Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 80 mm (~3,15 inches)
Thick: 1,1 mm (~0,043 inches)
Length: 2350 mm (~ 92,52 inches)
~ 255 g ( ~ 0,56 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Piece
Width: 100 mm (~3,94 inches)
Thick: 1,3 mm (~0,051 inches)
Length: 2350 mm (~ 92,52 inches)
~ 400 g (~ 0,88 lbs)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.
Fat Bike Plastic Fender Set 26 x4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width
124 mm (~4,88 inches) wide, 26 inch., black matte
Can also be fitted on 24 x 4 1/4 Tires
complete plastic fender set for Fat Bikes or similar bike types
Width: 124 mm (~4,88 inches)
Hight: 35 mm (~1,38 inches)
Diameter inside: ~ 770 mm (~30,31 inches)
Diameter outside: ~ 810 mm (~31,89 inches)
Rear length in circumference: ~1190 mm (~46,85 inches)
Front length in circumference: ~ 700 mm (~27,56 inches)
Polycarbunate plastic black matte
Weight: ~ 1200 g. (~2,65 pounds)
Fat Bike Plastic Fender Set 26 x4.0 - 4.8 inch. Fender Stays 124 mm (~4,88 inches) width
124 mm (~4,88 inches) wide, 26 inch., black
Can also be fitted on 24 x 4 1/4 Tires
complete plastic fender set for Fat Bikes or similar bike types
Width: 124 mm (~4,88 inches)
Hight: 35 mm (~1,38 inches)
Diameter inside: ~ 770 mm (~30,31 inches)
Diameter outside: ~ 810 mm (~31,89 inches)
Rear length in circumference: ~1190 mm (~46,85 inches)
Front length in circumference: ~ 700 mm (~27,56 inches)
Polycarbunate plastic black glossy
Weight: ~ 1200 g. (~2,65 pounds)
Fat Bike Tire Classic Cycle Zig Zag 26 x 4.0 whitewall
97/102-559
72 TPI = Lightweight and strong!
max load = 155kg/pc
About 87 mm (~4,25 inches) wide on a 80 mm (~3,15 inches) rim.
About 107 mm (~4,21 inches) wide on a 100 mm (~3,94 inches) rim.
This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance!
The pictures shows the new Zig Zag Tire assembled on a 132 mm (~5,2 inches) wide rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/- 0,79 inches) concerning to pressure and rim diameter.
Weight: 1890 g (~4,17 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 piece
Tube recommendation: For rim widths up to 102 mm (~4 inches): 26 x 4.0 tube. For wider rims: till 26 x 5.0 tube
Notice:
The white sidewall has a very slight bluish tinge.The bluish part is to prevent yellowing.
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 100 -120 x 406 / 20" x 4.0 - 4.8
*Tube - 90 - 120 x 406 / 20 x 3.0- 4.0
Rim - 65 - 140 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 360 g
scope of delivery: 1 piece
*Please note: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 3.0 - 3.75 is recommended.
From our list the Kenda Kraze 20 x 4.0 won't fit. It is not bollooning enaugh.
Fender Set 26 inch. Fender Stays 123 mm width
123 mm (~4,84 inches) wide, 26 inch., matte black and extra long in the rear
complete fender set for cruisers or similar bike types
Width: 123 mm (~4,84 inches)
Hight: 30 mm (~1,18 inches)
Diameter inside: ~ 770 mm (~30,3 inches)
Diameter outside: ~ 810 mm (~31,89 inches)
Rear lenght in circumference: ~125 cm (~49,2 inches)
Front length in circumference: ~ 80 cm (~31,5 inches)
Steel powder coated flat black
Weight: ~ 2,6 kg (~5,73 pounds)
On chainside of the rear fender you will find a benting to give way to the chain.
Fat Bike Tire Classic Cycle Zig Zag 26 x 4.0
97/102-559
72 TPI = Lightweight and strong!
max load = 155kg/pc
About 87 mm (~3,42 inches) wide on a 82 mm (~3,22 inches) rim.
About 105 mm (~4,13 inches) wide on a 102 mm (~4,02 inches) rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/-0,79 inches) concerning to pressure and rim diameter.
This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance!
The last two pictures show the Zig Zag mounted on a 132 mm (~5,2 inches) wide black rim from us.
Attention: In these two pictures the labeling of the tires differs from the actual tires!
Weight: 1620 g (~3,57 pounds)
If you assemble the tire on extra wide rims do not to put more pressure than 16 PSI. It could blast.
1 Piece
Tube recommendation: 26 x 4.0 tube
Fat Bike Tire Classic Cycle Fleetwood 26 x 4.0
100-559
30 TPI = Sturdy and strong!
Intensive tread knob layout offers excellent traction and gripping power
Shoulder tread knobs connecting design enhances comering grip power and stability
About 87 mm (~3,42 inches) wide on a 80 mm (~3,15 inches) rim.
About 107 mm (~4,12 inches) wide on a 100 mm (~3,94 inches) rim.
This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance!
The pictures shows the new Fleetwood Tire assembled on a 132 mm (~5,2 inches) wide rim.
Diameter complete: 730 mm + / - 20 mm (~28,74 +/-0,79 inches) concerning to pressure and rim diameter.
Weight: 1700 g (~3,75 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 Piece
Tube recommendation: 26 x 4.0 tube
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
36
colour:
black
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
36
colour:
High polished
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1365 g (~3 pounds)
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) ide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
36
colour:
raw
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1395 g (~3,07 pounds)
Fat Bike Cartrige B.B. Set for 100mm housing
silver
for 100 mm bottom bracket housing
total length (L1): 159,50 mm (~6,28 inches)
L2: 25,5 mm (~1 inch)
430 gr.
BSA, JIS
sealed bearings
Dacromet coated axle
compatible with Shimano tools
Fat Bike Cartridge B.B. Set for 120mm housing
black
for 120 mm bottom bracket housing
total length (L1): 180 mm (~7,08 inches)
L2: 32 mm (~1,26 inch)
~ 400 gr.
BSA, JIS
sealed bearings
compatible with Shimano tools
Extra wide Front Hub for 100 mm (~3,94 inches) rims and extra wide forks for Disc Brakes
Fog Black matte
36 spoke holes
215 mm (~8,46 inches) axle
mounting size: 150 mm (~5,90 inches)
spacing between flanges: 91,7 mm (~3,61 inches)
PCD: 57,5 mm (~2,26 inches)
Weight: 398 gr. (~0,88 pounds)
Aluminium Alloy Rim 26 inch., 102 mm (~4,01 inches) wide
ETRTO: 559
double wall 102
the ultimate ultra fat custom chopper wheel
wide:
102 mm (~4,01 inches)
Inner size:
95 mm (~3,74 inches)
holes:
36
colour:
black matte
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1490 g (~3,28 pounds)
Aluminium Alloy Rim 26 inch., 102 mm (~4,01 inches) wide
ETRTO: 559
double wall 102
Wide:
102 mm (~4,01 inches)
inner size:
95 mm (~3,74 inches)
Holes:
36
colour:
high polished
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1465 kg (~3,23 pounds)
NEW Classic Cycle Dual Springer Vintage Bicycle Fork for Fat Bikes
with Disc Brake mount
with 1 1/8 inch steerer
Abraham Linkage Monark Fork
The most beautyful springer ever produced now for 100 mm (~3,94 inches) rims suits Sand, Snow or Fat Bikes up to 26 x 4.5 Tires
up to 26 inch., adjustable springs
black with chrome-plated springs
1 1/8 inch steerer = 28,6 mm
total steerer lengh: 239 mm (~9,41 inches)
without thread for ahead headset
Width between Fork legs: 140 mm (~5,51 inches)
Axle mount width: 135 mm (~5,31 inches)
Distance between fork crown and axle dropout: 430 mm (~16,93 inches)
Weight: 3,27 kg (~7,21 pounds)
with mount for Disc brake (160 mm (~6,30 inches) max. rotor)
Original Classic Cycle Cruiser Springfork Model Monark
Aluminium Alloy Rim 26 inch., 102 mm (~4,01 inches) wide
ETRTO: 559
double wall 102
the ultimate ultra fat custom chopper wheel
Wide:
102 mm (~4,01 inches)
inner size:
95 mm (~3,74 inches)
Holes:
36
colour:
raw
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1470 g (~3,24 pounds)
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 100 -120 x 559 / 26" x 4.0 - 4.8
*Tube - 90 - 120 x 559 / 26 x 3.0- 4.0
Rim - 65 - 120 x 559
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: ~600 g
scope of delivery: 1 piece
*Please note: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 26 x 3.0 - 4 is recommended.
Extra Wide Double Crown Fork 660 mm black 1 1/8 steerer
noble and supercool, for 20-26 inch. wheels, 1 1/8 inch steerer,
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Extra wide Coaster Brake Hub for 100 - 132 mm rims black
36 spoke holes, 210 mm (~8,27 inches) axle with 18T sproket
mounting size: 166 mm (~6,53 inches)
with mounting hardware
spacing between flanges: 102 mm (~4,01 inches)
PCD: 51,3 mm (~2,02 inches)
Cruiser / Fat Bike Vee Rubber Chicane 26 x 3.5 black with skinwall
89-559
72 TPI = Lightweight and strong!
About 98 - 105 mm (~3,86 -4,13 inches) wide on a 82 mm (~3,23 inches) rim.
About 123 mm (~4,84 inches) wide on a 132 mm (~5,19 inches) rim.
This tire fits on all 26" Classic Cycle rims from 60 to 132 mm (~2,36 - 5,20 inches) width! But please check frame/fork for clearance!
Diameter complete: 730 mm + / - 20 mm (~28,74 +/- 0,08 inches) concerning to pressure and rim diameter.
Weight: 1350 gr. (~2,97 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 piece
Tube recommendation: For rim widths up to 82 mm(~3,23 inches): 26 x 3.0 tube. For wider rims: 26 x 4.0 tube
Extra wide Alu Hub black for front wheel for Disc Brake
Mounting size: 135 mm (~5,31 inches)
Flange width (FTF): 75 mm (~2,95 inches)
Pitch Circle Diameter (PCD): 58 mm (~2,28 inches)
Spoke Holes: 36 Holes 14G = 2 mm (~0,08 inches) Spokes
Weight: 262 g (~0,6 lbs )
with quick release
Extra wide and fat Double Crown Fork, 700 mm (~27,56 inches), 50 mm (~1,97 inches), black, up to 28"
50 mm (~1,97 inches) tubes! Superfat!
noble and supercool, for up to 28 inch. wheels, 1 1 /8 inch steerer,
Alloy triple trees and chrome-plated steel fork tubes for discbrakes.
The ultimate fork for custom chopper and cruiser freaks!
A - fork tube length: about 700 mm (~27,56 inches)
B - Fork tube diameter: 50.8 mm (~2 inches)
C - Fork tube inner width: 125 mm (~4,92 inches)
D - Width between axle mounts: 150 mm (~5,90 inches)
E - Steerer length: 300 mm (~11,81 inches)
F - Steerer diameter: 1 1/8 inch - 30 mm
G -Distance outside edges of the risers: 95 mm (~3.74 inches)
H - Handlebar mount: 22.22 mm
weight: 3,95 kg (~8,71 pounds)
You can shorten the tubes and stem.These fork is developed for 100 mm (~3,94 inches) rims.
Extra Wide Double Crown Fork 900 mm black 1 1/8 Steerer
noble and supercool, for 20-28 inch wheels
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakes
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 900 mm (~35,43 inches)
CRMO fork diameter: 32 mm (~1,26 inches)steerer length: 295 mm (~11,61 inches)
1 1/8 inch steerer
Extra wide and fat Double Crown Fork, 700 mm (~27,56 inches), 50 mm (~1,97 inches), black, up to 28"
50 mm (~1,97 inches) tubes! Superfat!
noble and supercool, for up to 28 inch. wheels, 1 inch steerer
Alloy triple trees and chrome-plated steel fork tubes for discbrakes.
The ultimate fork for custom chopper and cruiser freaks!
A - Fork tube length: about 700 mm (~27,56 inches)
B - Fork tube diameter: 50.8 mm (~2 inches)
C - Fork tube inner width: 125 mm (~4,92 inches)
D - Width between axle mounts: 150 mm (~5,90 inches)
E - Steerer length: 300 mm (~11,81 inches)
F - Steerer diameter: 1 inch
G -Distance outside edges of the risers: 95 mm (~3.74 inches)
H - Handlebar mount: 22.22 mm
weight: 3,95 kg (~8,71 pounds)
You can shorten the tubes and stem.
These fork is developed for 100 mm (~3,94 inches) rims.
Cruiser / Fat Bike Tire Vee Rubber Chicane 26 x 3.5 black
89-559
72 TPI = Lightweight and strong!
About 98 mm (~3,86 inches) wide on a 82 mm (~3,23 inches) rim.
About 123 mm (~4,84 inches) wide on a 132 mm (~5,19 inches) rim.
This tire fits on all 26" Classic Cycle rims from 60 to 132 mm (~2,36 - 5,20 inches) width! But please check frame/fork for clearance!
Diameter complete: 730 mm + / - 20 mm (~28,74 +/- 0,08 inches) concerning to pressure and rim diameter.
Weight: 1350 gr. (~2,97 pounds)
If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast.
1 piece
Tube recommendation: For rim widths up to 82 mm(~3,23 inches): 26 x 3.0 tube. For wider rims: 26 x 4.0 tube
Aluminium Alloy Rim 26 inch., 82 mm (~3,23 inches) wide
ETRTO: 559
double wall 82
the ultimate ultra fat custom chopper wheel
wide:
82 mm (~3,23 inches)
Inner size:
75 mm (~2,95 inches)
holes:
32
colour:
black matte
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1400 g (~3,09 pounds)
Aluminium Alloy Rim 26 inch., 102 mm (~4,02 inces) wide
ETRTO: 559
double wall 102
the ultimate ultra fat custom chopper wheel
Wide:
102 mm (~4,02 inces)
inner size:
95 mm (~3,74 inches)
Holes:
32
colour:
black matte
Rim diameter for calculating the spoke length:
536 mm (~21,10 inches)
Weight:
1490 g (~3,28 pounds)
Extra wide Coaster Brake Hub for 100 - 132 mm rims
36 spoke holes, 210 mm axle with 18T sproket
mounting size: 166 mm
with mounting hardware
spacing between flanges: 102 mm
PCD: 51,3 mm
Aluminium Alloy Rim 26 inch., 132 mm (~5,20 inches) wide
ETRTO: 559
single wall 132
the ultimate ultra fat custom chopper wheel
Wide:
132 mm (~5,20 inches)
inner size:
125 mm (~4,92 inches)
Holes:
36
colour:
black matte
Rim diameter for calculating the spoke length:
537 mm (~21,14 inches)
Weight:
1490 g (~3,28 pounds)
Extra wide Front Hub for 100 mm rims and extra wide forks
Fog Black matte
36 spoke holes,
215 mm (~ 8,46 inches) axle
mounting size: 150 mm (~5,91 inches)
spacing between flanges: 92,50 mm (~3,64 inches)
PCD: 44,2 mm (~1,74 inches)
Weight:370 gr. (~0,82 pounds)
Extra Wide Double Crown Fork 660 mm
Noble and supercool, for 20-26 inch. wheels, 1 inch stem, incl. spacer for 1 1/8 frame steerer.
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
steerer length: 295 mm (~11,61 inches)
fork tube inner width: about 144 mm (~5,67 inches)
width between axle mounts: 150 mm (~5,90 inches)
CRMO fork tube length: 660 mm (~25,98 inches)
CRMO fork diameter: 32 mm (~1,26 inches)
Wide rim tape 26 inch, black
Wide and durable nylon rim tape, especially suitable for rims with cut outs.
Details:
Material: nylon
Width: 75 mm / 2,95 inch
Length: approx. 850 mm / 33,45 inch double laid
Colour: black
Design: closed rim tape with valve hole
General information:The rim tape protects the tube from damage by the rim. Spoke nipples, rim holes and possible metal burrs of the rim could otherwise damage the bicycle inner tube. Rim tapes are placed around the rim and are made of durable and sturdy material. Assembly:The rim tape is closed and is pulled onto the wheel with appropriate tension and then moved into position.
NEW Classic Cycle Dual Springer Vintage Bicycle Fork for Fat Bikes
with Disc Brake mount
with 1 inch steerer
Abraham Linkage Monark Fork
The most beautyful springer ever produced now for 100 mm (~3,94 inches) rims suits Sand, Snow or Fat Bikes up to 26 x 4.5 Tires
up to 26 inch., adjustable springs
black with chrome-plated springs
1 inch steerer = 25,4 mm
total steerer lengh: 239 mm (~9,41 inches)
without thread for ahead headset
Width between Fork legs: 140 mm (~5,51 inches)
Axle mount width: 135 mm (~5,31 inches)
Distance between fork crown and axle dropout: 430 mm (~16,93 inches)
Weight: 3,27 kg (~7,21 pounds)
with mount for Disc brake (160 mm (~6,30 inches) max. rotor)
Original Classic Cycle Cruiser Springfork Model Monark
Extra wide Front Hub with disc brake mount
for example 100 mm (~3,94 inches) rims and extra wide forks
144 holes
200 mm (~7.87 inches) axle
mounting size: 150 mm (~5,90 inches)
Pitch circle inside 65 mm (~2,56 inches)
Bolt circle diameter outside 75 mm (~2,95 inches)
spacing between flanges: 98 mm (~3,86 inches)
Weight: 840 gr. (~1,85 pounds)
Disc brake mounts
Suitable for spokes up to 2.3 mm / 0,09 inch in diameter.
Extra wide Rear Hub with disc brake mount
144 holes
190 mm (~7.48 inches) axle
mounting size: 135 mm (~5,31 inches)
Pitch circle inside 68 mm (~2,68 inches)
Bolt circle diameter outside 75 mm (~2,95 inches)
spacing between flanges: 83 mm (~3,27 inches)
Weight: 770 gr. (~1,7 pounds)
Disc brake mounts
Extra wide Front Hub for 100 mm (~3,94 inches) rims and extra wide forks for Disc Brakes
Silver
36 spoke holes
215 mm (~8,46 inches) axle
mounting size: 150 mm (~5,90 inches)
spacing between flanges: 91,7 mm (~3,61 inches)
PCD: 57,5 mm (~2,26 inches)
Weight: 398 gr. (~0,88 pounds)
Extra Wide Double Crown Fork 900 mm black
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and black CRMO fork tubes with attachments for drum- and disc brakesFork tube length: 900 mm (~35,43 inches) Diameter tube: 32 mm (~1,26 inches) Fork tube inner width: about 144 mm (~5,67 inches) Width between axle mounts: 150 mm (~5,90 inches) Steerer length: 295 mm (~11,61 inches) Steerer diameter: 1 inch (25,4 mm)
Wide rim tape 26 inch, red
Wide and durable nylon rim tape, especially suitable for rims with cut outs.
Details:
Material: nylon
Width: 75 mm / 2,95 inch
Length: approx. 850 mm / 33,45 inch double laid
Colour: red
Design: closed rim tape with valve hole
Wide and durable nylon rim tape, especially suitable for rims with cut outs.
Details:
Material: nylon
Width: 75 mm / 2,95 inch
Length: approx. 620 mm / 24,41 inch double laid
Colour: black
Design: closed rim tape with valve hole
General information:The rim tape protects the tube from damage by the rim. Spoke nipples, rim holes and possible metal burrs of the rim could otherwise damage the bicycle inner tube. Rim tapes are placed around the rim and are made of durable and sturdy material.
Assembly:The rim tape is closed and is pulled onto the wheel with appropriate tension and then moved into position.
Extra Wide Double Crown Fork 900 mm
noble and supercool, for 20-28 inch. wheels, 1 inch steerer, incl. spacer for 1 1/8 frame steerer
alloy bridges and chrome-plated CRMO fork tubes with attachments for drum- and disc brakes
Fork tube length: 900 mm (~35,43 inches)
Diameter tube: 32 mm (~1,26 inches)
Fork tube inner width: about 144 mm (~5,67 inches)
Width between axle mounts: 150 mm (~5,90 inches)
Steerer length: 295 mm (~11,61 inches)
Steerer diameter: 1 inch (25,4 mm)
Wide rim tape 26 inch, yellow
Wide and durable nylon rim tape, especially suitable for rims with cut outs.
Details:
Material: nylon
Width: 75 mm / 2,95 inch
Length: approx. 850 mm / 33,45 inch double laid
Colour: yellow
Design: closed rim tape with valve hole
General information:The rim tape protects the tube from damage by the rim. Spoke nipples, rim holes and possible metal burrs of the rim could otherwise damage the bicycle inner tube. Rim tapes are placed around the rim and are made of durable and sturdy material. Assembly:The rim tape is closed and is pulled onto the wheel with appropriate tension and then moved into position.
Fat Bike Cartridge B.B. Set for 100mm lugs
black
for 100 mm bottom bracket lugs
housing: 90 mm ( ~ 3,54 inches)
total axle length (L1): 180 mm (~7,08 inches)
length between L2: 44 mm (~1,73 inch)
~ 395 gr.
BSA, ISO
sealed bearings
compatible with Shimano tools
Display Stand SuperStand for Fat Bikes
Fat Rack
Silvergrey
easy roll in and out
adjustable for different tire width
with non slip feet
for bikes with 2.75"-5.25" tire width
demountable
2.75 - 5.25"
size: 12 - 29"
€39.95*
€49.95*(20.02% saved)
This website uses cookies to ensure the best experience possible. More information...
