Chain Adjuster for single speed, fixies BMX, ...
Community Bilder
Product information "Chain Adjuster for single speed, fixies BMX, ..."
Chain Adjuster for single speed, fixies, BMX, ...
- aluminium
- arm length: 68 mm (~2,68 inches)
- Weight: 110 gr. (~0,24 pounds)
- To assemble it a cantilever pivot is needed.
- Thread of the mounting screw: M10 x 1,0
Login
Customers also bought
Single Speed Converter Kit 18-16-14 Teeth
320071
€15.95*
Single Speed Converter kit
Two precision-machined spacers sandwich a single 18t-16t-14t cog to replace your entire 8, 9 or 10 speed cassette.
This item can help you to adjust the chainline
3 pinions /sprocket / cog steel: 18 Z, 16 Z, 14 T.
2 Spacer Alu: 20 mm (~0,79 inches), 13 mm (~0,51 inches)
New
Handlebar Reducer / Spacer 22,2 - 25,4 mm
Y965
€4.99*
Handlebar Reducer / Spacer 22,2 - 25,4 mm (~0,87 - 1 inch)
Reduces from 25,4 mm (~ 1 inch) to 22,2 mm (~0,87 inch)
2 pieces, alloy, corrugated
Length: 44 mm (~1,73 inches)
1/2 to 9/16 Pedal Thread Adaptors
Z-1320
€23.95*
1/2" to 9/16" Pedal Thread Adaptors
Black, CRO MO
These adaptor bushings have a male 1/2"-20 thread to fit into your one-piece crank, and a standard 9/16"-20 female thread that will let you install standard 9/16" pedals, even modern clipless pedals.
These install with a 15 mm (~0,59 inches) pedal wrench.
Length over all: 32 mm (~1,26 inches)
Brings the pedal 21 mm (~0,83 inches) more out
Weight 54 gr. (~0,12 pounds)/pair
Perfect Quality
9/16 Zoll = 14.28 mm
11/20 Zoll = 14 mm
1/2 Zoll = 12.7 mm
Tire Liner for tires 20-29 inch , width 100 mm / ~3,94 inch
CLSBND100x13x235
€18.95*
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 100 mm (~3,94 inches)
Thick: 1,3 mm (~0,051 inches)
Length: 2350 mm (~ 92,52 inches)
~ 400 g (~ 0,88 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.