Frame and Fork Protectorsfor Double Crown Forks 30
to protect Your frame and your double crown fork from dings and dents!
30 mm (~1,18 inches), 1 pair for 32 mm (~1,26 inches) tubes
Frame and Fork Protectorsfor Double Crown Forks 50
to protect Your frame and your double crown fork from dings and dents!
50 mm (~1,97 inches), 1 pair for 32 mm (~1,26 inches) tubes
Double Crown Fork 62,5 cm (~24,61 inches) white, 1 1/8 steerer
noble and supercool, for 26 inch. wheels, 1 1/8 inch steerer
alloy triple trees and white steel fork tubes for V- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 265 mm (~10,43 inches)
width in between fork tubes: about 93 mm (~3,66 inches)
Diameter of fork legs: 31,8 mm (~1,25 inches)
Inner width of legs 29,2 mm (~1,15 inches)
fork tube length: about 625 mm (~24,61 inches)
Width between dropouts: 100 mm (~3,94 inches)
Colour: chrome plated
Double Crown Fork 69 cm (~27,16 inches) black matte
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
If you have a frame which needs a 1 1/8 fork steerer you may need item 390627 and 968.
alloy triple trees and black steel fork tubes for disc brakes
the ultimate fork for custom chopper and cruiser freaks!
Steerer length: 300 mm (~11,81 inches)
fork tube inner width: about 94 mm (~3,70 inches)
fork tube length: about 690 mm (~27,16 inches)
Width between dropouts: 110 mm (~4,33 inches)
Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches)
Inner Diameter of fork legs tubes: 35 mm (~1,38 inches)
Steerer length can be adjusted with the variable position of the bridges.
Double Crown Fork long shaft, offset 84, black 1 1/8 Schaft
noble and supercool, for 20-28 inch. wheels, 1 1/8" inch steerer
alloy triple trees and black steel fork tubes
with mount for disc brake
steerer length: 320 mm (~12,60 inches)
fork tube inner width: about: ~ 92 mm (~3,62 inches)
fork tube length: about: ~ 840 mm (~33,07 inches)
Width between dropouts: ~ 100 mm (~3,94 inches)
The length of shaft can be adjusted
Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches)
inner diameter of fork legs: ~ 28,8 mm (~1,13 inches)
Offset between shaft and fork legs: ~ 50 mm (~1,97 inches)
Bridges are mounted with allen screws
Fork tubes can be shortened above
204 Suspension Fork RST Guide 20 Zoll TNL Fatbike 1 1/8 Ahead for Disk Brake
Turn & Lock-out A hydraulic cartridge damping system with compression adjustment to lockout function.
The RST Guide TNL is the Suspension Fork for 20" Fat Bikes / Urban E-Bikes
for 20 inch wide wheels with 135 mm hubs.
Lockout and Preload adjustable
1 1/8" steerer Ahead
Weight: ~. 3,37 kgs (with 200 mm long steerer)
For Disc brake Post Mount 6
comes with manual
Steerer length
260 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
420 mm
For Hub width:
135 mm
Travel:
45 mm
Ssytem:
Coil in left stanchion
Damping:
Oil in right stanchion
GUIDE 20 MODEL TNL
STEERER: 28.6mm Steel
CROWN PITCH: 180 mm
CROWN: Aluminum Black Coating
STANCHION: 32mm Steel CP Finish
CASTING: Aluminum 9mm Open Dropout
ADJUSTMENT: L, P
FEATURES: Hydraulic Lock-Out
SYSTEM: Oil (Right), Coil (Left)
Coil TRAVEL (mm) 20": 45 mm
BRAKE TYPE: Disc Only (160mm without adapter)
WEIGHT (kgs) (w/ 200mm steerer) 3.37
Extra Wide Double Crown Fork 660 mm black 1 1/8 steerer
noble and supercool, for 20-26 inch. wheels, 1 1/8 inch steerer,
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Double Crown Fork 69 cm (~27,16 inches) black matte 1 1/8 steerer
noble and supercool, for 20-28 inch. wheels, 1 1/8 inch steerer
alloy triple trees and black steel fork tubes for disc brakes
the ultimate fork for custom chopper and cruiser freaks!
Steerer length: 300 mm (~11,81 inches)
fork tube inner width: about 94 mm (~3,70 inches)
fork tube length: about 690 mm (~27,16 inches)
Width between dropouts: 110 mm (~4,33 inches)
Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches)
Inner Diameter of fork legs tubes: 35 mm (~1,38 inches)
Steerer length can be adjusted with the variable position of the bridges.
Double Crown Fork 69 cm CP 1 1/8 Steerer
noble and supercool, for 20-28 inch. wheels, 1 1/8 inch steerer
alloy triple trees and cp steel fork tubes for disc brakes
the ultimate fork for custom chopper and cruiser freaks!
Steerer length: 300 mm (~11,81 inches)
fork tube inner width: about 94 mm (3,70 inches)
fork tube length: about 690 mm (~24,16 inches)
Width between dropouts: 110 mm (~4,33 inches)
Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches)
Inner Diameter of fork legs tubes: 35 mm (~1,38 inches)
Steerer length can be adjusted with the variable position of the bridges.
Double Crown Fork 63 cm black 1 1/8 steerer
noble and supercool, for 26 inch. wheels, 1 1/8 inch steerer
Alloy triple trees and black steel fork tubes for drum- or disc brakes.
The ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,39 inches)
fork tube length: about 630 mm ( ~24,80 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Double Crown Fork long shaft, offset 84, black
noble and supercool, for 20-28 inch. wheels, 1" inch steerer
alloy triple trees and black steel fork tubes
with mount for disc brake
steerer length: 320 mm (~12,60 inches)
fork tube inner width: about: ~ 92 mm (~3,62 inches)
fork tube length: about: ~ 840 mm (~33,07 inches)
Width between dropouts: ~ 100 mm (~3,94 inches)
The length of shaft can be adjusted
Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches)
inner diameter of fork legs: ~ 28,8 mm (~1,13 inches)
Offset between shaft and fork legs: ~ 50 mm (~1,97 inches)
Bridges are mounted with allen screws
Fork tubes can be shortened above
Classic Cycle Double Crown Chopper Springer Fork for Disc Brake 1 1/8 steerer
One of the most beautiful chopper springer forks you can get!
Chrome-plated, noble and supercool for 20-26 inch. wheels up to 3.00!
CroMo Steel and Alu Bridges
A - Distance between axle and handlebar attachments: 1000 mm (~39,37 inches)
B - Diameter of thicker fork tube: 29 mm (~1,14 inches)
C - Distance between springer shafts: 108 mm (~4,25 inches)
D - For hub width of: 100 mm (~3,94 inches)
E - Steerer length: 270 mm (~10,63 inches)
F - 1 1/8 inch steerer
G - Minimum width (outer edge - outer edge of the lift): 77 mm (~3,03 inches)
H - Handlebar mount 22.2 mm
I - Distance between axle mount and lower bridge: 580 mm ( ~ 22,83 inches)
The shaft and the fork tubes can be shortened.
The fork is supplied with a mount for the disc brake (for brake discs without an adapter up to 160 mm / ~6,3 inches in diameter).
Weight: ~ 6,5 kg (~14,33 pounds)
Frame and Fork Protectorsfor Double Crown Forks 30
to protect Your frame and your double crown fork from dings and dents!
55 mm (~2,16 inches), 1 pair for 30 - 32 mm (~1,18 - 1,26 inches) tubes
Extra wide and fat Double Crown Fork, 700 mm (~27,56 inches), 50 mm (~1,97 inches), black, up to 28"
50 mm (~1,97 inches) tubes! Superfat!
noble and supercool, for up to 28 inch. wheels, 1 1 /8 inch steerer,
Alloy triple trees and chrome-plated steel fork tubes for discbrakes.
The ultimate fork for custom chopper and cruiser freaks!
A - fork tube length: about 700 mm (~27,56 inches)
B - Fork tube diameter: 50.8 mm (~2 inches)
C - Fork tube inner width: 125 mm (~4,92 inches)
D - Width between axle mounts: 150 mm (~5,90 inches)
E - Steerer length: 300 mm (~11,81 inches)
F - Steerer diameter: 1 1/8 inch - 30 mm
G -Distance outside edges of the risers: 95 mm (~3.74 inches)
H - Handlebar mount: 22.22 mm
weight: 3,95 kg (~8,71 pounds)
You can shorten the tubes and stem.These fork is developed for 100 mm (~3,94 inches) rims.
Downhill Upside - Down Suspension Fork up to 26"
perfect for the cool look of a heavy motobike.
As ridden by Mountainbike Racing's team leader, the range-topping this downhill fork now offers 180 mm (~7,09 inches) of smooth travel from and MCU & spring dumper with rebound adjustment.
It needs a 20 mm (~0,8 inches) thru axle (110 mm (~4,3 inches) hub width) and offers
disc brake mount IS2000
Noble and supercool till 26 inch. wheels, 1 1/8 steerer
Size: 26" Downhill
Crown: alloy forged dimension: 150 mm (~5,9 inches) (middle to middle)
Preload: Rebound / Compression
Bridges / crowns: forged, T6 heated, 6061 Aluminium
Stanchion: butted, T8 heated, 6061 Aluminium
Tubes: hard-anodised, T9 heated, 6061 Aluminium
Dumper: MCU & Spring
Max. Travel: ~ 180 mm (~7,08 inches)
Width between tubes: ~ 103 mm (~4,06 inches)
Steerer length: ~230 mm (~9,06 inches)
width between axle mounts: 110 mm (~4,33 inches)
with 20 mm thru axle (~0,79 inches)
fork tube length: ~ 750 mm (~29,53 inches)
Distance between legs / slider: ~103 mm (~4,06 inches)
Diameter lower standpipe: ~ 45 mm - in the area of the bridges: ~ 47.5 mm
Slider tube diameter: ~ 37 mm
Distance between Axle and lower crown: ~ 510 mm (~20,08 inches) - is matter of how you assemble the crown
Weight: ~ 4,35 kg (~9,59 pounds)
Suitable Hub: Item: 326330
Double Crown Fork 63 cm
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,38 inches)
fork tube length: about 630 mm (~24,8 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Extra Wide Double Crown Fork 900 mm black 1 1/8 Steerer
noble and supercool, for 20-28 inch wheels
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 900 mm (~35,43 inches)
CRMO fork diameter: 32 mm (~1,26 inches)steerer length: 295 mm (~11,61 inches)
1 1/8 inch steerer
Double Crown Fork 63 cm black
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
Alloy triple trees and black steel fork tubes for drum- or disc brakes.
The ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
width between fork tubes: approx. 86 mm (~3,39 inches)
fork tube length: about 630 mm ( ~24,80 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Double Crown Fork 69 cm CP
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
If you have a frame which needs a 1 1/8 fork steerer you may need item 390627 and 968
alloy triple trees and cp steel fork tubes for disc brakes
the ultimate fork for custom chopper and cruiser freaks!
Steerer length: 300 mm (~11,81 inches)
fork tube inner width: about 94 mm (3,70 inches)
fork tube length: about 690 mm (~24,16 inches)
Width between dropouts: 110 mm (~4,33 inches)
Outer Diameter of fork legs tubes: ~ 38,3 mm (~1,51 inches)
Inner Diameter of fork legs tubes: 35 mm (~1,38 inches)
Steerer length can be adjusted with the variable position of the bridges.
Double Crown Fork 63 cm
noble and supercool, for 26 inch. wheels, 1 1/8 inch steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm (~10,24 inches)
fork tube inner width: about 86 mm (~3,38 inches)
fork tube length: about 630 mm (~24,8 inches)
Width between dropouts: 100 mm (~3,94 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
UD 204 Double Crown Suspension Fork Fatbike air-suspension, matt black
For 20 inch wheels with hubs of 135 mm installation width.
Adjustable preload.
1 1/8" shaft Ahead
Distance between axle centre and shock tower: ~ 330 mm
Distance between upper edge of upright pipes to axle mount: ~ 600 mm
Weight approx. 2.7 kg (with 220 mm shaft)
For disc brake disc (160 mm without adapter) PostMount
Scope of delivery: 1 piece
Steerer length
220 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
420 mm
For Hub width:
135 mm
Travel:
~ 100 mm
Suspension:
Air in left stanchion
Damping:
Oil in right stanchion
Distance between steerer tubes at tyre height:
~ 115 mm
Original fork of the bikes from Urban Drivestyle Berlin!
Extra wide and fat Double Crown Fork, 700 mm (~27,56 inches), 50 mm (~1,97 inches), black, up to 28"
50 mm (~1,97 inches) tubes! Superfat!
noble and supercool, for up to 28 inch. wheels, 1 inch steerer
Alloy triple trees and chrome-plated steel fork tubes for discbrakes.
The ultimate fork for custom chopper and cruiser freaks!
A - Fork tube length: about 700 mm (~27,56 inches)
B - Fork tube diameter: 50.8 mm (~2 inches)
C - Fork tube inner width: 125 mm (~4,92 inches)
D - Width between axle mounts: 150 mm (~5,90 inches)
E - Steerer length: 300 mm (~11,81 inches)
F - Steerer diameter: 1 inch
G -Distance outside edges of the risers: 95 mm (~3.74 inches)
H - Handlebar mount: 22.22 mm
weight: 3,95 kg (~8,71 pounds)
You can shorten the tubes and stem.
These fork is developed for 100 mm (~3,94 inches) rims.
Demon Fork TSP Custom Fork
Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Innovative, italian Design connects rolling easiness with reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 20 till 28 inch tires
up to 102 mm (~4,01 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down to 80 mm (~3,15 inches)
Brake mounts for disk
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount).
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
Classic Cycle Double Crown Chopper Springer Fork for Disc Brake
One of the most beautiful chopper springer forks you can get!
Chrome-plated, noble and supercool for 20-26 inch. wheels up to 3.00!
CroMo Steel and Alu Bridges
A - Distance between axle and handlebar attachments: 1000 mm (~39,37 inches)
B - Diameter of thicker fork tube: 29 mm (~1,14 inches)
C - Distance between springer shafts: 108 mm (~4,25 inches)
D - For hub width of: 100 mm (~3,94 inches)
E - Steerer length: 270 mm (~10,63 inches)
F - Shaft diameter: 1 inch / 25,4 mm
G - Minimum width (outer edge - outer edge of the risers): 77 mm
H - Handlebar mount: 22.2 mm (~0,9 inches)
I - Distance between axle mount and lower bridge: 580 mm ( ~ 22,83 inches)
The shaft and the fork tubes can be shortened.
The fork is supplied with a mount for the disc brake (for brake discs without an adapter up to 160 mm / ~6,3 inches in diameter).
Weight: ~ 6,5 kg (~14,33 pounds)
UD Moke steerer for double crown forkLength: 16,5 cm
Diameter: 28.6
Material: steel
With matching M10 Allen screw and Urban Drivestyle aluminum cap with gasket
Original shaft of the double bridge fork of the Moke Bikes from Urban Drivestyle Berlin!
Double Crown Fork 84, chrome and polished aluminium with 1 1/8 steerer
noble and supercool, for 20-28 inch. wheels, 1 1/8 inch steerer
alloy triple trees and chrome steel fork tubes
with mount for disc brake
steerer length: 320 mm (~12,60 inches)
fork tube inner width: about: ~ 92 mm (~3,62 inches)
fork tube length: about: ~ 840 mm (~33,07 inches)
Width between dropouts: ~ 100 mm (~3,94 inches)
The length of shaft can be adjusted
Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches)
inner diameter of fork legs: ~ 28,8 mm (~1,13 inches)
Offset between shaft and fork legs: ~ 50 mm (~1,97 inches)
Bridges are mounted with allen screws
Fork tubes can be shortened above
Adapter Diskbrake Mount for TSP Demon Fork and Double Crown ForkWith this innovative mount you can use a diskbrake with a disk up to 160 mm diameterThe mount is raw and unlaquered.
Extra Wide Double Crown Fork 660 mm
Noble and supercool, for 20-26 inch. wheels, 1 inch stem, incl. spacer for 1 1/8 frame steerer.
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Double Crown Fork 73, chrome and polished aluminium
noble and supercool, for 26 inch. wheels, 1" inch steerer
alloy triple trees and chrome steel fork tubes with cantilever-/v-brake-pivots
Against the picture without clip for drum brake arm
also suitable for disc brake
steerer length: 265 mm (~10,43 inches)
fork tube inner width: about 86 mm (~3,38 inches)
fork tube length: about 730 mm (~28,74 inches)
Width between dropouts: 100 mm (~3,94 inches)
Double Crown Fork 84, chrome and polished aluminium
noble and supercool, for 20-28 inch. wheels, 1" inch steerer
alloy triple trees and chrome steel fork tubes
with mount for disc brake
steerer length: 320 mm (~12,60 inches)
fork tube inner width: about: ~ 92 mm (~3,62 inches)
fork tube length: about: ~ 840 mm (~33,07 inches)
Width between dropouts: ~ 100 mm (~3,94 inches)
The length of shaft can be adjusted
Outer Diameter of fork legs : ~ 31,8 mm (~1,25 inches)
inner diameter of fork legs: ~ 28,8 mm (~1,13 inches)
Offset between shaft and fork legs: ~ 50 mm (~1,97 inches)
Bridges are mounted with allen screws
Fork tubes can be shortened above
Extra Wide Double Crown Fork 900 mm black
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakesFork tube length: 900 mm (~35,43 inches) Diameter tube: 32 mm (~1,26 inches) Fork tube inner width: about 144 mm (~5,67 inches) Width between axle mounts: 150 mm (~5,90 inches) Steerer length: 295 mm (~11,61 inches) Steerer diameter: 1 inch (25,4 mm)
Extra Wide Double Crown Fork 900 mm
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
Fork tube length: 900 mm (~35,43 inches)
Diameter tube: 32 mm (~1,26 inches)
Fork tube inner width: about 144 mm (~5,67 inches)
Width between axle mounts: 150 mm (~5,90 inches)
Steerer length: 295 mm (~11,61 inches)
Steerer diameter: 1 inch (25,4 mm)
Extralong Double Crown Fork 83
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 260 mm
fork tube inner width: about 86 mm
fork tube length: about 830 mm
diameter of the forklegs: 31,8 mm
Width between dropouts: 100 mm
Long Double Crown Fork 73
noble and supercool, for 26 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy triple trees and chrome-plated steel fork tubes for drum- or disc brakes
the ultimate fork for custom chopper and cruiser freaks!
steerer length: 220 mm (~8,66 inches)
width between fork tubes: approx. 86 mm (~3,38 inches)
fork tube length: about 730 mm (~28,74 inches)
Outer Diameter of fork legs tubes: 31,8 mm (~1,25 inches)
Inner Diameter of fork legs tubes: 28,8 mm (~1,13 inches)
Extra Wide Double Crown Fork 900 mm CP 1 1/8 Steerer
noble and supercool, for 20-28 inch wheels
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
CRMO fork tube length: 900 mm (~35,43 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
steerer length: 295 mm (~11,61 inches)
1 1/8 inch steerer
Extra Wide Double Crown Fork 660 mm 1 1/8
Noble and supercool, for 20-26 inch. wheels, 1 1/8 inch steerer
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
UD 204 Suspension fork for fatbike air suspension, matt black
For 20 inch wheels with hubs of 135 mm installation width.
Adjustable preload.
1 1/8" shaft Ahead
Distance between axle centre and shock tower: ~ 330 mm
Distance between axle mount and end of uprights: ~ 430 mm
Weight approx. 2.2 kg (with 220 mm shaft)
For disc brake disc (160 mm without adapter) PostMount
Scope of delivery: 1 piece
Steerer length
220 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
465 mm
For Hub width:
135 mm
Travel:
~ 100 mm
Suspension:
Air in left stanchion
Damping:
Oil in right stanchion
Distance between steerer tubes at tyre height:
~ 115 mm
Original fork of the bikes from Urban Drivestyle Berlin!
Hope brake adapter B for PM on IS fork 203mm / rear triangle 183 mm silver.
Hope adapter for mounting postmount brakes on IS2000 fork or frame. Can be used for rear wheel with 183 mm brake disc or front wheel with 203 mm brake disc.
Please also note the data sheet below when choosing the right adapter!
Post Mount to IS
for 183 mm rear brake disc
for 203 mm front brake disc
incl. mounting bolts
silver
Disc brake adapter IS PM 160F-140R
Disc brake adapter for conversion from International Standard to Postmount 140 mm on the rear wheel or from International Standard to Postmount 160 mm on the front wheel.
Postmount adapter
for 160 mm front brake disc
for 140 mm rear brake disc
incl. mounting bolts
black
Double crown fork 750 mm chrome plated 1 1/8 inch shaftchrome-plated, 1 1/8 inch shaftshaft length: 250 mm
Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 750 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: ~ 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.Weight: ~ 2.54 kg
UD 204 Double Crown Suspension Fork Fatbike, matt black
For 20 inch wheels with hubs of 135 mm installation width.
1 1/8" shaft Ahead
Distance between axle centre and shock tower: ~ 325 mm
Distance between axle mount and end of uprights: ~ 600 mm
Weight approx. 2.7 kg (with 270 mm shaft)
For disc brake disc (160 mm without adapter) PostMount
Scope of delivery: 1 piece
Steerer length
270 mm
Steerer diameter / stem width:
28,6 mm
Steerer diameter at cone seat:
30 mm
Installation hight:
420 mm
For Hub width:
135 mm
Travel:
~ 100 mm
Suspension:
unidentified
Damping:
unidentified
Distance between steerer tubes at tyre height:
~ 120 mm
Original fork of the bikes from Urban Drivestyle Berlin!
Disc brake adapter from Magura QM 5, IS to PM.
Adapter enables the use of 203 mm brake discs on forks with IS 6" mount.
The adapter is screwed onto the IS mount of the fork and allows the use of a postmount brake caliper.
Front brake disc: 203 mm
Fork mount: IS 6
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Adapter for disc brake PM-PM-F180
The front adapter is designed to mount a Post Mount (PM) standard brake caliper to a frame with the same PM standard.
In this version it allows the use of a 180 mm brake disc on the fork.
Post Mount bracket
for 180 mm front brake disc
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
Double Crown TSP Custom Fork raw
NEW !!!
Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Straight Italian Design guarantees reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
black matte
for 20 till 28 inch tires
up to 102 mm (~4 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down
with disk brake mount
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount)
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 107 mm (~4,12 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for rims up to 100 m (~3,94 inches).
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.Weight: ~ 2,5 kg
Made in Italy
Magura QM41 disc brake adapter, IS2000
Adapter allows the use of 180 mm brake discs on the rear triangle with IS2000 mount.
The adapter is screwed to the IS mount of the rear triangle and allows the use of a postmount brake caliper.
Rear brake disc: 160 to 180 mm
rear wheel mount: IS2000
incl. mounting bolts
black
General information:
POSTMOUNT ADAPTERThe postmount mounting standard is used on most suspension forks and frames. There are usually PM6" (direct mounting of 160 mm brake discs), PM7" (180 mm) and PM8" (203 mm). Postmount adapters allow the mounting of different brake disc diameters.
IS 2000 ADAPTERWith the less common IS2000 standard, brake callipers or adapters are bolted to the side of the frame. With the help of adapters, postmount brake calipers can also be mounted on IS2000 frames.
€6.95*
This website uses cookies to ensure the best experience possible. More information...
