Tail Light Baby Bee, chrome, LED red* FINALLY: the baby bee as an LED light! flashing or continious light battery change without using tools top quality dimensions: 50 x 35 mm (~1,97 x 1,38 inches) batteries: 2x CR2032 (included) red plactic lens chrome-plated metal housing weight: 20g (~0,04 pounds) Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)

Rearlight Nr. 9 Spanninga Retro LED Battery CP Good looking and best quality Simple, stylish and built for comfort and practicality. The Nr.9 is the tail light you are looking for your modern retro bikes which are becoming one of the most popular bicycle styles around. Blending classic character with just the right accent of modern style, the Nr.9 features all the best of updated LED technologies, offering great visibility for the cyclist and safety for other road users. Using 2 AAA batteries, the Nr 9 has a great lifetime and its low-battery-indicator on the top warns you when the batteries are low Technical specifications: Versions:Xb Light source:1 LED Power source: Battery 2 x AAA Autonomy:> 125h Low battery indicator: Yes Functions: Weight: < 50g (~0,11 pounds) Retro design Integrated reflector Water and shock resistant Width: 43 mm (~1,69 inches) Length: 100 mm (~3,94 inches) red with CP base

Bates style taillight LED red, black matte Retro Style Diameter:~ 58 mm (~2,28 inches) Length over all:~ 64 mm (~2,52 inches) red convex plastic glass in front of LED metal housing with on/off switch comes with 2 batteries (CR2032 H) With swivel-mounted clip Top quality

Bates style taillight LED red, chrome plated Retro Style Diameter:~ 58 mm (~2,28 inches) Length over all:~ 64 mm (~2,52 inches) red convex plastic glass in front of LED metal housing with on/off switch comes with 2 batteries (CR2032 H) Top quality With swivel-mounted clip

Classic Cycle rearlight retro LED battery red with black casing Good looking design and best quality The Classic Cycle Retro is a rear fender with a hip vintage design and LED technology. perates on 4 LR 1130 batteries Equipped with a powerful LED, burn time approx 70 hours, Retro design Material: Plastic Width: 43 mm (~1,69 inches) Length: 100 mm (~3,94 inches) with CP base with red lense

Tail Light, Bullet, black* black, for fender strut mounting, including holder diameter: about 26 mm (~1,02 inches) length: about 44 mm (~1,73 inches) for dynamo Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)

Skull / Deadhead Hazard Light or Bike Light* NEW !!! Black skull / deadhead with white LED eyes NEW !!! to be fixed on the handlebar or seat post integrated switch in nose  crossed bones dimensions: ~ 31 x 30 mm (~1,22 x 1,18 inches) plastic / gum Comes with Battery Articles marked with* are not made for puplic use according to the german StVZO (ONLY important for buyers from GERMANY!!!).

LED rear light DOT by Spanninga Mini size, maxi effect! The DOT rearlight for bicycles is a compact product with a lot of energy. The DOT REAR features a unique 3 dimensional pattern. It offers an optimal solution for quick and affordable safety. The DOT rearlight is a very iconic product on your bicycle.   Light source 1 red LED > 10 Lumens Power source Battery 1 x CR2032 3V Autonomy Max. 30h / 200h (flash) Battery load indicator - Functions On / Flash Weight < 15g   Article is not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)

Apollon Mini LED light set black Front and Rear Discreet and yet conspicous: The Apollon Mini LED light setThe Apollon Mini LED light set has a CNC machined aluminum housing and a high quality, domed lens. This provides a wide light cone so that you are safe on the road in the dark. Number of LED: 1 (red) 1 (white) StVZO Approval: No Features / Specifications: Material: Aluminum (100% CNC machined) Fixing: versatile installation due to snap-fit O-ring attachment Dimming levels: no Flashing modes: flash, and continuous Battery: CR2032 Other: integrated lens switch to toggle We supply: 1 x rear light LED 2 x CR2032 battery 1 x Front light LED 2 x CR2032 battery

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

Rearlight black swiveling For attachment at the frame By turning the light it is activated Settings: Flashing lightbatteries included  

Skull / Hazard Light or Bike Light White * NEW !!! white skull / deadhead with white / coloured LED eyes NEW !!! to be fixed on the handlebar or seat post integrated switch in nose  crossed bones dimensions: ~ 31 x 30 mm (~1,22 x1,81 inches) plastic / gum Comes with Battery 2 functions: flashing white & flashing with changing colours Articles marked with* are not made for puplic use according to the german StVZO (ONLY important for buyers from GERMANY!!!).

Rearlight swiveling black You can switch between parking light, slow flashing or fast flashing Attachment on seat post, frame etc. You can use it without bracket with the clip for your jacket etc. batteries included

LED Reelight Rearlight SL 600 Flashing with Reflector 2,5 LuxThis SL600 rear light is mounted on the seat post. The light is via a small cable connected to the generator. The generator is mounted on the rear fork and the magnets on the spokes. The built-in E-mark reflex and the higher mounting of the light provides increased safety in traffic. Key features: No Batteries flexible mounting wide-angel optics built-in reflector permanently mounted always light on Maintenance-free no friction Contents: 1 rear light 1 generator 2 magnets  1 mounting bracket. Weight: 240 g (~0,53 pounds) The environment can breathe easier with bike lights from Reelight.PRESS RELEASE: The magnet powered bike lights from the Danish company, Reelight, have so far spared the environment from 30 million batteries. The lights contribute to making eco-friendly cycling an easy, safe and secure alternative to the car. Millions of spared batteries + more safe cyclists on the roads = less CO2. The environmental accounts are a little bit greener with the use of Danish company Reelight - s magnet powered and battery-free bike lights, that flash all over the streets and bike lanes. Since Reelight launched the first model in 2005, hundreds of thousands of Danish and foreign cyclists have mounted these pioneering and eco-friendly lights. Reelight are the only bike lights in the world that light up using induction power instead of batteries, and this invention has spared the environment from 30 million batteries so far. Make it easy to choose the bikeThe Danes are one of the nations in the world who use their pedals the most, and this widespread cycling allows both the environment and the population to breathe easier. - It is healthy for the body and the environment to cycle. That is why it is important to develop solutions to make the bicycle an attractive alternative to the car. With Reelight, the cyclists do not need to think about putting their bike lights in their pockets, or that the batteries may run out halfway through the journey. Our lights are permanently fixed and light up in both daylight and in the dark - completely without batteries. So it doesn - t get any easier, says Kenneth Linnebjerg, CEO of Reelight. Secure, safe and freeTraffic Researchers from Aalborg University have conducted a large study in which 2,000 cyclists rode with magnetic lights from Reelight for one year. The cyclists were exposed to 32 percent fewer accidents than a comparable group with ordinary battery lights which only shone in the dark. 85 percent felt "much more" or "more" secure with Reelight on the bike. - Our mission is to improve cyclists' safety while enhancing the sense of security and freedom that cycling should be associated with. We believe that all these elements must be present before more citizens climb out of their cars and onto their bikes - to benefit both the health of the nation and the environment, says Kenneth Linnebjerg. FACT: Three clear benefits for the environment with Reelight:1) No batteriesThe lights use induction power instead of batteries. So far, this has spared the environment from 30 million batteries. Follow the battery counter on reelight.com. 2) Durable materialsHigh quality light diodes and powerful magnets give a unique durability and therefore a long lifetime. This ensures less waste, as there are many years before the lights have to be replaced.3) Safe and secure contribution to more cyclingThere is evidence that the lights increase safety and security - crucial parameters when more people are choosing to take the bike instead of the car. FACT: Did you know... - that you with five kilometres to work can waste half a tonne less CO2 every year by choosing your bike instead of your car -

E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination Good looking design and best quality The E-Bike rear light to mount on frametube or carrier with LED technology. Operates with Julet Mini connectors 2 pins to battery controller Equipped with powerful LEDs Alu casing black matte with red lens and guard Length: 90 mm (~3,54inches) Hight: 59 mm (~2,32 inches) Width: 65 mm without screws (~ 2,56 inches) Cable length ~ 500 mm (~ 16,68 inches)

Busch + Müller LED tail light Toplight Line Small TOPLIGHT Line Small miniaturised LED tail light 12V DC with 2 PIN female Higo plug (red) cable length ~ 28 cm Strip light function LineTec fully automatic parking light function mounting distance 50mm lens colour: red universally applicable StVZO approved, with German test mark (K920)

Busch + Müller rear light µ E for Ebike Small, stylish and bright - The smallest, road-legal rear light. µ [my:], pronounced mü. Minimalist and in a high-quality aluminium housing from the renowned light manufacturer Busch + Müller. The µ is small, efficient and offers very good all-round visibility despite its small size. It is based on 12V voltage and impresses with its filigree, simple design. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Features of the rear light Material: Anodised aluminium housing, plastic Power: < 2W Voltage: 5-15 V Colour: black Diameter (luminaire): 19mm Ø Length: 20mm With German E-mark (not approved for vehicles subject to registration plate requirements) Includes: LED tail light & attachments Please refer to the manual below for further technical details.

LED Reelight Rearlight SL 500 Flashing 2,5 Lux SL500 rear light is mounted on the seat post. The light is via a small cable connected to the generator. The generator is mounted on the rear fork and the magnets on the spokes. Key features: No Batteries flexible mounting wide-angel optics permanently mounted always light on Maintenance-free no friction Contents: 1 rear light 1 generator 2 magnets  1 mounting bracket. Weight: 200 g (~0,44 pounds) The environment can breathe easier with bike lights from Reelight.PRESS RELEASE: The magnet powered bike lights from the Danish company, Reelight, have so far spared the environment from 30 million batteries. The lights contribute to making eco-friendly cycling an easy, safe and secure alternative to the car. Millions of spared batteries + more safe cyclists on the roads = less CO2. The environmental accounts are a little bit greener with the use of Danish company Reelight - s magnet powered and battery-free bike lights, that flash all over the streets and bike lanes. Since Reelight launched the first model in 2005, hundreds of thousands of Danish and foreign cyclists have mounted these pioneering and eco-friendly lights. Reelight are the only bike lights in the world that light up using induction power instead of batteries, and this invention has spared the environment from 30 million batteries so far. Make it easy to choose the bikeThe Danes are one of the nations in the world who use their pedals the most, and this widespread cycling allows both the environment and the population to breathe easier. - It is healthy for the body and the environment to cycle. That is why it is important to develop solutions to make the bicycle an attractive alternative to the car. With Reelight, the cyclists do not need to think about putting their bike lights in their pockets, or that the batteries may run out halfway through the journey. Our lights are permanently fixed and light up in both daylight and in the dark - completely without batteries. So it doesn - t get any easier, says Kenneth Linnebjerg, CEO of Reelight. Secure, safe and freeTraffic Researchers from Aalborg University have conducted a large study in which 2,000 cyclists rode with magnetic lights from Reelight for one year. The cyclists were exposed to 32 percent fewer accidents than a comparable group with ordinary battery lights which only shone in the dark. 85 percent felt "much more" or "more" secure with Reelight on the bike. - Our mission is to improve cyclists' safety while enhancing the sense of security and freedom that cycling should be associated with. We believe that all these elements must be present before more citizens climb out of their cars and onto their bikes - to benefit both the health of the nation and the environment, says Kenneth Linnebjerg. FACT: Three clear benefits for the environment with Reelight:1) No batteriesThe lights use induction power instead of batteries. So far, this has spared the environment from 30 million batteries. Follow the battery counter on reelight.com. 2) Durable materialsHigh quality light diodes and powerful magnets give a unique durability and therefore a long lifetime. This ensures less waste, as there are many years before the lights have to be replaced.3) Safe and secure contribution to more cyclingThere is evidence that the lights increase safety and security - crucial parameters when more people are choosing to take the bike instead of the car. FACT: Did you know... - that you with five kilometres to work can waste half a tonne less CO2 every year by choosing your bike instead of your car -

12V clear rear light with red bright LED, brake and license plate funktion  Mini white lights style 24 clear leds for rear light and brake - glowing red when in function  4 leds for license plate Plastic housing with cables for 12V with E4 and E9  approval Top quality Specs: length: ~ 107 mm hight: ~ 29 mm width: ~ 33 mm distance of screw holes:  95 mm  middle to middle