Outer Cable Housing Black, for Brake 10 cm For Brake Sold by 10 cm (~3,94 inches) 0,49 Euro per 10 cm (~3,94 inches) how to order: 100 cm (~3,94 inches) needed = 10 x 10 cm (~3,94 inches) = please order 10 pieces when 150 cm (~59,05 inches) needed = 15 x 10 cm (~3,94 inches) = please order 15 piecesOuter Diameter: 4,5 mm with black endcap Compatible with all rim or drum brakes also MTB and racing Bikes  

Leather Straps black with chrome-plated buckle for saddle bags or else size: 150 x 10 mm (~5,90 x 0,39 inches)  

Trouser Clips1 pair

Inner Cable Housing for Brakes 2 m (~2,19 yards) made of stainless wire diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches) with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches) ready greased 1 piece

Extension cable for Ebike Technical data: Connector: HIGO / Julet yellow 3PIN male, red 2 PIN female Water resistance: IP65 Cable length: 19,5 cm / 7,67 inches Plug connection: yellow male, red female Outer material: ABS plastic brake sensor adapter General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

Old School Dress Guard / Skirt Protectors, multicoloured, fabric covered Rubber new, one pair, multicoloured: green, yellow, blue, grey, red 30/28 hooks each side for 26 and 28 inch. frames New and fresh production from Europe

Outer Cable Housing Black, for Shifter 10 cm (~3,94 inches) For shifter Sold by 10 cm (~3,94 inches) 0,49 Euro per 10 cm (~3,94 inches) How to order: 100 cm (~3,94 inches) needed = 10 x 10 cm (~3,94 inches) = please order 10 pieces when 150 cm (~59,05 inches) needed = 15 x 10 cm (~3,94 inches) = please order 15 piecesOuter Diameter: 4 mm without endcap Compatible with all inner wire of 1.1 - 1.6 mm (~0,04 - 0,06 inches) including Shimano, XLC Jagwire, ...  

Wheel Cover 26 inch., black black plastic Diameter of the hole in the middle: 56 mm (~2,2 inches) Diamter over all: 540 mm (~21,26 inches) 2 pieces for one 26 inch rim

Holder / bandage 20 mm (~0,79 inches) diameter galvanized for example for drum brakes

Rectangular Rear View Mirror 140 x 60 mm (~5,51 x 2,36 inches), rectangular, with two red reflectors, chrome-plated For lowriders or mod scooters!

High-Quality Universal Clip, Holder can be fixed for example at the fork or frame tube Impact-resistant plastic with anti-slip pads Mounting by means of rotary knob on round or square tube of 10 - 50 mm (~0,39 - 1,97 inches) diameter Mounting point is also rotatable Package included: 1 piece

Stainless steel brake or shift cable clamp for 28.6 mm (~1,12 inches) Clamp for the classic attachment of external trains / Bowden cable Made of stainless steel with screw and nut 1 piece

Outer Cable Housing Silver Plaited Look Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches) *Bling - Bling* For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Reducer / Spacer 25,4 mm (1 inch) to 31,8 mm (~1,25 inches) 80 mm (~3,15 inches) long one piece, alloy Article can be different than picture shows!

Universal Lamp / Headlight Bracket for flat mounting fenders etc. zinc-plated size: about 29 x 14 mm (~1,14 x 0,55 inches)

Outer Cable Housing Chrome 2,50 m x 5 mm (~2,73 yards x 0,2 inches) *Bling - Bling* For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Chrome plated Spring for Vintage Monarch Fork Chrome plated Length: 105 mm (~4,13 inches) width: 37 mm (~1,46 inches) inner minimum width: 15 mm (~0,59 inches) weight: 185 gr. (~0,41 pounds)

Bicycle bottle holder made of aluminum silver Mounts to standard  frame mount  weight: ~ 43 g  ( ~ 1,5 oz) Made in France

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 5,5 cm / 2,16 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

Outer Cable Housing Glittering Pink Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches) *Bling - Bling* For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Old School Dress Guard/ Skirt Protectors, red fabric covered Rubber new, one pair, 30/28 hooks each side for 26 and 28 inch. frames New and fresh production from Europe

Inner Cable Housing for gear shift 2,2 m (~86,61 inches) made of stainless wire diameter: 1,2 mm X 2200 mm (~0,047 x 86,61 inches) with barrel nipple 4 x 4 mm (~0,16 x 0,16 inches) ready greased 1 piece

Art No: 967 Reducer / Spacer 22,2 mm (~0,87 inches) to 25,4 mm (1 inch) one piece, alloy

Old School Dress Guard / Skirt Protectors, black-silver marbled fabric covered Rubber new, one pair, black-silver marbled 30/28 hooks each side for 26 and 28 inch. frames New and fresh production from Europe

Old School Dress Guard / Skirt Protectors, white fabric covered Rubber new, one pair, 30/28 hooks each side for 15 holes in the fender / mudguard for 26 and 28 inch. frames New and fresh production from Europe

Outer Cable Housing White 2,50 m x 5 mm for shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes available in a lot of colours and designs

Old School Dress Guard / Skirt Protectors, brown fabric covered Rubber new, one pair, brown like natural leather 30/28 hooks each side for 26 and 28 inch. frames New and fresh production from Europe

Outer Cable Housing Grey / Black 2,50 m x 5 mm (~2,73 yards x 0,2 inches) For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Braze-on base with M6 threadThread: M6Material: CroMoThe exact dimensions can be found in the product images.

Outer Cable Housing Glittering Red Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches) *Bling - Bling* For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Extension cable for Ebike Technical data: Connector: 5-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 30 cm / 11,81 inches Plug connection: green Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

Racky Baseplate carrier plate Black anodized dimension: 40 x 40 cm (~15,75 inches) alu with universal fitting set

Front light holder Of course, this high-quality lamp holder, from the Greaser series, can also be used for other frames and lamp models. Diameter inside: 3.2 cm (~1,26 inches) Diameter outside: 4 cm (~1,57 inches) Length: 9.2 cm (~3,62 inches) Material: aluminum Color: black with Allen screw 1 piece included in delivery

Outer Cable Housing Blue 2,50 m x 5 mm For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Trouser Slides1 pair

Foot Rests chrome-plated, 1 pair can be also used as passenger foot rests to be fixed on the frame (chain stay) or front fork of the bike the real lowrider stuff! Tube diameter min 24 mm (~0,94 inches) up to max. 30 mm (~1,18 inches)

Weld-in thread / welding socket with 2 mm collar M10Thread: M10Collar: 2 mmMaterial: CroMoThe exact dimensions can be found in the product images.

Wheel Cover 24 inch., black black plastic Diameter of the hole in the middle: 56 mm (~2,2 inches) Diameter over all: 495 mm (~19,49 inches) 2 pieces for one 24 inch rim

Bottle cage adapter 22,2 - 25,4 mm (~0,87 - 1 inch), aluminium for assembling of e.g. a bottle cage at the handlebar, seat post, ..... aluminium turnable 90° for tube diameter 22,2 - 25,4 mm (~0,87 - 1 inch) incl. stainless steel fixing screws usable for all current bottle cages black

GPS Tracker for E-Bikes from IT'S MY BIKE Smart technologies for your bike. E-bikes are expensive and coveted and thus, like all other high-quality bicycles, a popular object of bike thieves. With the IT'S MY BIKE tracking system for e-bikes, this problem solves itself. Once installed, you can use an app to locate your e-bike whenever and wherever you want. The GPS tracker from IT'S MY BIKE can be installed invisibly in the bike and connects your vehicle to the Internet. The position data is recorded via GPS, and the data is transmitted via the new mobile technology for the Internet of Things NB-IoT. This so-called LPWAN technology (Low-Power Wide Area Network) offers many advantages. These include, among other things, a higher range and building penetration than alternative mobile radio standards such as GSM, 3G or LTE while consuming less energy. As a result, the service life of the built-in battery is considerably longer. With the purchase of IT'S MY BIKE Tracker you get 3 years of connectivity, software version 1.1.Connectivity in the following countries: Germany, Switzerland, Austria, UK, Spain, Netherlands, Luxembourg, Italy, France, Denmark and Belgium.A total of four services are currently available in the IT'S MY BIKE app. The theft protection (eProtect) provides support in the event of theft directly via the app when reporting it to the police. The e-bike owner can view the location of his bike on a map. In addition, the IT'S MY BIKE team coordinates between the police and the stolen. The recovery rate is currently 80 percent. In addition to the theft protection, the service also includes an optional digital emergency assistant. This premium service is offered by IT'S MY BIKE together with the companion app WayGuard from Axa. The emergency assistant (eCall) triggers an alarm in the event of a fall or accident. The WayGuard control center is available around the clock and alerts the nearest emergency services in the event of an emergency. The WayGuard service is available in Germany and can be optionally added for a fee and can be canceled on a monthly basis. Users also have the option of taking out suitable insurance packages (eSurance) directly in the app. The specially developed e-bike insurance with GPS protection from partner ALTEOS covers numerous risks, including theft, vandalism, battery wear and accident damage. Finally, ride statistics (eRide) make it possible to call up the ride distance and duration as well as the average speed. E-biker riders can also use average values to calculate how much CO2 they save compared to a car. Mounting instructions:You can install the tracker yourself. Installation instructions and the QR code for activating the tracker are included with the goods. To keep the tracker's internal battery charged, it requires a power supply from the e-bike battery (e.g. from the rear light...).  To prevent the GPS signal from being shielded by the frame, the tracker should be installed with the sticker facing outwards. The GPS antenna is located under the sticker. Ideally, the tracker should be mounted under a plastic cover. Housings made of aluminium, steel and metal alloys can interfere with the connection to the GPS signal. Activation: The tracker is activated by the customer. If the tracker is connected to the continuous current for at least 30 minutes, please scan the QR code of the product in the app.The tracker reacts and should register in the system.

Footrest black M10 thread for 20x4 E-bikes front / rearBlack Do you love to race through the neighborhood and want to share this incredible riding experience with others? Then get some footrests now and take your friends on a bike tour! The footrests are also great for riding with kids who sit in front of the rider! In addition, they protect the shift arm and frame, should the bike fall over. Handmade, solid and simple - The footrests with aluminum alloy are made for's riding with passengers and children and can be mounted quickly and easily, both front and rear. Due to the standardized M10 thread, they also fit other e-bikes and bikes. Note: The footrests can be quickly and easily swapped between front and rear mount, if you increasingly ride with children and other passengers! Features of the footrestsMaterial: alloyed aluminumThread: M10Colors: blackDimensions: L 9.8cm (7.8cm without threaded rod) x D 2cmWeight: 170g Grub screw: Stainless steel 2A unhardened, can be tightened firmlyHandmadeServe as fall over protection for shifting unit and frameAlso fit other e-bikes and bikes with M10 thread1 pair Put your feet up!

Old School Dress Guard / Skirt Protectors, blue fabric covered Rubber new, one pair, 30/28 hooks each side for 26 and 28 inch. frames New and fresh production from Europe

Cable Housing Clip U.C.P inner witdth: 18 mm (~0,71 inches) Vintage for chainstays 1 piece

Sturmey Archer gear cable anchorage for 3 & 5 speed hub gears HSL759 1 piece

Sturmey Archer 13/32 inch Serrated Lock Washer 7.9 mm slot These essential washer incorporate serrations to keep the axle from slipping forward, and also features tabs that keep the axle from rotating in the frame due to pedaling torque. Sturmey Archer 13/32 inch Serrated Lock Washer 7.9mm slot Suitable for older Sturmey Archer 3 Speed and 5 Speed Hubs. HMW155 1 piece

Outer Cable Housing Glittering Gold Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches) *Bling - Bling* For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Outer Cable Housing Checkered Flag Black / Silver 2,50 m x 5 mm (~2,73 yards x 0,2 inches) For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs

Outer Cable Housing Glittering Purple Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches) *Bling - Bling* For shifter or brake cable 1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ... Compatible with all rim or drum brakes also MTB and racing Bikes Available in a lot of colours and designs