Outer Cable Housing Black, for Brake 10 cm
For Brake
Sold by 10 cm (~3,94 inches)
0,49 Euro per 10 cm (~3,94 inches)
how to order:
100 cm (~3,94 inches) needed = 10 x 10 cm (~3,94 inches) = please order 10 pieces
when 150 cm (~59,05 inches) needed = 15 x 10 cm (~3,94 inches) = please order 15 piecesOuter Diameter: 4,5 mm
with black endcap
Compatible with all rim or drum brakes also MTB and racing Bikes
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
Order-no: 999
Tire Alarm Bell
chrome-plated housing
zinc-plated holder and handlebar lever
You will be loud and proud while operating this tire bell!
New !!! Better Version!!!
Building move: 56 cm (~22,05 inches)
Extension cable for Ebike
Technical data:
Connector: HIGO / Julet yellow 3PIN male, red 2 PIN female
Water resistance: IP65
Cable length: 19,5 cm / 7,67 inches
Plug connection: yellow male, red female
Outer material: ABS plastic
brake sensor adapter
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Old School Dress Guard / Skirt Protectors, multicoloured, fabric covered Rubber
new, one pair,
multicoloured: green, yellow, blue, grey, red
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Rear End Doublestand, 28/26 inch., with Adjustment
to be fixed at the rear axle, black, suitable for bikes up to to 90 kg (~198 pounds) without chain-shifting.
fits on many bikes and motor assisted bicycles, like 98ers for example
Width for tire: 88 mm (~3,46 inches)
Strong and sturdy quality with simple finish
Wheel Cover 26 inch., black
black plastic
Diameter of the hole in the middle: 56 mm (~2,2 inches)
Diamter over all: 540 mm (~21,26 inches)
2 pieces for one 26 inch rim
Stainless steel brake or shift cable clamp for 25.4 mm (~1 inch)
Clamp for the classic attachment of external trains / Bowden cable
Made of stainless steel with screw and nut
1 piece
Kickstand, from 20 - 29 inch.
alu, black
integrated spring
for chain strut
height from 28 cm to 37,5 cm (~11,02 to 14,76 inches)
Can be shortened further on with little technical efforts
Outer Cable Housing Black, for Shifter 10 cm (~3,94 inches)
For shifter
Sold by 10 cm (~3,94 inches)
0,49 Euro per 10 cm (~3,94 inches)
How to order:
100 cm (~3,94 inches) needed = 10 x 10 cm (~3,94 inches) = please order 10 pieces
when 150 cm (~59,05 inches) needed = 15 x 10 cm (~3,94 inches) = please order 15 piecesOuter Diameter: 4 mm
without endcap
Compatible with all inner wire of 1.1 - 1.6 mm (~0,04 - 0,06 inches) including Shimano, XLC Jagwire, ...
Innovative and beautiful mini bell made of copper
very loud and long lasting sound (100dB)
body made of copper
diameter 30 mm / 1,18 inch
innovative assembly using 2 different fastening clamps 22.2 - 40 mm / 0,87 - 1,57 inch in diameter
weight 48 g / 0,11 pounds
incl. rubber inlay
colour black
For the assembly, only the upper screw is loosened with the help of an Allen key. Choose the appropriate fastening clamp and tighten everything again.
High-Quality Universal Clip, Holder
can be fixed for example at the fork or frame tube
Impact-resistant plastic with anti-slip pads
Mounting by means of rotary knob on round or square tube of 10 - 50 mm (~0,39 - 1,97 inches) diameter
Mounting point is also rotatable
Package included: 1 piece
Vintage Saddle Bag Plastic for Tools, white
like in the 1970-80s
saddle bag for tools, plastic catcher
dimensions: 148 x 80 x 30 mm (~5,83 x 3,15 x 1,18 inches)
Stainless steel brake or shift cable clamp for 31.8 mm (~1,25 inches)
Clamp for the classic attachment of external trains / Bowden cable
Made of stainless steel with screw and nut
1 piece
Stainless steel brake or shift cable clamp for 28.6 mm (~1,12 inches)
Clamp for the classic attachment of external trains / Bowden cable
Made of stainless steel with screw and nut
1 piece
Disk Brake mount for rear end
easy fits with many frames
according to ISO 2000 standard
S235 steel, black
CNC mashined
Dimensionens: max length 108 mm (~4,25 inches)
Thickness at axle mount: 3 mm (~0,12 inches)
Thickness at disk brake mount: 10 mm (~0,39 inches)
Outer Cable Housing Silver Plaited Look Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Outer Cable Housing Chrome 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Innovative and beautiful mini bell made of copper
very loud and long lasting sound (100dB)
body made of copper
diameter 30 mm / 1,18 inch
innovative assembly using 2 different fastening clamps 22.2 - 40 mm / 0,87 - 1,57 inch in diameter
weight 48 g / 0,11 pounds
incl. rubber inlay
colour silver
For the assembly, only the upper screw is loosened with the help of an Allen key. Choose the appropriate fastening clamp and tighten everything again.
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 5,5 cm / 2,16 inches
Plug connection: red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Outer Cable Housing Glittering Pink Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Old School Dress Guard/ Skirt Protectors, red fabric covered Rubber
new, one pair,
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Old School Dress Guard / Skirt Protectors, black-silver marbled fabric covered Rubber
new, one pair,
black-silver marbled
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Inner Cable Housing for gear shift 2,2 m (~86,61 inches)
made of stainless wire
diameter: 1,2 mm X 2200 mm (~0,047 x 86,61 inches)
with barrel nipple 4 x 4 mm (~0,16 x 0,16 inches)
ready greased
1 piece
Old School Dress Guard / Skirt Protectors, white fabric covered Rubber
new, one pair,
30/28 hooks each side for 15 holes in the fender / mudguard
for 26 and 28 inch. frames
New and fresh production from Europe
Outer Cable Housing White 2,50 m x 5 mm
for shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
available in a lot of colours and designs
Old School Dress Guard / Skirt Protectors, brown fabric covered Rubber
new, one pair,
brown like natural leather
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Outer Cable Housing Grey / Black 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Outer Cable Housing Glittering Red Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Disc Brake Rotor 160 mm (~6,3 inches) with fixing screws
EN 14766 approved
Blister packing
with allen Key
only 96 gr. (~0,21 pounds)
Suitable Caliper: Item Number 360560
