Washer to fix on axle
Washer made out uf steel with UCP finish to fix under the axle nut to offer a assembling point for fenderstays or something else.
Big Hole: 9 mm (~0,35 inches)
Small hole: 5,6 mm (~0,22 inches)
Perhaps you need to open up the bigger hole for another 1 mm (~0,04 inches) to fix it on rear axles.
1 Piece
Total length: ~ 4 cm / ~ 1,575 inch
Wheel Cover 26 inch., black
black plastic
Diameter of the hole in the middle: 56 mm (~2,2 inches)
Diamter over all: 540 mm (~21,26 inches)
2 pieces for one 26 inch rim
High-Quality Universal Clip, Holder
can be fixed for example at the fork or frame tube
Impact-resistant plastic with anti-slip pads
Mounting by means of rotary knob on round or square tube of 10 - 50 mm (~0,39 - 1,97 inches) diameter
Mounting point is also rotatable
Package included: 1 piece
Universal Fender clip
fits up to ~ 70 mm (~2,76 inches) fender width
Length: 12 cm (~4,72 inches)
Width: 2.5 cm (0,98 inches)
Height: 2.5 cm (~0,98 inches)
easy to mount for front or rear fender
Universal holder angle for lamp or fender, steel, black
Holder at 90° angle
leg length ~ 34 mm and ~ 20 mm
hole diameter ~ 6 mm
Material: steel
Black anodized
BR02 universal holder for lamp or mudguard / fender
90 ° angle with 3 holes
Leg length ~ 35 mm / 1,34 inch and ~ 26 mm /1,02 inch
Hole diameter ~ 5 mm / 0,2 inch and 8,5 mm /0,334 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
Fender Stays, 26 inch.
stainless steel one piece
for 80 mm (~3,15 inches) wide fenders
for axle mounting and 80 mm wide platesOverall length: approx. 370 mmmSlot for axle: ~15 x 10 mmMounting holes to mudguard: ~ 5 mm / slotted hole: ~ 20 x 5 mmDistance from axle mount centre to mounting hole to mudguard: ~ 355 mm
Stainless Steel Fender Slide
polished steel, partly made out of stainless steel
with 2 threads, washers and nuts
rounded
for the authentic nostalgia look!
Dimensions: ~ 127 x 38 mm (~5 x 1,5 inches)
polished steel partly made out of stainless steelwith 2 threads, washers and nutscorneredfor the authentic nostalgia look!Dimensions: ~ 120 x 40 mm (~4,72 x 1,57 inches)
BR01 universal holder for lamp or mudguard / fender
90 ° angle with a slightly cranked leg.
Leg length ~ 35 mm / 1,34 inch
Hole diameter ~ 5 mm / 0,2 inch
Distance from the center of the hole to the center of the hole , cranked leg ~ 22 mm / 0,86 inch
Distance from the center of the hole to the center of the hole, straight leg ~ 20 mm / 0,78 inch
Material: stainless steel
The holder can be used to attach lamps or to attach fender stays.
It is also suitable for the Spanninga lamp No. 9 (# 4475000).
Fender Ornament Tiger Puppy
Quality Made in Germany by Bullyland
about 50 mm (~1,97 inches) high figure for fender mounting
(screw not included)
BULLY 63579 Tiger-Junges, braun
Universal holder angle for lamp or fender, stainless steel
Holder at 90° angle
leg length ~ 23 mm and ~ 15 mm
hole diameter ~ 10 mm and ~ 6 mm
Material: stainless steel
UD bolt accessory set for mudguards
Suitable for mounting mudguards with overflow brace!
The screw set was originally used to attach the Urban Drivestye mudguards 20x4 inch for UNI Fatbike, but can also be used for other models.
Fender Stays 55-60 mm (~2,16 - 2,36 inches) wide
Chrome plated
one piece
for 55-60 mm (~2,16 - 2,36 inches) wide fenders
Total length: 380 mm (~14,96 inches)
Ø 4,5 mm (~0,18 inches)
Fender Stays 45-50 mm (~1,77 - 1,97 inches) for wide Fenders
Chrome plated
one piece
for 45-50 mm (~1,77 - 1,97 inches) wide fenders
Total length: 370 mm (~14,57 inches)
Fender Stays 55-60 mm (~2,16 - 2,36 inches) wide
Chrome plated
one piece
for 55-60 mm (~2,16 - 2,36 inches) wide fenders
Total length: 370 mm (~14,57 inches)
Ø 4 mm (0,16 inches)
Urban Drivestyle fender strut set for 20 inch fatbike
Mudguard struts, overflowing (2 pieces)
bolts and bracket set
for 20 x 4 inch
Material thickness: ~ 4 mm
Inner width: ~ 135 mm
Length of straight strut - measured vertically from apex to center mounting hole: ~ 300 mm - mounting holes oblong hole: ~ 13 x 7 mm
Length of the cranked strut - measured vertically from the apex to the center of the mounting hole: ~ 290 mm Mounting holes ~ 6 mm
Original accessories Urban Drivestyle for e.g. the Moke, Swing or Bobber
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note dimensions
Universal Fender clip stainless 40 mm
fits up to ~ 40 mm fender width
Length: ~ 46 mm
Width: ~ 29 mm
Height: ~ 20 mm
easy to mount for front or rear fender
Urban Drivestyle mudguard stay for 20 inch fatbike
Mudguard strut, overflowing (1 piece)
Bolts, screws and bracket set
for 20 x 4 inch
Material thickness: ~ 4 mm / 0,157 inches
Inner width: ~ 135 mm / 5,35 inches
Length of straight strut - measured vertically from apex to centre of mounting hole: ~ 280 mm / 11,02 inches - Mounting holes Ø: ~ 6 mm / 0,24 inches.
Original accessories Urban Drivestyle! The strut was used as an additional mounting for the Uni Boost mudguard.
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note the dimensions!
Urban Drivestyle mudguard stay for 20 inch fatbike
Mudguard strut, overflowing (1 piece)
for 20 x 4 inch
Material thickness: ~ 4 mm / 0,157 inches
Inner width: ~ 135 mm / 5,35 inches
Length of straight strut - measured vertically from apex to centre of mounting hole: ~ 280 mm / 11,02 inches - Mounting holes Ø: ~ 6 mm / 0,24 inches.
Original accessories Urban Drivestyle! The strut was used as an additional mounting for the Uni Boost mudguard.
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note the dimensions!
UDX Mudguard Brace for 20 inch Black
Mudguard band brace (1 piece)
for 20 inch, black
Material thickness: ~ 3 mm
Inner width: ~ 113 mm
Length over all: ~ 200 mm
Mounting holes oblong hole: ~ 11.5 x 5.5 mm
2 threaded holes M4 in the apex
Original accessories Urban Drivestyle for the UDX
Fender Stays Wave
The stay for your cruiser!
You can mount two pieces on one side (see picture) or use one piece only for one side.
Fit for the articles with the numbers: 220x, 221, 222, 223x, 224, 243, 244, 519, 1223, 385204
Color: Silver anodized
Material: Aluminum
Includes: 1 pair
Without mounting material!
Distance between the axle mount and the mounting hole for the mudguard: ~ 35 cm / 13,78 inch
Distance between mounting holes mudguards: ~ 9.5 cm / 3,74 inch
Urban Drivestyle mudguard stay cranked for 20 inch fatbike
Mudguard strut, overflowing (1 piece)
for 20 x 4 inch
Material thickness: ~ 4 mm / 0,157 inches
Inner width: ~ 135 mm / 5,35 inches
Length of cranked strut - measured vertically from apex to centre of mounting hole: ~ 290 mm / 11,41 inches - Mounting holes Ø: ~ 6 mm / 0,24 inches.
Original accessories Urban Drivestyle! The strut was used as an additional mounting for the Uni Boost mudguard.
Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note the dimensions!
Fender Stays 45-50 mm (~1,77 - 1,97 inches) wide
Chrome plated
one piece
for 45-50 mm (~1,77 - 1,97 inches) wide fenders
Total length: 345 mm (~13,58 inches)
Ø 4 mm (~0,16 inches)
Universal Fender clip stainless 124 mm
fits up to ~ 140 mm fender width
Length: ~ 142 mm
Width: ~ 25 mm
Height: ~ 28 mm
easy to mount for front or rear fender
Universal mudguard set 20 - 29 inch
Color: black
Material: plastic
Max. Width: ~ 75 mm
Length rear mudguard: 325 mm long
Length front mudguard in front of front fork: ~ 155 mm long
Length front mudguard behind the front fork: ~ 255 mm long.
With mounting hardware as shown.
Fits ~ 24 - 29 " bikes
€9.95*
€14.95*(33.44% saved)
This website uses cookies to ensure the best experience possible. More information...
