Extension cable for ebike motors
Technical data:
Transmission of data and power between motor and cotroller
Compatible with Bafang hub motors
Waterproof Julet plug 9 PIN
Cable length: ~ 60 cm ( 23,6 inches), 70 cm (27,56 inches) incl. plug
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
XOFO Front geared hub motor 250W for ebike
General: The front motor is mounted in the bicycle fork in the front wheel. Since the motor is at the front and the battery is usually at the rear, the bike has a good weight distribution. This allows the bike to be ridden easily and to be optimally balanced. The switched-on motor pulls the bike forward as soon as you start pedalling. This makes it possible to get going quickly.
Technical details:
Type: Geared Motor with freewheel
Voltage: 36V
Rated Power: 250W
Max Speed: 25 km/h
Torque max: 30 N.m
Maximum Efficiency: ≥ 81
Wheel Size: 24 - 29"
Diameter Motor: ~ 120 mm / 4,72 inches
Installation width: 100 mm / 3,94 inches
Weight: ~ 2,7 kg / ~ 5,95 lbs
Motor connection: 9-Pin
Working Temperature: -20°C - 45°C
Spokes: 12G + 13G
Spoke holes: 36 holes
Brakes: Rimbrake and Discbrake
Cable position: right
Mounting:Quick release
Color: Silver
Hint: The Motor is marked with 26" wheel size. Fits to 24" to 29" wheels as well.
Throttle / twist grip with LED battery indicator, 36 V
Set consisting of:
Throttle
half handle to complete the throttle grip
long handle for the left side of the handlebar
Fits all handlebars with a diameter of 22.2mm / 0.874 inches.
Cable length: approx. 140 cm / 55.11 inches
Bafang wiring harness 1T4
Technical data:
Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Compatible with Bafang hub motors
Waterproof plugs / connectors
Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches
Connections:
1x male 3-PIN Julet connector yellow for throttle / thumb throttle.
1x male 5-PIN Jullet connector green for display
2x female 3-PIN Jullet connector yellow for shift / brake sensor
1x male 8-PIN Jullet connector black for controller
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Lamp holder for front headlights, black
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: Black
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / 1x Julet male, 1x open end
Water resistance: IP65
Cable length: ~ 30 cm
Plug connection: 1x red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Greaser mudguard black
original set
pair for front and rear
width: 80 mm, 3,15 inch
Due to the front attachment, the mudguard is specially designed for the Greaser.
Universal switch for handlebar mounting
With this small and space-saving switch, various electrical components and power can be conveniently switched on from the handlebar. The switch controls connected components like an on/off button: pressing the button engages the switch and activates the connection. Pressing the button again interrupts the contact. This makes the switch particularly suitable for longer-term activation.
The switch fits all handlebars with a diameter of 22.2mm / 0.874 inches.
Cable length: approx. 140 cm / 55.11 inches
Bafang BBS-HD 1000W Mid Drive 48V
For 100 mm BSA Botton Bracket Shell
M-SERIES
Powerful, quiet and perfectly integrated - these are the attributes of the Bafang M-Series. Due to the compact design, the mid-motors of the M-Series can be installed inconspicuously on many types of eBike.
A key characteristic is their extremely harmonious handling.
List of Delievery:
MOTOR: BBS HD MM G320.1000
Chain wheel : 44 T
EB-BUS: 1T4
Speed Sensor: SR SD02. 01
Throttle: TR 1501
OEM Packing
Thumb throttle for ebike or pedelec
Control the power of your motor from the comfort of your handlebars!
The thumb throttle is simply connected / connected to the wiring harness of your bike thanks to the 3 PIN male Jullet connector.
Details:
Connectors: 3 PIN male Jullet, yellow.
Cable length: ~ 40 cm / 15,75 inches
Mounting: handlebar with 22.2 mm diameter, left and right handlebar side possible
compatible with Bafang motors
Original thumb throttle from Urban Drivestyle Berlin!
Old School Dress Guard / Skirt Protectors, grey, fabric covered Rubber
new, one pair,
grey
28 hooke chainside, 30 hooks other side
for 26 and 28 inch. frames
New and fresh production from Europe
Wiring harness 1T4
Technical data:
Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Waterproof plugs / connectors
Cable length: ~ 173 cm / 68,11 inches, incl. connector ~ 180 cm / 70,86 inches
Connections:
1x female 3-PIN Julet connector yellow for throttle / thumb throttle.
1x female 5-PIN Jullet connector green for display
2x male 3-PIN Jullet connector yellow for brake sensor
1x male 8-PIN Jullet connector black for controller
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
UD Trailer Micro foldable
Kit with need for optimisation!
According to UD staff, the necessary optimisations of the trailer can be easily implemented by the experienced do-it-yourselfer.
The pdf file below contains a summary of the individual steps.
Technical info:
Size: 64 cm x 47 cm x 13 cm
Weight: 7 kg
Colour: black
Tyres: 10 inch pneumatic tyres with industrial bearings
When not in use, the trailer can be folded up behind your UD.
Unfortunately, we do not have any further information or assembly instructions.
Genuine article from Urban Drivesytle Berlin.
Battery contacts for e-bike
cable length: ~ 200 mm
A base plate for the battery and the matching self-adhesive seal / padding can be purchased separately.
Original part from Urban Drivestyle Berlin!
Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Fender Stays Wave
The stay for your cruiser!
You can mount two pieces on one side (see picture) or use one piece only for one side.
Fit for the articles with the numbers: 220x, 221, 222, 223x, 224, 243, 244, 519, 1223, 385204
Color: Silver anodized
Material: Aluminum
Includes: 1 pair
Without mounting material!
Distance between the axle mount and the mounting hole for the mudguard: ~ 35 cm / 13,78 inch
Distance between mounting holes mudguards: ~ 9.5 cm / 3,74 inch
Universal Switch, Horn, Run - Stop, Kill Switch
switch squared for speed pedalec, engine stop, horn or e.g. override - Quad / ATV
with waterresistant rubber frame
Size of switch: ~ 27 x 27 mm
Length of cable: ~ 700 mm
Polt M rear wheel motor 600 W, 36 V for E-bikes
General:
The rear motor or rear wheel motor is, as the name suggests, located in the rear wheel of the bicycle. This location makes the rear of the bike slightly heavier than the front and gives the motor plenty of thrust to help move forward. The rear motor can be used with derailleur gears and thus offers a wide range of gear ratios.
Technical details:
Type: Direct drive
Voltage: 36V
Rated Power: 600W
Speed: 25 km/h
Torque max: 44,41 N.m
Wheel Size: 24 - 29"
Diameter Motor: ~ 240 mm / 9,45 inches
Installation width: 150 mm / 5,90 inches
Weight: ~ 5,7 kg / ~ 12,56 lbs
Motor connection: Cable
Spokes: 12G + 13G
Spoke holes: 36 holes
Brakes: Discbrake mount
Cable position: left
Color: Silver
Housing: Die-cast aluminium
Mounting accessories are included as shown on the pictures.
Hint: The Motor is marked with 26" wheel size. Fits to 24" to 29" wheels as well.
Tool set Urban Drivestyle
Ring and open-end wrench 13 / 15 / 18
Allen key 2 / 4 / 5 / 6
Original from Urban Drivestyle Berlin!
Made in Germany by Format
Bicycle garage rain cover Urban Drivestyle Berlin
with storage bagFits 204 bikesColor: black with UD print - Interior color: silver coatingDouble seams
Elasticated front and back,
Click closure
Material:
190T polyester fabric with PVC coating.
Silverfish battery 48V 19.2Ah 920Wh
Powerful e-bike batteries made in Germany in the standardized Silverfish battery case.
Our 48V lithium-ion Silverfish battery impresses with high quality workmanship and durability - made in Germany. It contains high quality LG cells and allows a range of up to 100km*.The battery has an internal BMS module for regulated charging and discharging, a CE/ROHS certificate and comes with a pair of battery keys.
The battery ignition lock has three positions: Unlock, Off, On - due to the design, the battery fits any UNI MK, Bobber, Swing e-bike and can be replaced in a flash.
Features of the battery
Manufacturer: LG cells in Silverfish housing
Voltage: 48V
Capacity: 920Wh = 48V x 19.2Ah
Charging: XLR-3
Dimensions: H 41cm x D 11cm x W 7,5 cm
Weight: ~ 4,5 kg
Compatibility Type / Design: UNI MK Classic/Swing/Bobber
BMS (= Battery Management System)
CE/ROHS certificate
Includes: Battery + Key
Made in Germany
Original replacement battery from Urban Drivestyle Berlin, with UD logo!
Note:From the V5 UNI Bike models (frame number starts with 05....) we only have 48V systems for 250W & Export versions!
* Range is approximate and can vary greatly (rider:in weight, terrain, tire pressure, temperature, etc.).
VOXOM bike lock folding lock Clipster, Sold Secure Silver Standard
The new VOXOM folding lock Clipster is next to the VOXOM folding lock Compact, with its 1,000 g / 2,2 lbs the lightest folding lock with Sold Secure Silver Standard on the market.
It consists of several steel links with protected rivets and withstands an attack with various tools for at least three minutes.
The metal parts are rustproof and have a UV-protected cover, so that even strong weather conditions cannot impair the security of the lock.
To avoid scratches in the frame, the links are coated with plastic.
The VOXOM folding lock Clipster has a circumference of 85 cm / 33,46 inch and can be smoothly folded to a compact size.
Hardened steel links- Increase security to protect your bike
Weather-proof- Metal components are rust free with UV protected cover
Ultra protected rivets- Rivets are designed with VSR technology which protects against sawing and cutting
Quiet and smooth movement of the joints through friction mechanism
Easy to carry- Clipster for the Hipster
Fast and easy to use- Easy and convenient to operate
Super compact design ensures lock is easy to carry and not too heavy
Automovtive standard keys (3 keys included)
Color Black
Weight ~ 1000 g / ~ 2,2 lbs
About Sold Secure Standard:
Sold Secure is dedicated to reducing the risk of crime by the assessment of security products. Sold Secure Approval is classified into 3 main categories:Bronze, Silver & Gold. The categories reflect the amount of time per test and the tools that are used and themselves vary depending on what test specification is being used. The higher the grading (Bronze is the lowest) the higher the security provided by the product.
Extension cable for Ebike
Technical data:
Connector: 3-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 5,5 cm / 2,16 inches
Plug connection: yellow
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Greaser Tank cover set orange
Set for right and left side
Dyed plastic
Total length: ~ 71,5 cm (~28,15 inches)
Maximum height: ~ 16,5 cm (~6,50 inches)
Urban Drive Style Controller 48V
Rated voltage: 48V
off Voltage: 41 +/- 1V:
Electric current: 18A +/- 1 A
Brakes Level: Low
Ordinary Booster
Nine Speed 20"
Original Item from Urban Drivestyle Berlin
Brake sensor magnetic for mounting on the handlebar, universal use.
Function: The brake sensor detects the movement of the magnet when the brake is applied and ensures that the motor action is interrupted.
Connection: The brake sensor has a waterproof higo / julett connection, yellow 3 -pin male
Cable length: ~ 280 mm
Mounting side: left
Scope of delivery: as shown
Original accessories from Urban Drivestyle Berlin!
Brake sensor magnetic for mounting on the handlebar, universal use.
Function: The brake sensor detects the movement of the magnet when the brake is applied and ensures that the motor action is interrupted.
Connection: The brake sensor has a waterproof higo / julett connection, yellow 3 -pin male
Cable length: ~ 280 mm
Mounting side: right
Scope of delivery: as shown
Original accessories from Urban Drivestyle Berlin!
48V Charger for Li-Ion Battery with DC Plug
Input: 110 - 240 V ~ 50/60 Hz 2.0 A
Output: 54,6V 2.0 A
Operating and storage temperature: 0 ~ 30° C (~ 32 - 86 ° F)
low noise
complies with all European standards
Note: The charger housing may differ from the illustration.
Urban Drivestyle handlebar cover / handlebar protection cover for bikes.
Protection for the electronics and mechanics at the cockpit of your bike!
Whether your bike is outdoors for a long time or is transported, with the handlebar cover you protect the electronics and the mechanics at the cockpit of your bike from the weather.
The cover is easily and quickly slipped over the handlebars and attached with the help of Velcro.
In case of moisture inside the cover, open it and let it dry as well as the handlebar.
Notice:
The handlebar protection cover is suitable for use on a handlebar with a width of 60 - 80 cm. At the ends the cover is about 14 cm wide, in the middle about 19 cm wide.
Features:
Protection for the handlebar fittings and electronics of the bike cockpit during transport.
Waterproof material
Quick and easy installation with velcro tape
Features:
Material: nylon with PU coating
Color: black
Closure: Industrial Velcro
Dimensions:~ 85 x 14 cm (LxW)
Weight: ~ 45 g
With logo of Urban Drivestyle!
Original accessories from Urban Drivestyle Berlin!
Brake cable for front, pre-assembled
Outer cover:
~ 80 cm long
with end caps
Inner cable:
~ 96 cm long
diameter: ~ 1,5mm
with cylinder nipple ~ 7 x 6 mm
1 piece
Charging socket XLR D 3-pole, female with sealing cap / sealing housing
Info about the XLR D 3-pole female charging connector:
Traditional chassis connector with large solder pads for easy soldering.
3-pole female chassis connector, D-shape
Solder terminals
Black plastic housing
Gold plated contacts
Info about the Neurik SCDX sealing cap / sealing housing:
With the SCDX sealing cap, D-shape chassis connectors are sealed against water, dust and dirt according to IP42 when unmated.
IP42 protection against dust and splash water
Suitable for all D-shape flush-type connectors
Snap lock
Labelling area
The dimensions of the sealing cap can be found in the data sheet below.
Scope of delivery:
1x XLR D receptacle
1x sealing cap
Greaser fuel tank cover Set ivory
Set for right and left side
Dyed plastic
Total length: ~ 71,5 cm (~28,15 inches)
Maximum height: ~ 16,5 cm (~6,50 inches)
Footrest silver M10 thread for 20x4 E-bikes front / rearSilver
Do you love to race through the neighborhood and want to share this incredible riding experience with others? Then get some footrests now and take your friends on a bike tour! The footrests are also great for riding with kids who sit in front of the rider! In addition, they protect the shift arm and frame, should the bike fall over.
Handmade, solid and simple - The footrests with aluminum alloy are made for's riding with passengers and children and can be mounted quickly and easily, both front and rear. Due to the standardized M10 thread, they also fit other e-bikes and bikes.
Note: The footrests can be quickly and easily swapped between front and rear mount, if you increasingly ride with children and other passengers!
Features of the footrestsMaterial: alloyed aluminumThread: M10Colors: silverDimensions: L 9.8cm (7.8cm without threaded rod) x D 2cm
Grub screw: Stainless steel 2A unhardened, can be tightened firmlyWeight: 170gHandmadeServe as fall over protection for shifting unit and frameAlso fit other e-bikes and bikes with M10 thread1 pair
Put your feet up!
Shimano Japan brake outer cable black 25 m 6 mm
Made in Japan
Technical data:
Material shift cable: metal, plastic
Length: 25 m
Outer diameter shift cable housing: 6.0 mm
Inner diameter shift cable sleeve: 3,0 mm
EAN: 4524667000570
Shimano part number: Y80A00260
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
Brake cable for rear, pre-assembled
Outer cover:
~ 150 cm long
with end caps
Inner cable:
~ 166 cm long
diameter: ~ 1,5mm
with cylinder nipple ~ 7 x 6 mm
1 piece
Collector's item
Vintage original Sachs-Huret Aris Power Grip twist shifter
for mounting on the left and right handlebars
for 22.2 mm handlebar diameter,
Delivery incl. Shift cables
Sachs Huret ARIS Power Gripp
Shifting comfort: Exact, sporty, fast gear selection with a single turn of the handle
with aisle safety, lock
7-speed right / 3-speed left = 3 x 7
with cables
NOS New Old Stockvery rare
Original new old stock from the 1980s
Vintage Original Specialites TA Drinking Bottle transparent 750 ml
NOS new old stock
volume: 750 ml
Made in France
Material: polyethylene
Weight: 100g
Item may show signs of storage
€9.95*
This website uses cookies to ensure the best experience possible. More information...