Headlight Classic LED chrome*
3 white LED
On/Off-Switsch
with 3 batteries LR 03 (AAA)
long lasting light
heavy duty plastic housing
diameter 70 mm (~2,75 inches)
95 mm length (~3,74 inches)
chrome
with small barge
Articles marked with* are not made for puplic use according to the german StVZO. (ONLY important for buyers from GERMANY!)
Classic Cycle Retro LED Battery Frontlamp, 70 mm silver with Visor
old style
Classic retro black lamp with modern LED!
stylish retro LED Lamp
case inside for 3 x battery type AA
Batteries not included
lampsize: 70 mm (~2,76 inches) diamter, 92 mm (~3,62 inches) long (incl. Visor)
Frontreflector within the diffusing screen
8 lux brightness
Material: 100% plastic
Classic Cycle LED Battery Frontlamp, 70 mm chrome with Visor
First quality
Classic retro chrome lamp with modern LED! One strong LED needs little power, so you can use it up to 60 hours with one set of batteries!
Stylish retro LED Lamp
PPS Casingbattery
case inside for 3 x battery type AA (also called LR6, or AM3)
Batteries included
with On/Off switch under the lamp
size: 70 mm (~2,76 inches) diamter, 92 mm (~3,62 inches) long (incl. Visor)
Frontreflector within the diffusing screen
The lamps meet the requirements for IPX-3 EN / IEC 60529 Light requirements acc DS 708.1 paragraph 3.1 + 3.2 + 3.3. According to section 3.2 within an angel range of + - 80 degrees. The lamps meet the requirements for use on dark road DS 7081 section 3.5 The lights are corrosion-free and water resistant: DS / EN 60068-2-52 The headlamp meets the law on road mimimumskrav for brightness, light distribution and service life.Service life: 15 hours(full brightness)Batteries: 3 pcs AA batteriesLED Bulb: 1 LED 4,5V-6V 1W, with 10 lux brightnessMaterials: Glass polypropylen (PP)Housing polyamid (PPS)
Headlight Retro LED chrome 4 LUX*
white LED
On/Off-Switsch
with 2 batteries LR 06 (AA)
100 hours operating time
heavy duty plastic housing
diameter 75 mm (~295 inches)
90 mm (~3,54 inches) length
chrome
Articles marked with* are not made for puplic use according to the german StVZO. (ONLY important for buyers from GERMANY!)
Old Bates style front light LED, glossy black
Retro Style
Diameter:~ 155 mm (~6,10 inches)
Length over all:~ 110 mm (~4,33 inches)
convex glass in front of LED
metal housing
with on/off switch
needs 2 batteries - (LR14)
Top quality
Weight: approx. 780 gr. (~1,72 pounds)
6 LED Battery Frontlamp, 80 mm (~3,15 inches) chrome
Good quality
Classic retro black lamp with modern LED!
Six LED
stylish retro LED Lamp
Metal casing
2 functions: Flash or steady
battery case inside for 3 x battery type AA (also called LR6, or AM3 )
Batteries not included
with On/Off switch on the lamp
size: 80 mm (~3,15 inches) diamter, 110 mm (~4,33 inches) long
Old Bates style front light LED, chrome plated
Retro Style
Diameter:~ 155 mm (~6,10 inches)
Length over all:~ 110 mm (~4,33 inches)
convex glass in front of LED
metal housing
with on/off switch
needs 2 batteries - (LR14)
Top quality
Weight: approx. 780 gr. (~1,72 pounds)
Headlight Classic LED black*
3 white LED
On/Off-Switsch
with 3 batteries LR 03 (AAA)
long lasting light
heavy duty plastic housing
diameter 70 mm (~2,75 inches)
95 mm (~3,74 inches) length
black/chrome
with small barge
Articles marked with* are not made for puplic use according to the german StVZO. (ONLY important for buyers from GERMANY!)
Skull / Deadhead Hazard Light or Bike Light*
NEW !!! Black skull / deadhead with white LED eyes NEW !!!
to be fixed on the handlebar or seat post
integrated switch in nose
crossed bones
dimensions: ~ 31 x 30 mm (~1,22 x 1,18 inches)
plastic / gum
Comes with Battery
Articles marked with* are not made for puplic use according to the german StVZO (ONLY important for buyers from GERMANY!!!).
Classic Cycle LED Battery Frontlamp, 70 mm black with Visor
First quality
Classic retro black lamp with modern LED! One strong LED needs little power, so you can use it up to 60 hours with one set of batteries!
stylish retro LED Lamp
PPS Casingbattery
case inside for 3 x battery type AA (also called LR6, or AM3 )
Batteries included
with On/Off switch under the lamp
size: 70 mm (~2,76 inches) diamter, 92 mm (~3,62 inches) long (incl. Visor)
Frontreflector within the diffusing screen
The lamps meet the requirements for IPX-3 EN / IEC 60529 Light requirements acc DS 708.1 paragraph 3.1 + 3.2 + 3.3. According to section 3.2 within an angel range of + - 80 degrees. The lamps meet the requirements for use on dark road DS 7081 section 3.5 The lights are corrosion-free and water resistant : DS / EN 60068-2-52 The headlamp meets the law on road mimimumskrav for brightness, light distribution and service life.Service life: 15 hours(full brightness)Batteries: 3 pcs AA batteriesLED Bulb: 1 LED 4,5V-6V 1W, with 10 lux brightnessMaterials: Glass polypropylen (PP)Housing polyamid (PPS)
H7 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H7 LED
Standard H7 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
SWINGO LED headlight by Spanninga
The SWINGO headlamp is a beautiful front light in a retro design. It features the authentic style of lights from the 40’s, but its modern LED technology brings the SWINGO up-to-date to current days! Together with the NR9 rearlight, we offer a full set of retro bicycle lightes.
Highlights
The SWINGO headlamp defines itself by its bullet design, integrated reflector and large diameter of 70mm. This large diameter and integrated reflector give a lot of extra safety for the bicycle rider. It makes you very visible on the road and gives a good sight at the same time.
Functions & Performance
The SWINGO headlamp works with 4x AAA batteries (20 Lux version), which are supplied with the headlamp. The light offers an impressive burntime of 40h. The bright output of 20 Lux is achieved by the battery version which conform to the German regulations. It offers the bicycle rider a sight of 30 meters and a visibility distance up to 2000 meters.
The light features a very efficient and therefore low power consumption.
The lamp is according to german StVZO regulations.
Light source: 1 white LED > 20 LUX
Power source: Batteries 4x AAA 1.5V included
Autonomy: max 40 h
Weight: ~ 130g
Colour: black
SWINGO LED headlight by Spanninga
The SWINGO headlamp is a beautiful front light in a retro design. It features the authentic style of lights from the 40’s, but its modern LED technology brings the SWINGO up-to-date to current days! Together with the NR9 rearlight, we offer a full set of retro bicycle lightes.
Highlights
The SWINGO headlamp defines itself by its bullet design, integrated reflector and large diameter of 70mm. This large diameter and integrated reflector give a lot of extra safety for the bicycle rider. It makes you very visible on the road and gives a good sight at the same time.
Functions & Performance
The SWINGO headlamp works with 4x AAA batteries (20 Lux version), which are supplied with the headlamp. The light offers an impressive burntime of 40h. The bright output of 20 Lux is achieved by the battery version which conform to the German regulations. It offers the bicycle rider a sight of 30 meters and a visibility distance up to 2000 meters.
The light features a very efficient and therefore low power consumption.
The lamp is according to german StVZO regulations.
Light source: 1 white LED > 20 LUX
Power source: Batteries 4x AAA 1.5V included
Autonomy: max 40 h
Weight: ~ 130g
Colour: chrome
Apollon Mini LED light set black
Front and Rear
Discreet and yet conspicous: The Apollon Mini LED light setThe Apollon Mini LED light set has a CNC machined aluminum housing and a high quality, domed lens. This provides a wide light cone so that you are safe on the road in the dark.
Number of LED: 1 (red) 1 (white) StVZO
Approval: No
Features / Specifications:
Material: Aluminum (100% CNC machined)
Fixing: versatile installation due to snap-fit O-ring attachment
Dimming levels: no
Flashing modes: flash, and continuous
Battery: CR2032
Other: integrated lens switch to toggle
We supply:
1 x rear light LED
2 x CR2032 battery
1 x Front light LED
2 x CR2032 battery
Retro Style for Greaser and Outsider with paint defect according to picture
Diameter: ~ 160 mm (~6,30 inches)
depth: ~ 140 mm (~5,51 inches)
metal case
The power connection is located in the case and can be easily reached through a large opening.
Voltage : 9V – 85V
with E4 mark (tested by a European authority and given EC approval)
Top quality
the lamp can be used within a e-bike cable harness and has the typical plugs
H4 LED headlight bulb 12V for e-bikes and motorbikes
You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride!
Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine!
Properties of the H7 LED
Standard H7 base
Power: 7W
Voltage: 12V
Light colour: 6000K
Individual under E-bikes
Super white light
Extra long life
Low power consumption
Original accessories from Urban Drivestyle Berlin!
Headlight Retro LED Black / Chrome 4 LUX*
white LED
On/Off-Switsch
with 2 batteries LR 06 (AA)
100 hours operating time
heavy duty plastic housing
diameter 75 mm (~2,95 inches)
90 mm (~3,54 inches) length
Black / Chrome
Articles marked with* are not made for puplic use according to the german StVZO. (ONLY important for buyers from GERMANY!)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in black
Retroreflector integrated into holder with K-approval
Fork mounting interface
For further data, please see the datasheet below.
Battery - Headlight*
swivel mounted
with 55 mm (~2,16 inches) pane and switch, simple quality
plastic, black
dimensions: 80 x 145 x 40 mm (~3,15 x 5,71 x 1,57 inches)
for 2 mono (LR 20) batteries (not included)
headset clip must be ordered seperately (not included)
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
Retro Style Front Light for Greaser and Outsider
Diameter: ~ 160 mm (~6,3 inches)
depth: ~ 140 mm (~5,51 inches)
Metal case chromed
The power connection is located in the case and can be easily accessed through a large opening.
Voltage : 9V – 85V
with E4 mark (tested by a European authority and given EC approval)
Top quality
The lamp can be used within a e-bike cable harness and has the typical plugs
Classic Cycle Retro LED Battery Frontlamp, 65 mm (~2,56 inches) chrome with Visor
old style, high Quality
Classic retro black lamp with modern LED!
stylish retro LED Lamp
PPS Casing
battery case inside for 4 x battery type AAA
Batteries not included
with On Off switch
3 Modes: High; low, flash
lampsize: 65 mm (~2,56 inches) diamter, 93 mm (~3,66 inches) long (incl. Visor)
Frontreflector within the diffusing screen
8 lux brightness
Materials: Glass polypropylen (PP) Housing plastic (PPS)
Bullet Wing Bike Light with Power LED*
Ready for take off!
The Bullet Wing Light uses the ground breaking looks of the Space Age era.Fortunately, the 50s design was adopted and not the technology - the inside was replaced with an ultra bright 1 watt powered LED.
As a highlight: two mounting brackets are included.The Bullet Wing Light can be mounted on either the handlebars or in the classic position on the forks.
1 Watt Power LED
2 light modes: super bright and moderately bright
Splash-proof plastic body in chrome
Approx.12cm x 6cm
Two different brackets included
Requires 4 x AA batteries (not included)
Up to 200 hours light from battery
Visible up to 600m
Tool-free battery change
Articles marked with* are not made for public use according to the german StVZO!
(ONLY important for buyers from GERMANY!!!)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in black
Handlebar bracket interface
For further data, please see the datasheet below.
6 LED Battery Frontlamp, 80 mm (~3,15 inches) black matte
Good quality
Classic retro black lamp with modern LED!
Six LED
stylish retro LED Lamp
Metal casing
battery case inside for 3 x battery type AA (also called LR6, or AM3 )
Batteries not included
with On/Off switch on the lamp
size: 80 mm (~3,15 inches) diamter, 110 mm (~4,33 inches) long
Classic Cycle LED 6V Dynamo Frontlamp, 70 mm chrome with Visor
First Quality
Stylish Retro Design
Classic retro chrome lamp with modern LED! One strong LED
stylish retro LED Lamp 10 Lux
PPS Casingmultipe socket with for IN and OUT - eg. rear lightwith
On/Off switch under the lamp
size: 70 mm (~2,76 inches) diamter, 92 mm (~3,62 inches) long (incl. Visor)
The lamps meet the requirements for IPX-3 EN / IEC 60529 Light requirements acc DS 708.1 paragraph 3.1 + 3.2 + 3.3. According to section 3.2 within an angel range of + - 80 degrees. The lamps meet the requirements for use on dark road DS 7081 section 3.5 The lights are corrosion-free and water resistant : DS / EN 60068-2-52 The headlamp meets the law on road mimimum skrav for brightness, light distribution and service life. Service life: 15 hours (full brightness) LED Bulb: 1 LED 4,5V-6V 1W, with 10 lux brightnessMaterials: Glass polypropylen (PP) Housing polyamid (PPS)
Big Headlight Motobike, chrome*
170 mm
12 V
H 4 E 4
60/55 W
with integrated visor and four grooves on each side
with integrated parking light
You may use this item with a extra scooter 12 V starterbattery
Articles marked with* are not made for public use according to the german StVZO. (ONLY important for buyers from GERMANY!!!)
DOT SET
Mini size, maxi effect! The DOT SET is a compact light set with a lot of energy. The set consists of the DOT FRONT and DOT REAR lights.
Highlights
The DOT lights feature a unique 3 dimensional pattern. They offer an optimal solution for quick and affordable safety.
Light source
DOT FRONT : 1 white LED > 10 LumensDOT REAR : 1 red LED > 10 Lumens
Power source
Batteries 2 x CR2032 3V (DOT FRONT) + 1 x CR2032 3V (DOT REAR)
Autonomy
DOT FRONT : max. 20h / 140h (flash)DOT REAR : max. 30h / 200h (flash)
Battery load indicator
-
Functions
On / Flash
Weight
<30g
Trelock LS780 Airflow 100 LED front light for ebikes
The Trelock LS780 Airflow LED front light for your UNI bike!
StVO-compliant, slim design and powerful light output!
When it comes to front lights, TRELOCK focuses on higher performance with a slim, harmonious design: Thanks to double-lens technology, the Airflow 100 front light, with a compact 45mm housing, achieves a full 100 lux illuminance. Two windows in the housing increase lateral visibility, while a small, removable reflector ensures a slimmer silhouette. The AIRFLOW can be flexibly aligned with the ZL 990 double-axis bracket. The high-quality choice of materials in combination with the reduced design of the AIRFLOW is particularly suited to the demanding cyclist. The Airflow 100 is StVZO-certified.
Compatible with all UNI bikes with Higo 2-pin plug.
Features of the Trelock lamp
Manufacturer: Trelock
Material: Aluminium & plastic
Colour: black
Voltage: 6-12V
Light intensity: 100 Lux
Visibility: 120m / 6500m
Includes: Front lamp, cable with 2-pin female higo round plug red (not fitted), adaptable lamp holder + attachments.
StVO-compliant
Made in Germany
Original accessories from Urban Drivestyle Berlin!
ILLICO 3
Do you think that basic necessarily means primitive? The 3rd generation of the ILLICO lights is the perfect proof that this is not true. The ILLICO 3 headlamp is a clever and good looking front light on each bicycle, which will stand out proudly from the handlebar. You can attach the light in 2 seconds with the convenient, rubber o-ring bracket. Its cute, small design integrates perfectly in the line of the bike, while guaranteeing visibility at night.
Highlights
The ILLICO 3 headlamp has a light output of 4 Lux and a handy switch, which is extremely easy to turn the light ON and OFF.
The ILLICO 3 is extremely light weight (<25g) and truly looks like a small jewel on your handlebar.
Light source
1 white LED > 4 Lux
Power source
Batteries 2 x CR2032 3V included
Autonomy
Max. 10h
Battery load indicator
Yes
Functions
-
Weight
<25g
AXA Headlight Classic LED black*
1 white LED
On/Off-Switsch
with 3 batteries LR 03 (AAA)
long lasting light
heavy dutyplastic housing
diameter 74 mm (~2,91 inches)
90 mm (~3,54 inches) length
black/chrome
with small barge
good quality
with batteries
Articles marked with* are not made for puplic use according to the german StVZO.(ONLY important for buyers from GERMANY!)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in silver (brushed aluminium)
Retroreflector integrated into holder with K-approval
Fork mounting interface
For further data, please see the datasheet below.
Classic Cycle LED 6V Dynamo Frontlamp, 70 mm black with Visor
First Quality
Stylish Retro Design
Classic retro black lamp with modern LED! One strong LED
stylish retro LED Lamp 10 Lux
PPS Casingmultipe
socket with for IN and OUT - eg. rear light
with On/Off switch under the lamp
size: 70 mm (~2,76 inches) diamter, 92 mm (~3,62 inches) long (incl. Visor)
The lamps meet the requirements for IPX-3 EN / IEC 60529 Light requirements acc DS 708.1 paragraph 3.1 + 3.2 + 3.3. According to section 3.2 within an angel range of + - 80 degrees. The lamps meet the requirements for use on dark road DS 7081 section 3.5 The lights are corrosion-free and water resistant: DS / EN 60068-2-52 The headlamp meets the law on road mimimum skrav for brightness, light distribution and service life.Service life: 15 hours(full brightness) LED Bulb: 1 LED 4,5V-6V 1W, with 10 lux brightness Materials: Glass polypropylen (PP) Housing polyamid (PPS)
Headlight Illumination Unit*
6 V
3 W
dynamo and headight in one unit
for left hand side mounting on fork
comes with holder
Articles marked with* are not made for public use according to the germanStVZO. (ONLY important for buyers from GERMANY!!!)
DOT FRONT
Mini size, maxi effect! The DOT headlamp for bicycles is a compact product with a lot of energy. It is available separately.
Highlights
The DOT FRONT features a unique 3 dimensional pattern. It offers an optimal solution for quick and affordable safety. The DOT headlamp is a very iconic product on your bicycle.
Light source
1 white LED > 10 Lumens
Power source
Batteries 2 x CR2032 3V
Autonomy
Max. 20h / 140h (flash)Danish regulation : max. 30h / 140h (flash)
Battery load indicator
-
Functions
On / Flash
Weight
<15g
Bullet Wing Bike Light with Power LED black matt*
Ready for take off!
The Bullet Wing Light uses the ground breaking looks of the Space Age era.Fortunately, the 50s design was adopted and not the technology - the inside was replaced with an ultra bright 1 watt powered LED.
As a highlight: two mounting brackets are included.The Bullet Wing Light can be mounted on either the handlebars or in the classic position on the forks.
1 Watt Power LED
2 light modes: super bright and moderately bright
Splash-proof plastic body in black matt
Approx.12cm x 6cm
Two different brackets included
Requires 4 x AA batteries (not included)
Up to 200 hours light from battery
Visible up to 600m
Tool-free battery change
Articles marked with* are not made for public use according to the german StVZO!
(ONLY important for buyers from GERMANY!!!)
6 LED Battery Frontlamp, 80 mm (~3,15 inches) chrome
Good quality
Classic retro black lamp with modern LED!
Six LED
stylish retro LED Lamp
Metal casing
2 functions: Flash or steady
battery case inside for 3 x battery type AA (also called LR6, or AM3 )
Batteries not included
with On/Off switch on the lamp
size: 80 mm (~3,15 inches) diamter, 110 mm (~4,33 inches) long
UD Moke 6 1/2 inch main headlight
Asymmetrical headlight with metal housing
Side M8 mounting holes including screws.
Housing in gloss black and lamp ring in black.
Clear plastic lens.
H4 insert with parking light (- parking light not connected), E4 approved.
Dimensions:
Housing diameter: 190 mm
Diameter between the mounting holes: 170 mm
Scope of delivery: 1 piece including H4 - HIGO plug
Please order accessories separately:
LED lamp article no.: LED-BUL-12V or UD3597
Note: Without bulb
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in silver (brushed aluminium)
Handlebar bracket interface
For further data, please see the datasheet below.
Dyno Tiki Taboo Light
The tiki light for your bike!
Original part of Dyno Taboo Tiki Beach Cruiser
Parking light, flashing or fast flashing.
For mounting on the handlebar and fender.
Alternatively you can replace the bracket and mount the Tiki on the fender.
€69.95*
This website uses cookies to ensure the best experience possible. More information...
