Foot Rests, chrome 1
Product information "Foot Rests, chrome 1"
Foot Rests
chrome-plated, 1 pair
- can be also used as passenger foot rests
- to be fixed on the frame (chain stay) or front fork of the bike
- the real lowrider stuff!
- Tube diameter min 24 mm (~0,94 inches) up to max. 30 mm (~1,18 inches)
Login
Cutsomers also bought
Highriser Handlebar
Y654
€24.95*
Highriser Handlebar
for the Polo Bike or similar cult bikes of the 60s and 70s
chrome-plated (ASTM9) steel
Gripwidth: 640 mm (~25,2 inches)
Griphight: 325 mm (~12,79 inches)
Griplength: 120 mm (~4,72 inches)
for 25,4 mm (~1 inch) stems
New
Lowrider Pedals, twisted, chrome 9/16 inch thread, CP, one pair
CH-914
€38.95*
Lowrider Pedals, twisted, Chrome plated 9/16
9/16 inch thread, CP, one pair
Please note: Item is also available with 1/2 inch thread. Please check which size you need.
For your information:
1/2 inch ~ 12.7 mm - for one-piece crank
9/16 inch ~ 14.3 mm - for three-piece crank
articles marked with* are not made for public use according to the german StVZO (ONLY important for buyers from GERMANY!!!)
%
Inner Cable Housing for Brakes 2m
372079
€1.99*
€2.49*
(20.08% saved)
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches
CLSBND80x11x235
€15.95*
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 80 mm (~3,15 inches)
Thick: 1,1 mm (~0,043 inches)
Length: 2350 mm (~ 92,52 inches)
~ 255 g ( ~ 0,56 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.