting comfort: Exact, sporty, fast gear selection with a single turn of the handle
with aisle safety, lock
7-speed right / 3-speed left = 3 x 7
with cables
NOS New Old Stockvery rare
Original new old stock from the 1980s
Vintage Original Specialites TA Drinking Bottle transparent 750 ml
NOS new old stock
volume: 750 ml
Made in France
Material: polyethylene
Weight: 100g
Item may show signs of storage
Throttle / twist grip with LED battery indicator, 48 V
Set consisting of:
Throttle
half handle to complete the throttle grip
long handle for the left side of the handlebar
Fits all handlebars with a diameter of 22.2mm / 0.874 inches.
Cable length: approx. 140 cm / 55.11 inches
Wiring: 4-wire wiring
red: + 5V DC (Hall effect sensor input)
blue: - (GND)
green: OUT (Hall-effect sensor output)
yellow: + (DC in)
Reflective cycling jacket "Fahrfreude" with hood, XXL
The reflective cycling jacket "Fahrfreude" with hood is the perfect companion, not only in the cold season!
With this cycling jacket, you are always clearly visible in road traffic thanks to its high reflectivity. It also protects you from wind and weather.
The "Fahrfreude" cycling jacket with the large Fahrfreude lettering on the back and on the front of the right chest is made entirely of silver reflective material. During the day, the jacket appears to be neutral grey, but at night it shines brightly in road traffic. The high-quality zip and well-cut hood provide the necessary weather protection.
Details:
Size: XXL
Brand: Clique
Material: 100% polyester
Washable: up to 40 °C
Unisex
"Fahrfreude" = Driving pleasure
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / 1x Julet female, 1x open end
Water resistance: IP65
Cable length: ~ 30 cm
Plug connection: 1x red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
48V Charger for Li-Ion Battery with DC Plug
Input: 100 - 240 V ~ 50/60 Hz 2.2 A (max)
Output: 54,6V 2.0 A
Operating and storage temperature: 0 ~ 30° C (~ 32 - 86 ° F)
low noise
complies with all European standards
Note: The charger housing may differ from the illustration.
Disc brake adapter IS PM 160F-140R
Disc brake adapter for conversion from International Standard to Postmount 140 mm on the rear wheel or from International Standard to Postmount 160 mm on the front wheel.
Postmount adapter
for 160 mm front brake disc
for 140 mm rear brake disc
incl. mounting bolts
black
Mechanical Disc Brake Caliper for rear
Nutt Hydraulic Disc Brake - Brake Caliper with Hydraulic Hosewith adapter suitable for front for 180 mm or rear for 160 mm brake discBrake hose length ≈ 175 cmOil brakeincl. brake pads and adapter
Tektro Aries Sat right side rear for e-bikes with breaker contact.
Brake kit for use on e-bikes
Lever and bracket made of a cast aluminum
4-finger lever blade
Brake lever EL 350
Brake caliper M306H
Tekro Aries mechanical brake with an adapter for 180 mm front or rear for 160 mm disc.
power cut - off brake
Function of a power cut - off brake
There is a sensor that sends a signal to the control unit when the brake lever is pulled to cut off the motor.
Mounting side: right
Weight: ~ 448 g.
Length of the Bowden cable: ~ 175 cm
Scope of delivery: brake lever, Bowden cables and brake caliper with brake pads.
Brake pads for disc brakes, green
Carrier plate: steel, green
Dimensions of carrier plate: L: 30 mm, H: 20 mm, total height incl. pin holder: 35 mm
Scope of delivery: 2x brake pads, as illustrated
Order-No: CSR-003
T-Shirt "PG", ivory
with PG crown imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 € !!!
Order-No: CSR-006
T-Shirt "PG", ivory
with PimpGarageTM imprint on the front
high quality cotton
please choose Your size: S M L XL
these high quality shirts come from the insolvency of the PimpGarage TM Custombikes GmbH
the original price was 29,99 !!!
Collectors Item: Dyno Catalog 2001
Fits perfect into your Gentlemens Privacy Club ;-)
Kustom Kruiser Katalog 2001
Original
20 pages
Size: ~ 33 cm x 25 cm
One Hole to hang it as a Calender
With poster in the middle
The perfect gift for all hobbyists!
The Classic Cycle voucher worth 10,- €
Redeemable on the entire product range of Classic-Cycle.de
Just put the voucher in the shopping cart and complete the order process. You will receive the coupon code from us after receiving the payment as a PDF attached to the e-mail of the order confirmation.
All you have to do is print it out and give it away or send it by e-mail.
Please make sure you entered a valid e-mail address!
You need your gift certificate quickly?
The coupon code we will only ship after payment has been received. If you need your voucher in the short term, choose one of the following payment methods: Paypal or credit card.
Saddlebag, road bike, tire or tube bag, nylon, blue
Practical bag for small items such as racing bike tires, spare tubes, snacks, tools, cell phones, wallets or the like.
With a robust metal zipper and an extra velcro outer compartment as well as fastening straps with a quality buckle from Fixlock (ITW-Nexus)
Dimensions: ~ 210 x 120 x 80 mm
Weight: ~ 40 g
Made in Italy
Detto Pietro Mod. 230 Comfort Blue
Made in Italy late 1980s
Size 42 (turns out a little smaller)
Genuine Leather
Cleats for toeclip pedals von Pavarin
Historical Racing Bike shoes which fits wonderful to L'Eroica
NOS New Old Stock - New in box
New in box from the late 1980s
Size 42
A very rare piece of history.
Vintage Original Specialites TA Drinking Bottle white/blue 750 ml
NOS new old stock
volume: 750 ml
Made in France
Material: polyethylene
Weight: 100g
Item may show signs of storage
Urban Drive Style Controller 36V
Rated voltage: 36V
off Voltage: 30 +/- 1V:
Electric current: 15A +/- 1 A
Brakes Level: Low
Ordinary Booster
Nine Speed 20"
Original Item from Urban Drivestyle Berlin
48V Charger for Li-Ion Battery with DC Plug
Input: 200 - 240 V ~ 50/60 Hz 1.8 A (max)
Output: 54.6V 3.0 A
Operating and storage temperature: 0 ~ 30° C (~ 32 - 86 ° F)
low noise
complies with all European standards
Note: The charger housing may differ from the illustration.