TOURING TICINO HAMMERED ALLOY FENDER SET
700X25C~38C
Lightweight handcrafted alloy with adjustable alloy stays.
High-polished with clear anodized finish.
Includes various mounting brackets to allow for easy installation on most 700c wheel bicycles.
width: 46 mm (~1,81 inches)
height: 25 mm (~0,98 inches)
rear length: ~ 115 cm (~45,27 inches)
front length: ~ 68 cm (~26,77 inches)
Inside diameter: approx. 710 mm (~27,6 inches)
Outside diameter: approx. 740 mm (~29,13 inches)
Old School Dress Guard / Skirt Protectors, red-black marbled fabric covered Rubber
new, one pair,
red-black marbled
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Old School Dress Guard / Skirt Protectors, blue white fabric covered Rubber
new, one pair,
blue white
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Outer Cable Housing Glittering Blue Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Universal cable adjuster
M6
length: 30 mm (~1,18 inches)
with knurled nut
fits to inner cable till 2,5 mm (~0,1 inch) and out cable till 6 mm (~0,24 inches) diameter
Outer Cable Housing Checkered Flag Black / Yellow 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Old School Dress Guard / Skirt Protectors, black-white, fabric covered Rubber
new, one pair,
black and white
30 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Outer Cable Housing Glitter Green Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
In traffic the round mirror with its diameter of 95 mm (~3,74 inches) provides an excellent view. The high postitioning of the rearview mirror offers excellent visibility in road traffic.
for left side assembly
for mounting on the inner section of the handlebars
the ball joint enables easy adjustment
circular mirror glass for best possible view
Mirror ⌀ 95 mm (~3,74 inches)
Footrest black M10 thread for 20x4 E-bikes front / rearBlack
Do you love to race through the neighborhood and want to share this incredible riding experience with others? Then get some footrests now and take your friends on a bike tour! The footrests are also great for riding with kids who sit in front of the rider! In addition, they protect the shift arm and frame, should the bike fall over.
Handmade, solid and simple - The footrests with aluminum alloy are made for's riding with passengers and children and can be mounted quickly and easily, both front and rear. Due to the standardized M10 thread, they also fit other e-bikes and bikes.
Note: The footrests can be quickly and easily swapped between front and rear mount, if you increasingly ride with children and other passengers!
Features of the footrestsMaterial: alloyed aluminumThread: M10Colors: blackDimensions: L 9.8cm (7.8cm without threaded rod) x D 2cmWeight: 170g
Grub screw: Stainless steel 2A unhardened, can be tightened firmlyHandmadeServe as fall over protection for shifting unit and frameAlso fit other e-bikes and bikes with M10 thread1 pair
Put your feet up!
Inner Cable Housing for Brakes made of stainles steel 2 m (~2,19 yards)
"Speed Slick" for smoother and faster braking.
Diameter: 1.5mm x 2.00mm (~0,06 x 78,74 inches)
with pear nipples
Package included: 1 piece
for Shimano
Original Cruiser Tank Dummy (2 Shells), chrome plated. 2nd choice
chrome-plated, with little louvres, without stickers
tank fits on Schwinn Black Phantom, Cruiser Classic and Classic Cruiser Pacific Flyer frames
dimensions: about 435 x 140 x 85 mm (~17,12 x 5,51 x 3,35 inches)
Weight: ~ 670 gr (~1,48 pounds)
Both sides can be screwed together with 3 screws and clamp the frame
2nd choice: the rear screw hole is misplaced and a new hole must be drilled.
Outer Cable Housing Black Checker Shaded 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Alu Front light holder / clip Outsider
Of course, this high-quality lamp holder, from the Outsider series, can also be used for other frames and lamp models.
Diameter inside: ~ 3.4 cm (~1,34 inches)
Diameter outside: ~ 4,15 cm (~1,63 inches)
Length: ~10,3 cm (~4,05 inches)
Material: aluminum
Color: black
with Allen screw
1 piece included in delivery
Old School Dress Guard / Skirt Protectors, red-white, fabric covered Rubber
new, one pair,
red and white
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Cable protection hose with velcro
0,99 € per 10 cm (~3,94 inches)
how to order:100 cm (~39,37 inches) needed = 10 x 10 cm (~3,94 inches) = 10 x 0,99 €, when 150 cm needed (~59,05 inches) = 15 x 10 cm (~3,94 inches) = 15 x 0,99 €
This service is only available in Germany!
GPS Tracker for E-Bikes from IT'S MY BIKE
Smart technologies for your bike.
E-bikes are expensive and coveted and thus, like all other high-quality bicycles, a popular object of bike thieves.
With the IT'S MY BIKE tracking system for e-bikes, this problem solves itself.
Once installed, you can use an app to locate your e-bike whenever and wherever you want.
The GPS tracker from IT'S MY BIKE can be installed invisibly in the bike and connects your vehicle to the Internet.
The position data is recorded via GPS, and the data is transmitted via the new mobile technology for the Internet of Things NB-IoT.
This so-called LPWAN technology (Low-Power Wide Area Network) offers many advantages. These include, among other things, a higher range and
building penetration than alternative mobile radio standards such as GSM, 3G or LTE while consuming less energy.
As a result, the service life of the built-in battery is considerably longer.
With the purchase of IT'S MY BIKE Tracker you get 3 years of connectivity in Germany.
A total of four services are currently available in the IT'S MY BIKE app.
The theft protection (eProtect) provides support in the event of theft directly via the app when reporting it to the police. The e-bike owner can view the location of his bike on a map. In addition, the IT'S MY BIKE team coordinates between the police and the stolen. The recovery rate is currently 80 percent.
In addition to the theft protection, the service also includes an optional digital emergency assistant. This premium service is offered by IT'S MY BIKE together with the companion app WayGuard from Axa. The emergency assistant (eCall) triggers an alarm in the event of a fall or accident. The WayGuard control center is available around the clock and alerts the nearest emergency services in the event of an emergency. The WayGuard service is available in Germany and can be optionally added for a fee and can be canceled on a monthly basis.
Users also have the option of taking out suitable insurance packages (eSurance) directly in the app. The specially developed e-bike insurance with GPS protection from partner ALTEOS covers numerous risks, including theft, vandalism, battery wear and accident damage.
Finally, ride statistics (eRide) make it possible to call up the ride distance and duration as well as the average speed. E-biker riders can also use average values to calculate how much CO2 they save compared to a car.
This service is only available in Germany!
Mounting instructions:
To prevent the GPS signal from being shielded by the frame, the tracker should be installed with the sticker facing outwards. The GPS antenna is located under the sticker. Ideally, the tracker should be mounted under a plastic cover. Housings made of aluminium, steel and metal alloys can interfere with the connection to the GPS signal.
Activation:
The tracker is activated by the customer. If the tracker is connected to the continuous current for at least 30 minutes, please scan the QR code of the product in the app.The tracker reacts and should register in the system.
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 100 cm / 39,37 inches
Plug connection: red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
DC converter / voltage transformer with HIGO / Julet connections
Input: 7 - 60 VDC
Connector: 1x 2-pin HIGO / Julet female, red
Output: 12V / 1000 mA
Connector: 2x 2-pin HIGO / Julet male, red
Total length incl. plug: ~ 30 cm
Converter size: 43 x 21 x 10 mm
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Outer Cable Housing Light Yellow 2,50 m x 5 mm
for shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
H4 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H4 socket allows you to use car or motorbike headlight bulbs like this H4 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H4 LED
Standard H4 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
ABUS / Messenger-Bag / Bag/ ST 7600 / 13 l
Note book Bag
First Top Quality
To use for: Premium urban messenger bag for office and commuter
Specs:
13 L (~27,3 pints) capacity
Waterressitant and heavy duty Materials 1260 D Oxford Nylon and Koskin 6100
Keps the shape Padded handles and shoulder strap pad for comfortable carrying and riding
Reflecting Piping
Waterproof and partially lockable zippers Comfortable magnetic fasteners for the bag cover
Trolley strap to attach the bag to a trolley telescope handle
Padded lock or lap-top compartment for easy and safe transport of a lock or Lap-top
Rain hood included with extra strong reflective strip for better visibility in poor weather conditions and night
The bag is not meant for mounting on a bike, but is worn over the shoulder and secured with the hip belt
Capacity: 13 Liter (~27,3 pints)
Dimensions: 48 x 39 x 11 cm (~18,9 x 15,35 x 4,33 inches)
Outer Cable Housing Light Green 2,50 m x 5 mm
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 50 cm / 19,68 inches
Plug connection: red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Outer Cable Housing Black / Silver Diamondshape Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Controller box, electronics box with seal for E-Bike Uni Moke and Swing
The controller box is made of robust plastic. In addition to attaching the controller to your e-bike, it also protects it.
Dimensions:
Outer dimension: ~ 21cm x 10.7cm x 3.4cm
Inner dimensions: ~ 15.5 cm x 8.2 cm x 2.5 cm
The box can be fitted to the frame of the Urban Dirvestyle Uni Moke and Swing bikes. It is screwed to the frame from below with the help of 4 screws. The cables are pulled upwards into the frame.
The scope of delivery includes the controller box and the matching self-adhesive seal.
Outer Cable Housing Pink 2,50 m x 5 mm
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Outer Cable Housing Black Confetti Gloss 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Outer Cable Housing Silver / Rainbow Shining 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
For mounting on the handlebar. We recommend left side below.
The throttle can be installed on the Greaser or the Outsider.It is connected to the controller (control unit) via the existing cables. The drive assistance from the engine can be controlled manually by the thumb throttle.
Fitts Greaser and Outsider!
Mirror Mount CNC 22mm/ M10 right-hand thread - black
Quality mirror clip for hanlde bars form VICMA
Diameter inside: ~ 22 mm
Tread: M10
Material: aluminum
Color: black
with 2 Allen screws
1 piece included in delivery
PAS KT-V12L Pedal Assist Sensor
Installation side: left
Cable length: 130 mm
Connector: 3-pin Julet connector, waterproof
Fits e.g. e-bikes from Urban Drivestyle!
Outer Cable Housing Rainbow 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
H4 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H4 socket allows you to use car or motorbike headlight bulbs like this H4 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H4 LED
Standard H4 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
Leather loop with metal buckle
for handlebars, seat stays or your waist belt
Vintage Look
Bend leather with 3 Rivets und buckle
Dimensions:
Max,. length: 9 cm (~3,54 inches)
Max. width: 3,5 cm (~1,38 inches)
1 Piece
Retro Universal / Newspaper Holder chrome plated
Beautiful chrome plated vintage italian style newspaper holder that can also be used as an universal holdermounting for example on the handlebar through the handlebar clamp bolt.
size: about 130 x 80 x 30 mm (~5,12 x 3,15 x 1,18 inches)
SUPER B TB-3208 chain cleaner
with nylon brushes
no need for taking down the chain
for multiple speed
comfortable plastic handle
with magnet at the bottom to remove metal particles
filling hole for applying detergent and chain lube separately and percisely
BAFANG Urban Drive Style Controller 48V
Rated voltage: 48V
off Voltage: 41,5 +/- 1V:
Electric current: 18A +/- 1 A
Original Item from Urban Drivestyle Berlin!
The controller was installed on the UNI Boost with a setting of 20x4 and a maximum speed of 20 km/h.
€69.95*
This website uses cookies to ensure the best experience possible. More information...