Chain Gold 1/2 x 1/8
1,09 Euro per 10 cm (~3,94 inches)
how to order:
100 cm (~39,37 inches) needed = 10 x 10 cm (~3,94 x 3,94 inches) = 10 x 1,09 €
when 150 cm (~59 inches) needed = 15 x 10 cm (~5,9 x 3,94 inches) = 15 x 1,09 Euro
including one locking element (shackle) per chain
Chains cut to length on customer order are nonreturnable
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 80 mm (~3,15 inches)
Thick: 1,1 mm (~0,043 inches)
Length: 2350 mm (~ 92,52 inches)
~ 255 g ( ~ 0,56 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 100 mm (~3,94 inches)
Thick: 1,3 mm (~0,051 inches)
Length: 2350 mm (~ 92,52 inches)
~ 400 g (~ 0,88 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
Fat Bike Plastic Fender Set 26 x4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width
124 mm (~4,88 inches) wide, 26 inch., black matte
Can also be fitted on 24 x 4 1/4 Tires
complete plastic fender set for Fat Bikes or similar bike types
Width: 124 mm (~4,88 inches)
Hight: 35 mm (~1,38 inches)
Diameter inside: ~ 770 mm (~30,31 inches)
Diameter outside: ~ 810 mm (~31,89 inches)
Rear length in circumference: ~1190 mm (~46,85 inches)
Front length in circumference: ~ 700 mm (~27,56 inches)
Polycarbunate plastic black matte
Weight: ~ 1200 g. (~2,65 pounds)
1/2" to 9/16" Pedal Thread Adaptors
Black, CRO MO
These adaptor bushings have a male 1/2"-20 thread to fit into your one-piece crank, and a standard 9/16"-20 female thread that will let you install standard 9/16" pedals, even modern clipless pedals.
These install with a 15 mm (~0,59 inches) pedal wrench.
Length over all: 32 mm (~1,26 inches)
Brings the pedal 21 mm (~0,83 inches) more out
Weight 54 gr. (~0,12 pounds)/pair
Perfect Quality
9/16 Zoll = 14.28 mm
11/20 Zoll = 14 mm
1/2 Zoll = 12.7 mm
Fat Bike Plastic Fender Set 26 x4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width
124 mm (~4,88 inches) wide, 26 inch., black
Can also be fitted on 24 x 4 1/4 Tires
complete plastic fender set for Fat Bikes or similar bike types
Width: 124 mm (~4,88 inches)
Hight: 35 mm (~1,38 inches)
Diameter inside: ~ 770 mm (~30,31 inches)
Diameter outside: ~ 810 mm (~31,89 inches)
Rear length in circumference: ~1190 mm (~46,85 inches)
Front length in circumference: ~ 700 mm (~27,56 inches)
Polycarbunate plastic black glossy
Weight: ~ 1200 g. (~2,65 pounds)
Street Hog III Extra Wide Tire 20 x 4 1/4
Diameter: 406
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 80 mm (~3,15 inches) rim the tire is about 93 mm (~3,66 inches) wide and it will 70 mm (~2,75 inches) protrude over the rim.
Depending on the rim width and the air pressure, the tire has a total diameter of approx. 60 cm.
30TPI
Weight: ~ 1,67 kg (~3,68 pounds)
External Diameter of Street Hog III 20 x 4 1/4 on 82 mm (~3,23 inches) rim is ~560 mm (~22,05 inches) - May vary because of pressure.
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
Outer Cable Housing Black, for Brake 10 cm
For Brake
Sold by 10 cm (~3,94 inches)
0,49 Euro per 10 cm (~3,94 inches)
how to order:
100 cm (~3,94 inches) needed = 10 x 10 cm (~3,94 inches) = please order 10 pieces
when 150 cm (~59,05 inches) needed = 15 x 10 cm (~3,94 inches) = please order 15 piecesOuter Diameter: 4,5 mm
with black endcap
Compatible with all rim or drum brakes also MTB and racing Bikes
"E-Huntsman 20 x 4.0 inch tyre"
20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork!
Dimensions / Details:
ETRTO: 102 x 406
Max: 36 PSI / 2,5 Bar / 250 kPa
Over Ride E-Bike ready 50
Material: EndC - Endurance Compound
Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge.
Total diameter: 60 cm / 23,62 inches
Offered is a tyre without rim.
Weight: ~ 2250 g / ~ 4,96 lbs.
204 Fat Bike Plastic Fender Set 20 x 4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width
Mudguards with four stainless steel struts and mounting hardware for Fat Bikes 20 x 4.0 - 4.8 or similar.
Due to the variably adjustable struts, the mounting points on the frame can be flexibly selected.
The fenders are therefore also suitable for many common 20-inch Fat E-bikes.
124 mm (~4,88 inches) wide, 20 inch., black matte
complete plastic fender set for Fat Bikes or similar bike types
Width: 124 mm (~4,88 inches)
Hight: 35 mm (~1,38 inches)
Diameter inside: ~ 550 mm (~21,65 inches)
Diameter outside: ~ 610 mm (~24 inches)
Rear length in circumference: ~ 960 mm (~37,8 inches)
Front length in circumference: ~ 620 mm (~24,4 inches)
Polycarbunate plastic black matte
Weight: ~ 1080 g. (~2,65 pounds)
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 75-100 x 406 / 20" x 3.3 - 4.0
*Tube - 60 - 100 x 406 / 20 x 2.4 - 3.5
Rim - 50 - 102 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 350 g
scope of delivery: 1 piece
*Attention: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 2.5 - 3.5 is recommended.
204 Kenda Krusade Extra Wide Tire 20 x 4
Diameter: 406
98 - 406
Ideal for the 20 inch fat e-bikes!
This tire fits on all 20" Classic Cycle rims wider than 67 mm (~2,64 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,22 inches) rim the tire is about 95 mm (~3,74 inches) wide and it will 79 mm (~3,11 inches) protrude over the rim.
Diameter over all on this rim: 580 mm (22,83 inches)
60 TPI
5-30 PSI / 0,4 -2.1 bar / 40 - 210 KPA
Weight: ~ 990 g (~ 2,18258 pounds)
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
This offer includes 1 piece only
Sting-Ray Handlebar Black
for the Sting-Ray or similar cult bikes of the 60s and 70s
black steel
dimensions: about 660 x 350 mm (25,9 x 13,78 inches)
for 22 mm (0,87 inches) stems
Fat Bike Tire Classic Cycle Zig Zag 26 x 4.0 whitewall
97/102-559
72 TPI = Lightweight and strong!
max load = 155kg/pc
About 87 mm (~4,25 inches) wide on a 80 mm (~3,15 inches) rim.
About 107 mm (~4,21 inches) wide on a 100 mm (~3,94 inches) rim.
This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance!
The pictures shows the new Zig Zag Tire assembled on a 132 mm (~5,2 inches) wide rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/- 0,79 inches) concerning to pressure and rim diameter.
Weight: 1890 g (~4,17 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 piece
Tube recommendation: For rim widths up to 102 mm (~4 inches): 26 x 4.0 tube. For wider rims: till 26 x 5.0 tube
Notice:
The white sidewall has a very slight bluish tinge.The bluish part is to prevent yellowing.
Aluminium Alloy Rim 20 inch., 82 mm (~3,23 inches) wide
ETRTO: 406
double wall 82
Wide:
82 mm (~3,23 inches)
inner size:
75 mm (~2,95 inches)
Holes:
36
colour:
black
Rim diameter for calculating the spoke length:
383 mm (~15,08 inches)
Weight:
~ 1040 g (~2,3 pounds)
Head Set Adapter kit 1 - 1 1/8 inch.
2 pieces, alloy
to install into head of the frame to reduce head tube for using head set with smaller diameter
to reduce 1 1/8" to 1"
outer diameter: 34,0 mm (~1,34 inches)
inner diameter: 30,2 mm (~1,19 inches)
Very cool and beautiful tyre made of well-known and high quality production. Mounted on our 82 mm (~3,23 inches) wide rims. Total diameter mounted depending on pressure and rim width: ~ 705 mm (~27,75 inches)
70-559
100-250 kpa
1.0-2.5. Bar
15-36 PSI
1.35 kg (~2,98 pounds)
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
Aluminium Alloy Rim 20 inch., 82 mm (~3,23 inches) wide with cut out
ETRTO: 406
double wall 82
Wide:
82 mm (~3,23 inches)
inner size:
75 mm (~2,95 inches)
Holes:
36 (offset from the middle 15,5 mm)
colour:
black
Rim diameter for calculating the spoke length:
383 mm (~15,08 inches)
Weight:
882 g (~1,95 pounds)
Washer to fix on axle
Washer made out uf steel with UCP finish to fix under the axle nut to offer a assembling point for fenderstays or something else.
Big Hole: 9 mm (~0,35 inches)
Small hole: 5,6 mm (~0,22 inches)
Perhaps you need to open up the bigger hole for another 1 mm (~0,04 inches) to fix it on rear axles.
1 Piece
Total length: ~ 4 cm / ~ 1,575 inch
Tire Street Hog 20 x 3.0 white wall
76-406
Semi Slick
Thick and strong tyre for up to 40 PSI / 2,75 Bar pressure.
This tyre fits all CLASSIC CYCLE 20" rims up to approx. 82 mm / 3.2 inches width!
Weight: ~ 1280 g / 2,82 lbs
Mounted on a 67 mm / 2.6 inches wide rim, the tyre has approximately the following dimensions:
It protrudes ~ 65 mm / 2.5 inches over the rim edge, is ~ 79 mm / 3.1 inches wide and has an overall diameter of ~ 550 mm / 21,65 inches.
1 piece
Apehanger Shorty Handlebar Black
black Hi-Ten steel
dimensions: about 800 x 450 mm (~31,50 x 17,72 inches)
for 22,2 mm (~0,87 inches) stems
The decent cruiser chopper apehanger!
Tire Street Hog 20 x 3.0 pure black
76-406
Semi Slick
Thick and strong tyre for up to 40 PSI / 2,75 Bar pressure.
This tyre fits all CLASSIC CYCLE 20" rims up to approx. 82 mm / 3.2 inches width!
Mounted on a 67 mm / 2.6 inches wide rim, the tyre has approximately the following dimensions:
It protrudes ~ 65 mm / 2.5 inches over the rim edge, is ~ 79 mm / 3.1 inches wide and has an overall diameter of ~ 550 mm / 21,65 inches.
1 piece
Alu Hub, Bolt on, black for front wheel for Disc Brake
Sealed bearings
Mounting size: 100 mm (~3,94 inches)
Flange width: 58 mm (~2,28 inches)
Axle Length: 155 mm (~6,10 inches)
Pitch Circle Diameter: 58 mm (~2,28 inches)
Spoke Holes: 36 Holes 14G = 2 mm (~0,08 inches) Spokes
Weight: ~ 335g (~0,73 pounds)
with black bolts
Bolt on. NO quick release!!
Stickshifter for Shimano 3 speed
Solid stickshifter made of partial polished steel with black nicely moulded plastic knob
complete length: 14,5 cm
width of mount: 6,3 cm
speeds snap into place
mounts with two wholes for frame assembling
This gear lever was previously imported and distributed by The Chopperdome of 1055 LZ Amsterdam, Admiraal de Ruijterweg 346.
Tire Kenda Kraze 20 x 4 1/4
97-406
THE ultra fat custom tire with oldschool tread
The ultimate custom cruiser tire for maximum performance!
On 82 mm (~3,23 inches) rim as shown it is 98 mm (~ 3,86 inches) wide and 61 mm (~ 2,4 inches) high (above the rim).
This tire fits rims of widths 67 mm (~2,64 inces) to 102 mm (~4,02 inches) width!
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
But please check frame/fork for clearance!
Weight: 1430 g (~ 3,15 pounds)
30 TPI
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 100 -120 x 406 / 20" x 4.0 - 4.8
*Tube - 90 - 120 x 406 / 20 x 3.0- 4.0
Rim - 65 - 140 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 360 g
scope of delivery: 1 piece
*Please note: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 3.0 - 3.75 is recommended.
From our list the Kenda Kraze 20 x 4.0 won't fit. It is not bollooning enaugh.
Extension cable for Ebike
Technical data:
Connector: HIGO / Julet yellow 3PIN male, red 2 PIN female
Water resistance: IP65
Cable length: 19,5 cm / 7,67 inches
Plug connection: yellow male, red female
Outer material: ABS plastic
brake sensor adapter
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Street Hog III Monster Tire 24 x 4 1/4 pure black
for custom and chopper bikes
Inflate to 30 P.S.I.
Overall diameter on a 100 mm (~3,94 inches) rim: ~ 655 mm (~25,79 inches)
Overall diameter on a 80 mm (~3,15 inches) rim: ~ 665 mm (~25,79 inches)
On a 100 mm (~3,94 inches) rim the tire is about 103 mm (~4,05 inches) wide.
On a 80 mm (~3,15 inches) rim the tire is about 93 mm (~3,63 inches) wide.
Overall diameter, depending on rim width and air pressure about: 66 cm (~25,98 inches) + / - 2 cm (~0,79 inches).
ETRTO:108 - 507
Weight: 1,95 kg ( ~4,30 pounds)
This tire fits on all 24" Classic Cycle rims wider than 50 mm till 132 mm rims. But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
Vintage tires 28 x 1 1/2 40 - 635 blackwithout Cold Patch branding700 x 35 B40-635: Please note the exact diameter of your rim.There are also 28er rims with 622 mm (~24,49 inches) diameterTire color: blackVery stable quality with historical block profileClincherUp to 55 PSi air pressure1 piece
Wheel Cover 20 inch black
black plastic
Diameter of the hole in the middle: 70 mm (~2,76 inches)
Overall diameter: 385 mm (~15,16 inches)
2 pieces for one 20 inch rim
Classic Cycle Tire black with white wall
28 x 1 1/2 40 x 635 700 x 38 B
colour: black with white sides
Very stable quality with vintage block / brick-profile.
Max Load : 150 kg (~330,69 pounds)
Inflate to 50 psi
40-635 Please check out the exact diameter of the rim. There are also existing 622 mm (~24,49 inches) rims.
Old School Dress Guard / Skirt Protectors, multicoloured, fabric covered Rubber
new, one pair,
multicoloured: green, yellow, blue, grey, red
30/28 hooks each side
for 26 and 28 inch. frames
New and fresh production from Europe
Block Pedals 9/16 without Reflector Big Diamond Cut*
chrome-plated for bikes and motorbikes, 9/16 inch thread, pair with big diamond cut
The blocks are 98 mm (~3,86 iches) long
articles marked with* are not made for public use according to the german StVZO
(ONLY important for buyers from GERMANY!!!)
Highriser Handlebar black
For the Polo Bike or similar cult bikes of the 60s and 70s.
black steel
Dimensions:
Grip width: 640 mm (~25,20 inches)
Grip hight: 325 mm (~12,79 inches)
Grip length: 120 mm (~4,72 inches)
for 25,4 mm (~1 inch) stems
Rear End Doublestand, 28/26 inch., with Adjustment
to be fixed at the rear axle, black, suitable for bikes up to to 90 kg (~198 pounds) without chain-shifting.
fits on many bikes and motor assisted bicycles, like 98ers for example
Width for tire: 88 mm (~3,46 inches)
Strong and sturdy quality with simple finish
Tire Street Hog 26 x 2.35, black white wall without black lettering
Semi Slick Tire
thick and strong!
the ultimate nostalgia custom cruiser hot rod tire!
40-65 PSI
about 65 mm wide on a 56 mm rim
about 57 mm wide on a 39 mm rim
Overall diameter, depending on rim width and air pressure about: 65 cm + / - 2 cm Weight: 1.15 kg
This tire fits on all 26" Classic Cycle rims up to 67 mm width!
But please check frame/fork for clearance!
Please be aware that
If you assemble the tire on wide rims not to put more pressure than 20 PSI
€29.95*
This website uses cookies to ensure the best experience possible. More information...
