204 Front Wheel 20 x 4 inch Fat Bike 80 mm black with silver hub and disk mount, 2nd choice
20 x 4 inch Fat Bike front wheel
black matte anodized alu rim,
36 Spokes 2,6 mm
strudy, strong and sexy
alumnium silver Hub with disc brake mount 44 mm 6 holes
over locknut dimension: 135 mm
axle 9,5 mm diameter with bolt on
rim width: 80 mm
weight: ~ 1550 g
Hint:
According to the picture, the spoke holes in the rim base are a little unsightly - unheard of with obligatory use of a rim tape!
Surface shows oily traces due to production.
Tire 26 x 3.0, white wall
75-559
Semi Slick Tire
thick and strong!
the ultimate nostalgia custom cruiser hot rod tire!
40 PSI
about 75 mm wide on a 56 mm rim
about 80 mm wide on a 64 mm rim
about 87 mm wide on a 80 mm rim
Overall diameter, depending on rim width and air pressure about: 705 mm + / - 20 mm
Weight: 2,1 kg
This tire fits on all 26" Classic Cycle rims up to 82 mm width!
But please check frame/fork for clearance!
The pictures shows the new assembled on a 64 mm wide black matte rim.
If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast.
Tire 24 x 3.0 pure black75-507
Semi Slick
Thick and strong tire for up to 20- 45 PSI pressure
Mounted approx. 75 mm wide
Total diameter depending on rim width and air pressure approx: 65.3 + / - 2 cm
Weight: approx. 1.6 kg
This tire fits on all CLASSIC CYCLE 24" rims up to approx. 82 mm width!
Do not inflate the tire above 1.5 bar for 82 mm wide rims. There is a risk that the flank wire tears (- applies to all tires on extra wide rims).
However, please note clearance in frame and / or fork!
1 piece
Red Tire 24 x 3.0 white wall
76-507
semi slick
big and strong tire
for up to 40 PSI pressure
inflated about 75 mm wide
Overall diameter, depending on rim width and air pressure about: 63 cm + / - 2 cm Weight: 1.3 kg
This tire fits on all 24" Classic Cycle rims up to 82 mm width! But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.
Kenda Kassette 20 x 2.25
58-406
Nice tyre with grey sidewall.
Suitable tyre for rims up to approx. 67 mm / 2,64 inches wide.
Weight: ~ 700 g / 1,54 lbs
204 Front Wheel 20 inch Fat Bike 80 mm glossy black with disk mount
20 inch Fat Bike front wheel
glossy black matte anodized alu rim,
36 Spokes 2,6 mm stainless
strudy, strong and sexy
disc brake mount 44 mm 6 holes
over locknut dimension: 135 mm
axle 9,5 mm diameter with bolt on
rim width: 80 mm
weight: ~ 1550 g
Aluminium Alloy Rim 24 inch., 57 mm (~2,24 inches) wide
ETRTO: 507
single wall 57
the ultimate ultra fat custom chopper wheel
wide:
57 mm (~2,24 inches)
Inner size:
50 mm (~1,97 inches)
holes:
36
colour:
high polished
Rim diameter for calculating the spoke length:
486 mm (~19,13 inches)
Weight:
720 g (~1,59 pounds)
Aluminium Alloy Rim 20 inch., 82 mm (~3,23 inches) wide
ETRTO: 406
double wall 82
Wide:
82 mm (~3,23 inches)
inner size:
75 mm (~2,95 inches)
Holes:
36
colour:
high polished
Rim diameter for calculating the spoke length:
383 mm (~15,08 inches)
Weight:
1000 g (~2,20 pounds)
Aluminium Alloy Rim 28 inch., 67 mm (~2,64 inches) wide, DOUBLEWALL
ETRTO: 622
Doublewall
wide:
67 mm (~2,64 inches)
Inner size:
60 mm (~2,36 inches)
holes:
36
colour:
raw
Rim diameter for calculating the spoke length:
599 mm (~23,58 inches)
Weight:
1372 g (~3,02 pounds)
Aluminium Alloy Rim 27,5 inch., 67 mm wide, 32 holes double wall
ETRTO: 584 mm
double wall 67
wide:
67 mm (~2,64 inches)
Inner size:
60 mm (~2,36 inches)
holes:
32
colour:
black matte
Rim diameter for calculating the spoke length:
599 mm (~23,58 inches)
Weight:
~1372 g (~3,02 pounds)
140 Holes 24 inch. Rim, chrome-plated
24 x 2.125
chrome-plated steel
overall width: 32 mm (~1,26 inches)
inner width: 24 mm (~0,94 inches)
140 holes
All 24" Classic Cycle tires fit on this rim! But please check frame/fork for clearance!
Rear Wheel OPC 20 inch black silver with disk mount and free wheel
20 inch Bike rear wheel (406)
Alu glossy black and lathed silver rim,
new I - Cross Design
strudy, strong and sexy
disc brake mount 44 mm
over locknut dimension: ~ 115 mm (~ 4,52 inch)
5 double spokes design
axle ~ 9,2 mm ( ~ 0,36 inch) diameter with bolt on, length: ~ 165 mm ( 6,89 inch)
rim width: outer: 34 mm (1,38 inch). Innerwidth: 25 mm (0,984 inch)
weight: ~ 1670 g (~3,68 lbs)
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
72
colour:
black powder coated
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
DT-Competition Spokes 2.0 / 1.8 x 308 silver
Double-Butted
Swiss Racing Spokes
size: 2.0 /1.8 x 308 mm
Stainless Steel 18/10
1 piece without nipple
Swiss Made
204 MXUS Front wheel complete with tyre and tube 20 x 4 - 80 mm wide
20 inch Fat Bike front wheel
black matte anodized alu rim,
36 Spokes 2,6 mm black
Hub: Quando
disc brake mount 44 mm 6 holes
over locknut dimension: 135 mm
rim width: 80 mm
ready assembled
with rim tape and tube
with Innova allround tire 20 x 4
weight: ~ 3200 g
This Items was produced for Urban Drive Style UDX Model
Aluminium Alloy Rim 24 inch., 132 mm wide
ETRTO: 507
single wall 132 extreme fat
the ultimate ultra fat custom chopper wheel
Wide:
132 mm (~5,20 inches)
inner size:
125 mm (~4,92 inches)
Holes:
32
colour:
black matte
Rim diameter for calculating the spoke length:
486 mm (~19,13 inches)
Weight:
1395 kg (~3,08 pounds)
Offset / half distance:
~ 32 mm (~1,259 inches)
3rd picture shows the rim with our 24 x 4 1/4 Street Hog III Monster Tire (Item 9007).
140 Holes 26 inch. Rim, chrome-plated
26 x 2.125chrome-plated steel overall width: 32 mm (~1,26 inches)inner width: 24 mm (~0,94 inches)140 holesAll 26" Classic Cycle tires fit on this rim! But please check frame/fork for clearance!
REVOLOOP.mtb ultra
The REVOLOOP.mtb ultra is the challenge to steep climbs and was trimmed by us for lightweight construction, which is reflected in a product weight of only 45 grams at 29 inches. Due to its low weight, it saves about 100 grams per wheel, which makes starting and climbing less strenuous. The material formulation specially developed for this tube combines a very high mechanical strength with simultaneous elasticity of the material and thus enables the innovative, specific property profile of this bicycle tube.The valve is made of particularly impact- and break-resistant thermoplastic and is ahead of its time. Minimum weight coupled with maximum performance. A specially designed valve foot prevents damage to the hose due to sharp edges on the valve bore. The tough plastic minimizes valve breakage during the toughest trails with low air pressure.
ETRTO42-60/ 622 Inch 29 x 1,6-2,4 Sclaverand/ Presta 40
Westwood - Rim, 28 x 1 1 /2 38-635
Alu, black, , 36 holes, width: about 38 mm (~1,5 inches)
for example for 40 x 635 tires
Looks good on classics and oldtimers!
Diameter for calculating the length of the spokes: 622 mm (~24,49 inches)
Weight: 695 g (~1,53 pounds)
Aluminium Alloy Rim 26 inch., 102 mm (~4,01 inches) wide 144 holes
ETRTO: 559
double wall 102
the ultimate ultra fat custom chopper wheel
Wide:
102 mm (~4,01 inches)
inner size:
95 mm (~3,74 inches)
Holes:
144
colour:
raw
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1470 g (~3,24 pounds)
Limited Edition!
204 E-Speedster light grey with skin sidewall Extra Wide Tire 20 x 4
Now is your chance to get your hands on these limited edition speedster tires, only 100 produced worldwide in these slick and riveting colors.
Available exclusively at classic-cycle for a limited time while supplies last!
The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air.
102 - 406
26 TPI
Performance Compound
E-Bike 50, ECE - R75
8-20 PSI (0.6 - 1,4 bar)
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim.
Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure.
Weight: ~ 1455g / 3,21 lbs
If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.
This offer includes 1 piece only
204 Front Wheel MXUS Bafang 20 inch Fat Bike 80 mm black with disk mount
20 inch Fat Bike front wheel
black matte anodized alu rim,
36 Spokes 2,6 mm
strudy, strong and sexy
disc brake mount 44 mm 6 holes
over locknut dimension: 135 mm
axle 9,5 mm diameter with bolt on
rim width: 80 mm
weight: ~ 1550 g
Aluminium Alloy Rim 27,5 inch., 67 mm (~2,64 inches) wide, double wall
ETRTO: 584 mm
double wall 67
The ultimate ultra fat custom chopper wheel.
wide:
67 mm (~2,64 inches)
Inner size:
60 mm (~2,36 inches)
holes:
36
colour:
raw
Rim diameter for calculating the spoke length:
562 mm (~22,12 inches)
Weight:
~1278 g (~2,82 pounds)
Please check frame/fork for clearance!
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
144
colour:
raw
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Roll
Width: 100 mm (~3,94 inches)
Thick: 1,3 mm (~0,051 inches)
Length: 50 m ( ~ 164 ft)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
Aluminium Alloy Rim 26 inch., 102 mm (~4,01 inches) wide
ETRTO: 559
double wall 102
the ultimate ultra fat custom chopper wheel
Wide:
102 mm (~4,01 inches)
inner size:
95 mm (~3,74 inches)
Holes:
72
colour:
raw
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1470 g (~3,24 pounds)
Aluminium Rim 24 inch., 56 mm (~2.20 inches) wide
ETRTO: 507
single wall
rim aluminium 24 inch
Wide:
56 mm (~2,20 inches)
inner size:
50 mm (~1,97 inches)
Holes:
36
colour:
high polished
Rim diameter ERD for calculating the spoke length:
490 mm (~19,29 inches)
Weight:
800 g (~1,76 pounds)
Aluminium Alloy Rim 20 inch., 82 mm (~3,23 inches) wide
ETRTO: 406
double wall 82
Wide:
82 mm (~3,23 inches)
inner size:
75 mm (~2,95 inches)
Holes:
36
colour:
raw
Rim diameter for calculating the spoke length:
383 mm (~15,08 inches)
Weight:
1000 g (~2,20 pounds)
Tire Street Hog 20 x 3.0 cream
76-406
Semi Slick
Thick and strong tyre for up to 40 PSI / 2,75 Bar pressure.
This tyre fits all CLASSIC CYCLE 20" rims up to approx. 82 mm / 3.2 inches width!
Mounted on a 67 mm / 2.6 inches wide rim, the tyre has approximately the following dimensions:
It protrudes ~ 65 mm / 2.5 inches over the rim edge, is ~ 79 mm / 3.1 inches wide and has an overall diameter of ~ 550 mm / 21,65 inches.
1 piece
Aluminium Alloy Rim 20 inch., 80 mm (~3,15 inches) wide
ETRTO: 406
Wide:
80 mm (~3,15 inches)
inner size:
74 mm (~2,91 inches)
Holes:
36
colour:
black
Rim diameter for calculating the spoke length:
387 mm (~15,23 inches)
Weight:
780 g (~1,72 pounds)
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
Powder coated
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
144
colour:
black
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
Tire 24 x 3.0 cream
75-507
Semi Slick
Thick and strong tire for up to 20- 35 PSI pressure
Mounted approx. 75 mm wide
Total diameter depending on rim width and air pressure approx: 65.3 + / - 2 cm
Weight: approx. 1.6 kg
This tire fits all CLASSIC CYCLE 24" rims up to approx. 82 mm width! However, please note clearance in frame and / or fork!
Do not inflate the tire with 82 mm wide rims over 1.5 bar. There is a risk that the flank wire tears (-applies to all tires on extra-wide rims)
Shown is the tire mounted on a 82 mm wide rim from us.
1 piece
Tire 26 x 3.0 cream
75-557
Semi Slick
Thick and strong tire for up to 20- 35 PSI pressure
Mounted approx. 75 mm wide
Total diameter depending on rim width and air pressure approx: 705 mm + / - 20 mm
Weight: approx. 1.9 kg
This tire fits all CLASSIC CYCLE 26" rims up to approx. 82 mm width! However, please note clearance in frame and / or fork!
Do not inflate the tire with 82 mm wide rims over 1.5 bar. There is a risk that the flank wire tears (-applies to all tires on extra-wide rims)
Shown is the tire mounted on a 82 mm wide rim from us.
1 piece
Alu Rim 24 inch., 102 mm (~4,01 inchesa) wide, silver raw
No Holes
The ultimate wheel for custom style choppers / cruisers!
Fits perfect on wide tires!
This offer includes: 1 x rim without any holes for self drilling fans
wide:
100 mm (~4,01 inches)
Inner size:
94 mm (~3,70 inches)
holes:
0
colour:
silver raw
Diameter to calculate the length of the spokes:
486 mm (~19,13 inches)
All 24" Classic Cycle tires 3.0 and wider fit on these rims! But please check frame/fork for clearance!
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Roll
Width: 80 mm (~3,15 inches)
Thick: 1,1 mm (~0,043 inches)
Length: 50 m ( ~ 164 ft)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
€279.95*
€339.50*(17.54% saved)
This website uses cookies to ensure the best experience possible. More information...