Chain 1/2 x 1/8
stainless steel
0,99 € per 10 cm (~3,94 inches)
how to order:100 cm (~39,37 inches) needed = 10 x 10 cm (~3,94 inches) = 10 x 0,99 €, when 150 cm needed (~59,05 inches) = 15 x 10 cm (~3,94 inches) = 15 x 0,99 € including one locking element (shackle) per chain
Chains cut to length on customer order are nonreturnable!
Chain Gold 1/2 x 1/8
1,09 Euro per 10 cm (~3,94 inches)
how to order:
100 cm (~39,37 inches) needed = 10 x 10 cm (~3,94 x 3,94 inches) = 10 x 1,09 €
when 150 cm (~59 inches) needed = 15 x 10 cm (~5,9 x 3,94 inches) = 15 x 1,09 Euro
including one locking element (shackle) per chain
Chains cut to length on customer order are nonreturnable
1/2" to 9/16" Pedal Thread Adaptors
Black, CRO MO
These adaptor bushings have a male 1/2"-20 thread to fit into your one-piece crank, and a standard 9/16"-20 female thread that will let you install standard 9/16" pedals, even modern clipless pedals.
These install with a 15 mm (~0,59 inches) pedal wrench.
Length over all: 32 mm (~1,26 inches)
Brings the pedal 21 mm (~0,83 inches) more out
Weight 54 gr. (~0,12 pounds)/pair
Perfect Quality
9/16 Zoll = 14.28 mm
11/20 Zoll = 14 mm
1/2 Zoll = 12.7 mm
Dished Sprocket, 10 mm (~0,39 inches) offset, 18 Teeth
1/2 x 1/8
helps to bring the chain 10 mm (~0,39 inches) out
Fits to shimano, sachs, sram, stumey archer 3-speed hubs, histop, ... etc.
Depth: ~ 15 mm (~0,59 inches)
inner diameter: 35 mm
Inner Cable Housing for Brakes 2 m (~2,19 yards)
made of stainless wire
diameter: 1,5 mm X 2000 mm (~0,06 x 78,74 inches)
with barrel nipple 7 x 6 mm (~0,27 x 0,24 inches)
ready greased
1 piece
American-to-Euro Conversion kit
These beautifully machined aluminum bushings fit into the shell of a one-piece-crank bottom bracket, and are threaded to accept a:
standard threaded bottom bracket
normal 68 mm (~2,68 inches) width.
3 long CrMo bolts connect the two bushings to one another for a secure mounting.
Alu Hub, Bolt on, black for front wheel for Disc Brake
Sealed bearings
Mounting size: 100 mm (~3,94 inches)
Flange width: 58 mm (~2,28 inches)
Axle Length: 155 mm (~6,10 inches)
Pitch Circle Diameter: 58 mm (~2,28 inches)
Spoke Holes: 36 Holes 14G = 2 mm (~0,08 inches) Spokes
Weight: ~ 335g (~0,73 pounds)
with black bolts
Bolt on. NO quick release!!
Stickshifter for Shimano 3 speed
Solid stickshifter made of partial polished steel with black nicely moulded plastic knob
complete length: 14,5 cm
width of mount: 6,3 cm
speeds snap into place
mounts with two wholes for frame assembling
This gear lever was previously imported and distributed by The Chopperdome of 1055 LZ Amsterdam, Admiraal de Ruijterweg 346.
Block Pedals 9/16 without Reflector Big Diamond Cut*
chrome-plated for bikes and motorbikes, 9/16 inch thread, pair with big diamond cut
The blocks are 98 mm (~3,86 iches) long
articles marked with* are not made for public use according to the german StVZO
(ONLY important for buyers from GERMANY!!!)
Stainless steel brake or shift cable clamp for 25.4 mm (~1 inch)
Clamp for the classic attachment of external trains / Bowden cable
Made of stainless steel with screw and nut
1 piece
Offset Chain Ring Classic Cycle
1 cm (~0,69 inches) Offset
cool offset chain wheel for "one piece crank"
For Chains of 1/2 x 1/8
Helps to bring the chain 1 cm (~0,69 inches) off the line not to touch the tire
Diameter of the bolt circle is of standard 130 mm (~5,12 inches)
Thompson bottom bracket
Wedge bottom bracket
with cones, shells (40 mm (~1,57 inches)), ball rings, wedge axis 148 mm (~5,82 inches)
15.8 mm (~0,62 inches) diameter
The frame width / bottom bracket sleeve can be between 70 and 80 mm (~2,75 and 3,15 inches).
Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth black
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Bottom Bracket Bearing Kit
for One Piece Cranks black
complete bottom bearing kit for one piece cranks
the internal diameter of the bearing shell for the BB lug is: 51,5 mm (~2,03 inches)
Halflink Chain 1/2 x 1/8
silver
116 chain links = 148 cm (~58,27 inches)
No need to change frame and freewheel. The special design oh chain plate, bridge-type roller link is composed of height-uneven chain plates.
We jumpoff the traditional way of chain lenth adjustment from the past, by adjusting pair of links, avoid the difficulty of wasting and unprecise adjustment.
The chain adopts the SCM alloy steel, pass the special DHA heat treament.
Its intention power is up to 1300 kgf, o lot higher strength than general roller chain which have 850 kgf.
Totally accords ISO and JIS industrial standard.
The straight shape design of outside chain plate offers the ability of freestyle bicycle to use the roller chain to collide against any object.
Smooth going instead of beating have more comfortable and safer Assurance to ride persons who take advantage of it.
delivery on headcard
Halflink Chain 1/2 x 1/8
black Teflon painted
116 chain links = 148 cm (~58,27 inches)
No need to change frame and freewheel. The special design oh chain plate, bridge-type roller link is composed of height-uneven chain plates.
We jumpoff the traditional way of chain lenth adjustment from the past, by adjusting pair of links, avoid the difficulty of wasting and unprecise adjustment.
The chain adopts the SCM alloy steel, pass the special DHA heat treament.
Its intention power is up to 1300 kgf, o lot higher strength than general roller chain which have 850 kgf.
Totally accords ISO and JIS industrial standard.
The straight shape design of outside chain plate offers the ability of freestyle bicycle to use the roller chain to collide against any object.
Smooth going instead of beating have more comfortable and safer Assurance to ride persons who take advantage of it.
delivery on headcard
Chain tensioner Alu 10 mm axle
for 3/8"
niro alloy
Dimensionen:
axle: 10 mm (~0,39 inches)
Head width: 26 mm (~1,02 inches)
Total Leght: 51 mm (~2 inches)
Distance between mid of axle position till stop / position of screws : 13 mm (~0,51 inches)
Screw: 32 mm (~1,26 inches) long, M4
1 Piece
Alu Hub, Bolt on, silver for front wheel for Disc Brake
Sealed bearings
Mounting size: 100 mm (~3,94 inches)
Flange width: 58 mm (~2,28 inches)
Axle Length: 155 mm (~6,10 inches)
Pitch Circle Diameter: 58 mm (~2,28 inches)
Spoke Holes: 36 Holes 14G = 2 mm (~0,08 inches) Spokes
Weight: ~ 335 g (~0,73 pounds)
Bolt on. NO quick release!!
Bottom Bracket Bearing Kit
for One Piece Cranks
complete bottom bearing kit for one piece cranks
silver
the internal diameter of the bearing shell for the BB lug is: 51,5 mm (~2,03 inches)
Halflink Chain 1/2 x 1/8
GOLD Teflon painted
116 chain links = 148 cm (~58,27 inches)
No need to change frame and freewheel. The special design oh chain plate, bridge-type roller link is composed of height-uneven chain plates.
We jumpoff the traditional way of chain lenth adjustment from the past, by adjusting pair of links, avoid the difficulty of wasting and unprecise adjustment.
The chain adopts the SCM alloy steel, pass the special DHA heat treament.
Its intention power is up to 1300 kgf, o lot higher strength than general roller chain which have 850 kgf.
Totally accords ISO and JIS industrial standard.
The straight shape design of outside chain plate offers the ability of freestyle bicycle to use the roller chain to collide against any object.
Smooth going instead of beating have more comfortable and safer Assurance to ride persons who take advantage of it.
delivery on headcard
Stainless steel brake or shift cable clamp for 31.8 mm (~1,25 inches)
Clamp for the classic attachment of external trains / Bowden cable
Made of stainless steel with screw and nut
1 piece
Outer Cable Housing Silver Plaited Look Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Iron / Maltese Cross Pedals
Black, Aluminium
9/16 inch thread, pair
Screwed pins
Sealed bearing
CroMo Axle
Weight 480 gr. (~1,06 pounds)/pair
Perfect Quality
Please note: Item is also available with 1/2 inch thread. Please check which size you need.
For your information:
1/2 inch ~ 12.7 mm - for one-piece crank
9/16 inch ~ 14.3 mm - for three-piece crank
3 - Speed - Coaster - Hub SHIMANO Nexus SG-3C41
Revo-shift with 2000 mm (~78,74 inches) cable and clickbox
hub with 36 spokeholes
comes with dustcaps, nuts, washers etc.
with 19 teeth sprocket
axle length: 168 mm (~6,61 inches)
installation dimension: 120 mm (~4,72 inches)
Flange Width: 54.7 mm (~2,15 inches)
Pitch Circle Diameter: 58,8 mm (~2,15 inches)
Distance Flange - Center: 27,5 mm (~1,08 inches)
Lowrider Pedals, twisted, Chrome plated
1/2 inch thread, CP, one pair
Please note: Item is also available with 9/16 inch thread. Please check which size you need.
For your information:
1/2 inch ~ 12.7 mm - for one-piece crank
9/16 inches ~ 14.3 mm - for three-piece crank
articles marked with* are not made for public use according to the german StVZO (ONLY important for buyers from GERMANY!!!)
UD Pedals Alu Urban Drivestyle 9/16 with reflectors,black
Details:
Thread: 9/16 inch
Design: Platform pedal
Material: Sturdy pedal body made of Alu
Axle: Boron steel
Colour: black
Weight: ~ 475 g
Platform dimensions: 100 x 120 x 25 mm
With StVZO approved reflectors K~1155
1 pair of pedals
Urban Drivestyle Branding
Original accessories for Bikes from Urban Drivestyle Berlin!
9/16" to 1/2" Pedal Thread Adaptors
Black, CRO MO
These adaptor bushings have a male 9/16"-20 thread to fit into your BSA crank, and a standard 1/2"-20 female thread that will let you install standard 1/2" pedals.
These install with a 15 mm (~0,59 inches) pedal wrench.
Length over all 32 mm (~1,26 inches)
Brings the pedal 21 mm (~0,83 inches) more out
Weight 54 gr. (~0,12 pounds) /pair
Perfect Quality
9/16 Zoll = 14.28 mm
11/20 Zoll = 14 mm
1/2 Zoll = 12.7 mm
Inner Cable Housing for gear shift 2,2 m (~86,61 inches)
made of stainless wire
diameter: 1,2 mm X 2200 mm (~0,047 x 86,61 inches)
with barrel nipple 4 x 4 mm (~0,16 x 0,16 inches)
ready greased
1 piece
Block Pedals without Reflector with fine cut*
chrome-plated for bikes and motorbikes, 9/16 inch thread, pair with fine diamond cut
The blocks are 98 mm (~3,86 inches) long
Delivery: 1 pair
Articles marked with* are not made for public use according to the german StVZO (ONLY important for buyers from GERMANY!!!).
Union - Pedals, rounded, with Reflector, brown9/16 inch thread, chrome-plated, chrome axle, pairarticles made for public use according to the german StVZO
Fat Bike Cartrige B.B. Set for 100mm housing
silver
for 100 mm bottom bracket housing
total length (L1): 159,50 mm (~6,28 inches)
L2: 25,5 mm (~1 inch)
430 gr.
BSA, JIS
sealed bearings
Dacromet coated axle
compatible with Shimano tools
Crankset Classic 46 Teeth with cotterpins
with cotterpins, chrome-plated, 46 T, crank 170 mm (~6,69 inch)
for 9/16 threaded pedals
with cones, shells (40 mm (~1,57 inches)), ball rings, wedge axis 148 mm (~5,82 inches)
15.8 mm (~0,62 inches) diameter
The frame shell width / bottom bracket sleeve can be between 70 and 80 mm (~2,75 and 3,15 inches).
Fat Bike Cartridge B.B. Set for 120mm housing
black
for 120 mm bottom bracket housing
total length (L1): 180 mm (~7,08 inches)
L2: 32 mm (~1,26 inch)
~ 400 gr.
BSA, JIS
sealed bearings
compatible with Shimano tools
Lowrider Pedals, twisted, Chrome plated 9/16
9/16 inch thread, CP, one pair
Please note: Item is also available with 1/2 inch thread. Please check which size you need.
For your information:
1/2 inch ~ 12.7 mm - for one-piece crank
9/16 inch ~ 14.3 mm - for three-piece crank
articles marked with* are not made for public use according to the german StVZO (ONLY important for buyers from GERMANY!!!)
Outer Cable Housing Glittering Red Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Chain Adjuster for single speed, fixies, BMX, ...
aluminium
arm length: 68 mm (~2,68 inches)
Weight: 110 gr. (~0,24 pounds)
To assemble it a cantilever pivot is needed.
Thread of the mounting screw: M10 x 1,0
€19.95*
This website uses cookies to ensure the best experience possible. More information...