Metal - Valve - Cap with Chain
1 piece
Dustcap and chain nickel-plated.
For the real oldtimer look on your bicycle.
Only for dunlop (DV) valves, not for car- or motorbike-valves!
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 80 mm (~3,15 inches)
Thick: 1,1 mm (~0,043 inches)
Length: 2350 mm (~ 92,52 inches)
~ 255 g ( ~ 0,56 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
Streetking Whitewall Balloon Tire
26 x 2.125
57 - 559
nostalgia whitewall tire for the ultimate old school look!
width of inflated tire: 55 mm (~2,16 inches)
This tire fits on all 26" Classic Cycle rims up to 75 mm (~2,95 inches) width!
But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 16 PS. It could blast.
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 100 mm (~3,94 inches)
Thick: 1,3 mm (~0,051 inches)
Length: 2350 mm (~ 92,52 inches)
~ 400 g (~ 0,88 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
beige cream roadster Tire
700 x 35 B
colour: beige cream
Very stable quality with vintage block-profile.
40-635: Please check out the exact diameter of the rim! There are also existing 622 mm (~24,49 inches) rims.
ClincherWeight: ~ 770 g (~1,7 pounds)1 piece
Street Hog III Extra Wide Tire 20 x 4 1/4
Diameter: 406
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 80 mm (~3,15 inches) rim the tire is about 93 mm (~3,66 inches) wide and it will 70 mm (~2,75 inches) protrude over the rim.
Depending on the rim width and the air pressure, the tire has a total diameter of approx. 60 cm.
30TPI
Weight: ~ 1,67 kg (~3,68 pounds)
External Diameter of Street Hog III 20 x 4 1/4 on 82 mm (~3,23 inches) rim is ~560 mm (~22,05 inches) - May vary because of pressure.
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
"E-Huntsman 20 x 4.0 inch tyre"
20" fatbike tyre specially developed for e-bikes!The E-Huntsman promises high riding comfort on the road as well as on loose off-road surfaces.The override technology guarantees increased puncture protection.For customs or chopper bikes like the Schwinn New Stingray, UNI MK, Super 73, Mate X, Mario and many more!This tyre fits CLASSIC CYCLE 20" rims from approx. 50 mm width! However, please note clearance in frame and/or fork!
Dimensions / Details:
ETRTO: 102 x 406
Max: 36 PSI / 2,5 Bar / 250 kPa
Over Ride E-Bike ready 50
Material: EndC - Endurance Compound
Mounted on an 82 rim, the tyre is approx. 10 cm / 3,93 inches wide and protrudes ~ 9 cm / 3,54 inches above the rim edge.
Total diameter: 60 cm / 23,62 inches
Offered is a tyre without rim.
Weight: ~ 2250 g / ~ 4,96 lbs.
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 75-100 x 406 / 20" x 3.3 - 4.0
*Tube - 60 - 100 x 406 / 20 x 2.4 - 3.5
Rim - 50 - 102 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 350 g
scope of delivery: 1 piece
*Attention: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 2.5 - 3.5 is recommended.
Thick Brick 24 x 3.0 Whitewall (75-507)
THE ultra fat custom tire !!!
The ultimate custom cruiser and lowrider tire for maximum show performance!
Compatible with :
Classic Cycle rims - 24" 30 - 82 mm wide
Specifications:
ETRTO: 75 - 507
Width of the inflated tire: ~ 75 mm
Mounted on an 82 mm wide rim, the tire is approximately 87 mm wide.
Total diameter of the tire mounted on a 82 mm wide rim: ~ 665 mm
Weight: ~ 1.3 kg
Height: Thick Brick tire is built approximately 66 mm above the rim edge
Pressure: 30 - 40 PSI / 2.1 - 2.8 bar
Please check the spacing to the frame and/or fork
We recommend not to inflate the tire above 30 PSI / 2.0 bar for rims that are too wide, otherwise the sidewall thread may tear.
Scope of delivery: 1 piece
204 Kenda Krusade Extra Wide Tire 20 x 4
Diameter: 406
98 - 406
Ideal for the 20 inch fat e-bikes!
This tire fits on all 20" Classic Cycle rims wider than 67 mm (~2,64 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,22 inches) rim the tire is about 95 mm (~3,74 inches) wide and it will 79 mm (~3,11 inches) protrude over the rim.
Diameter over all on this rim: 580 mm (22,83 inches)
60 TPI
5-30 PSI / 0,4 -2.1 bar / 40 - 210 KPA
Weight: ~ 990 g (~ 2,18258 pounds)
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
This offer includes 1 piece only
Fat Bike Tire Classic Cycle Zig Zag 26 x 4.0 whitewall
97/102-559
72 TPI = Lightweight and strong!
max load = 155kg/pc
About 87 mm (~4,25 inches) wide on a 80 mm (~3,15 inches) rim.
About 107 mm (~4,21 inches) wide on a 100 mm (~3,94 inches) rim.
This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance!
The pictures shows the new Zig Zag Tire assembled on a 132 mm (~5,2 inches) wide rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/- 0,79 inches) concerning to pressure and rim diameter.
Weight: 1890 g (~4,17 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 piece
Tube recommendation: For rim widths up to 102 mm (~4 inches): 26 x 4.0 tube. For wider rims: till 26 x 5.0 tube
Notice:
The white sidewall has a very slight bluish tinge.The bluish part is to prevent yellowing.
Valve Caps Crown, chrome
1 pair, chrome-plated, fits on all standard auto / car / motorcycle valves
The ultimate custom hot rod look for Your bike!
Trik Topz
Very cool and beautiful tyre made of well-known and high quality production. Mounted on our 82 mm (~3,23 inches) wide rims. Total diameter mounted depending on pressure and rim width: ~ 705 mm (~27,75 inches)
70-559
100-250 kpa
1.0-2.5. Bar
15-36 PSI
1.35 kg (~2,98 pounds)
Streetking Whitewall Balloon Tire
20 x 2.125
nostalgia whitewall tire for the ultimate old school look!
This tire fits on all 20" Classic Cycle rims up to 65 mm width!
But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 16 PSI
Tire Street Hog 20 x 3.0 white wall
76-406
Semi Slick
Thick and strong tyre for up to 40 PSI / 2,75 Bar pressure.
This tyre fits all CLASSIC CYCLE 20" rims up to approx. 82 mm / 3.2 inches width!
Weight: ~ 1280 g / 2,82 lbs
Mounted on a 67 mm / 2.6 inches wide rim, the tyre has approximately the following dimensions:
It protrudes ~ 65 mm / 2.5 inches over the rim edge, is ~ 79 mm / 3.1 inches wide and has an overall diameter of ~ 550 mm / 21,65 inches.
1 piece
Tire Street Hog 20 x 3.0 pure black
76-406
Semi Slick
Thick and strong tyre for up to 40 PSI / 2,75 Bar pressure.
This tyre fits all CLASSIC CYCLE 20" rims up to approx. 82 mm / 3.2 inches width!
Mounted on a 67 mm / 2.6 inches wide rim, the tyre has approximately the following dimensions:
It protrudes ~ 65 mm / 2.5 inches over the rim edge, is ~ 79 mm / 3.1 inches wide and has an overall diameter of ~ 550 mm / 21,65 inches.
1 piece
Tire Kenda Kraze 20 x 4 1/4
97-406
THE ultra fat custom tire with oldschool tread
The ultimate custom cruiser tire for maximum performance!
On 82 mm (~3,23 inches) rim as shown it is 98 mm (~ 3,86 inches) wide and 61 mm (~ 2,4 inches) high (above the rim).
This tire fits rims of widths 67 mm (~2,64 inces) to 102 mm (~4,02 inches) width!
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
But please check frame/fork for clearance!
Weight: 1430 g (~ 3,15 pounds)
30 TPI
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 100 -120 x 406 / 20" x 4.0 - 4.8
*Tube - 90 - 120 x 406 / 20 x 3.0- 4.0
Rim - 65 - 140 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 360 g
scope of delivery: 1 piece
*Please note: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 3.0 - 3.75 is recommended.
From our list the Kenda Kraze 20 x 4.0 won't fit. It is not bollooning enaugh.
Vintage tires 28 x 1 1/2 40 - 635 blackwithout Cold Patch branding700 x 35 B40-635: Please note the exact diameter of your rim.There are also 28er rims with 622 mm (~24,49 inches) diameterTire color: blackVery stable quality with historical block profileClincherUp to 55 PSi air pressure1 piece
Street Hog III Monster Tire 24 x 4 1/4 pure black
for custom and chopper bikes
Inflate to 30 P.S.I.
Overall diameter on a 100 mm (~3,94 inches) rim: ~ 655 mm (~25,79 inches)
Overall diameter on a 80 mm (~3,15 inches) rim: ~ 665 mm (~25,79 inches)
On a 100 mm (~3,94 inches) rim the tire is about 103 mm (~4,05 inches) wide.
On a 80 mm (~3,15 inches) rim the tire is about 93 mm (~3,63 inches) wide.
Overall diameter, depending on rim width and air pressure about: 66 cm (~25,98 inches) + / - 2 cm (~0,79 inches).
ETRTO:108 - 507
Weight: 1,95 kg ( ~4,30 pounds)
This tire fits on all 24" Classic Cycle rims wider than 50 mm till 132 mm rims. But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
Classic Cycle Tire black with white wall
28 x 1 1/2 40 x 635 700 x 38 B
colour: black with white sides
Very stable quality with vintage block / brick-profile.
Max Load : 150 kg (~330,69 pounds)
Inflate to 50 psi
40-635 Please check out the exact diameter of the rim. There are also existing 622 mm (~24,49 inches) rims.
Tire Street Hog 26 x 2.35, black white wall without black lettering
Semi Slick Tire
thick and strong!
the ultimate nostalgia custom cruiser hot rod tire!
40-65 PSI
about 65 mm wide on a 56 mm rim
about 57 mm wide on a 39 mm rim
Overall diameter, depending on rim width and air pressure about: 65 cm + / - 2 cm Weight: 1.15 kg
This tire fits on all 26" Classic Cycle rims up to 67 mm width!
But please check frame/fork for clearance!
Please be aware that
If you assemble the tire on wide rims not to put more pressure than 20 PSI
Street Hog III Whitewall Tire 24 x 4 1/4
for custom and chopper bikes
Inflate to 30 P.S.I.
Overall diameter on a 102 mm (~4,01 inches) rim: ~ 655 mm (~25,79 inches).
Overall diameter on a 82 mm (~3,23 inches) rim: ~ 665 mm (~25,79 inches).
On a 102 mm (~4,01 inches) rim the tire is about 103 mm (~4,05 inches) wide
On a 80 mm (~3,15 inches) rim the tire is about 93 mm (~3,66 inches) wide.
ETRTO:108 - 507
Weight: 1,95 kg (~4,30 inches)
This tire fits on all 24" Classic Cycle rims wider than 50 mm till 132 mm rims. But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.
Of excellent quality and suitable for your vintage bicycle with hooked bead rims.28 x 1 1/2 edge tires are the suitable replacement for the slightly wider 28 x 1.70 x 1 1/2 edge tires, which are no longer available.1 piece
Tire Kenda Kraze 26 x 3.0
68-559
THE ultra fat custom tire with oldschool tread
The ultimate custom cruiser tire for maximum performance!
On 80 mm (~3,15 inches) silver rim as shown it is 82 mm (~3,23 inches) wide and 66 mm (~2,60 inches) high (above the rim).
On 39 mm (~1,53 inches) rim about 67 mm (~2,64 inches) wide and 62 mm (~2,44 inches) high (above the rim)
This tire fits rims of widths 30 mm (~1,18 inces) to 82 mm (~3,23 inches) width!
If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast.
But please check frame/fork for clearance!
Weight: 1260 g (~2,78 pounds)
30 TPI
Tire Kenda Kraze 20 x 3.0
68-406
THE ultra fat custom tire with oldschool tread
The ultimate custom cruiser tire for maximum performance!
On 82 mm (~3,23 inches) rim it is ~ 80 mm (~3,15 inches) wide and ~ 60 mm (~2,36 inches) high (above the rim).
On 58 mm (~2,28 inches) rim as shown about 74 mm (~2,91 inches) wide and 60 mm (~2,36 inches) high (above the rim)
This tire fits rims of widths 30 mm (~1,18 inces) to 82 mm (~3,23 inches) width!
If you assemble these tire on wide rims not to put more pressure than 40 PSI. It could blast.
But please check frame/fork for clearance!
Weight: 890g (~ 1,96 pounds)
60 TPI
Beaded Edge Tire 28 x 1 1/2 Colour: Brick Red
Outstanding quality, fits on Your oldtimer bicycle with suitable beaded edge rims.
28 x 1 1/2 beaded edge tyre is the perfect alternative for the wider 28 x 1,70 x 1 1/2 which is no longer available.
1 piece
