Headlight Bracket for fork crown
steel
black
very strong: 3 mm (~0,12 inches) thick
Hole diameter for lamp: ~ 9,4 mm (~0,37 inches)
Oblong hole: 15 x 6 mm (~0,59 x 0,24 inches)
Length/width: ~ 50 mm
Oblong holes hight: ~ 6,2 middle to middle of oblong holes: ~ 19,5 mm
With this item you might be able to mount the heavy motobike lamps o the fork crowns
1 piece
Front light holder
Of course, this high-quality lamp holder, from the Greaser series, can also be used for other frames and lamp models.
Diameter inside: 3.2 cm (~1,26 inches)
Diameter outside: 4 cm (~1,57 inches)
Length: 9.2 cm (~3,62 inches)
Material: aluminum
Color: black
with Allen screw
1 piece included in delivery
Headlight Bracket for Handlebar Stem 1 1/8
Very nice UCP finish
for 28,6 mm (~1,12 inches) handlebar stems or shafts or else
Length: about 97 mm (~3,82 inches)
Headlight Bracket for fork crown
steel
chrome plated
very strong: 3 mm (~0,12 inches) thick
Hole diameter for lamp: ~ 9,4 mm (~0,37 inches)
Oblong hole: 15 x 6 mm (~0,59 x 0,24 inches)
diameter holes : ~ 9,5 mm
Length/width: ~ 50 mm
Oblong holes hight: ~ 6,2 middle to middle of oblong holes: ~ 19,5 mm
With this item you might be able to mount the heavy motobike lamps o the fork crowns
1 piece
Universal holder angle for lamp or fender, steel, black
Holder at 90° angle
leg length ~ 34 mm and ~ 20 mm
hole diameter ~ 6 mm
Material: steel
Black anodized
Skull / Deadhead Hazard Light or Bike Light*
NEW !!! Black skull / deadhead with white LED eyes NEW !!!
to be fixed on the handlebar or seat post
integrated switch in nose
crossed bones
dimensions: ~ 31 x 30 mm (~1,22 x 1,18 inches)
plastic / gum
Comes with Battery
Articles marked with* are not made for puplic use according to the german StVZO (ONLY important for buyers from GERMANY!!!).
H7 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H7 LED
Standard H7 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
Stainless Headlight Bracket for Handlebar Stem 1 1/8 inch
for 28,6 mm (~1,23 inches) stems
stainless steel
Length: about 70 mm (2,76 inches)
With stainless screws!
Alu Front light holder / clip Outsider
Of course, this high-quality lamp holder, from the Outsider series, can also be used for other frames and lamp models.
Diameter inside: ~ 3.4 cm (~1,34 inches)
Diameter outside: ~ 4,15 cm (~1,63 inches)
Length: ~10,3 cm (~4,05 inches)
Material: aluminum
Color: black
with Allen screw
1 piece included in delivery
BR02 universal holder for lamp or mudguard / fender
90 ° angle with 3 holes
Leg length ~ 35 mm / 1,34 inch and ~ 26 mm /1,02 inch
Hole diameter ~ 5 mm / 0,2 inch and 8,5 mm /0,334 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
H4 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H7 LED
Standard H7 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
UD holder for lamps, brakes etc.
This high-quality holder can be installed on forks or handlebars of the corresponding diameter and is used to attach lamps or brakes, for example.
Inner diameter: ~ 33 mm
Length: ~ 63 mm
Bore with thread: ~ 10 mm
Material: steel
Colour: black
With Allen screw for fixing.
For mounting e.g. lamps, brakes etc. on the fork or handlebar.
Scope of delivery: 1 piece
This holder was used by Urban Drivestyle Berlin on their bikes.
Mirror Mount CNC 22mm/ M10 right-hand thread - black
Quality mirror clip for hanlde bars form VICMA
Diameter inside: ~ 22 mm
Tread: M10
Material: aluminum
Color: black
with 2 Allen screws
1 piece included in delivery
BR01 universal holder for lamp or mudguard / fender
90 ° angle with a slightly cranked leg.
Leg length ~ 35 mm / 1,34 inch
Hole diameter ~ 5 mm / 0,2 inch
Distance from the center of the hole to the center of the hole , cranked leg ~ 22 mm / 0,86 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
Lamp holder for front headlights, black
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: Black
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
Universal holder angle for lamp or fender, stainless steel
Holder at 90° angle
leg length ~ 23 mm and ~ 15 mm
hole diameter ~ 10 mm and ~ 6 mm
Material: stainless steel
Universal switch for handlebar mounting
With this small and space-saving switch, various electrical components and power can be conveniently switched on from the handlebar. The switch controls connected components like an on/off button: pressing the button engages the switch and activates the connection. Pressing the button again interrupts the contact. This makes the switch particularly suitable for longer-term activation.
The switch fits all handlebars with a diameter of 22.2mm / 0.874 inches.
Cable length: approx. 140 cm / 55.11 inches
Universal Switch, Horn, Run - Stop, Kill Switch
switch squared for speed pedalec, engine stop, horn or e.g. override - Quad / ATV
with waterresistant rubber frame
Size of switch: ~ 27 x 27 mm
Length of cable: ~ 700 mm
UD holder for lights, brakes etc.This high-quality bracket can be fitted to handlebars or tubes with a diameter of 22.2 mm and is used to attach lights or brakes, for example.Inner diameter: ~ 22.2 mmDistance between the mounting brackets (measured internally): ~15 mmTotal length: ~ 50 mmMaterial: steel and plasticColour: blackFor mounting e.g. lights or brakes on the handlebars.Scope of delivery: 1 pieceThis bracket was installed by Urban Drivestyle Berlin on their bikes.
Lamp holder for front headlights, white
The holders are made of chromoly steel and are available in black and white.
CHARACTERISTICS OF THE LAMP HOLDERS
Material: Chromoly steel
Colour: White
Compatibility: UNI MK, Swing & Bobber V3 and above
Includes: 2x holder
Original lamp holder for the 7 inch front headlight from Urban Drivestyle!
€14.95*
This website uses cookies to ensure the best experience possible. More information...
