Sting-Ray Handlebar Black
for the Sting-Ray or similar cult bikes of the 60s and 70s
black steel
dimensions: about 660 x 350 mm (25,9 x 13,78 inches)
for 22 mm (0,87 inches) stems
Highriser Handlebar
for the Polo Bike or similar cult bikes of the 60s and 70s
chrome-plated (ASTM9) steel
Gripwidth: 640 mm (~25,2 inches)
Griphight: 325 mm (~12,79 inches)
Griplength: 120 mm (~4,72 inches)
for 25,4 mm (~1 inch) stems
Head Set Adapter kit 1 - 1 1/8 inch.
2 pieces, alloy
to install into head of the frame to reduce head tube for using head set with smaller diameter
to reduce 1 1/8" to 1"
outer diameter: 34,0 mm (~1,34 inches)
inner diameter: 30,2 mm (~1,19 inches)
Frame and Fork Protectorsfor Double Crown Forks 30
to protect Your frame and your double crown fork from dings and dents!
30 mm (~1,18 inches), 1 pair for 32 mm (~1,26 inches) tubes
Sting-Ray Handlebar
for the Sting-Ray or similar cult bikes of the 60s and 70s
chrome-plated steel
dimensions: about 660 x 350 mm (~25,98 x 13,78 inches)
for 22 mm (~0,87 inches) stems
Apehanger Shorty Handlebar Black
black Hi-Ten steel
dimensions: about 800 x 450 mm (~31,50 x 17,72 inches)
for 22,2 mm (~0,87 inches) stems
The decent cruiser chopper apehanger!
Order-no: 999
Tire Alarm Bell
chrome-plated housing
zinc-plated holder and handlebar lever
You will be loud and proud while operating this tire bell!
New !!! Better Version!!!
Building move: 56 cm (~22,05 inches)
Apehanger Shorty Handlebar
chrome-plated Hi-Ten steel
dimensions: about 800 x 450 mm (~31,5 x 17,72 inches)
for 22,2 mm (~0,87 inches) stems
The decent cruiser chopper apehanger!
Highriser Handlebar black
For the Polo Bike or similar cult bikes of the 60s and 70s.
black steel
Dimensions:
Grip width: 640 mm (~25,20 inches)
Grip hight: 325 mm (~12,79 inches)
Grip length: 120 mm (~4,72 inches)
for 25,4 mm (~1 inch) stems
Krate Handlebar black
slightly cranked
black anodized Hi-Ten steel
dimensions: about 800 x 330 mm (~31,50 x 12,99 inches)
for 22,2 mm (~0,87 inches) stems
Buffalo V Handlebar black
For the Sting-Ray or similar cult bikes of the 60s and 70s.
black steel
dimensions: about 680 x 330 mm (~26,77 x 12,99 inches)
for 22,2 mm (~0,87 inches) stems
XXXtra Wide Cruiser Handlebar Black 81
The ultimate handlebar for nostalgia custom cruiser hot rod freaks!
810 mm x 390 mm (~7,09 x 15,35 inches)
Hi-Ten steel, chrome-plated, rounded
for 22,2 mm (~0,87 inches) stems
Buffalo V Handlebar
For the Sting-Ray or similar cult bikes of the 60s and 70s.
chrome-plated steel
dimensions: about 680 x 330 mm (~26,77 x 12,99 inches)
for 22,2 mm (~0,87 inches) stems
Item No.: BH41sw
Classic Cycle Cruiser handlebar black
Really modest and cool!!!
We planed to make cruising much more convenient to you and now we can present our new handlebar.
The nice hand position is perfect for comfortable biking and at the same time cool and outstanding. Try it and you will be excited.
Hi-Ten Steel black
73 cm (~28,74 inches) wide
round
for 25,4 cm (~1 inch) Stems
Raise max. 24 cm (~9,45 inches)
Diameter of bar is 22,2 mm (~0,87 inches).
Also available in chrome Item No.: BH41
Semi Dragbar 77 chrome
steel, chrome-plated
width: 770 mm (~3,031 inches)
height: 110 mm (~4,33 inches)
for 25,4 mm (~1 inch) stems
Length of grip: 210 mm (~8,27 inches)
also available in black (#650 SW)
Innovative and beautiful mini bell made of copper
very loud and long lasting sound (100dB)
body made of copper
diameter 30 mm / 1,18 inch
innovative assembly using 2 different fastening clamps 22.2 - 40 mm / 0,87 - 1,57 inch in diameter
weight 48 g / 0,11 pounds
incl. rubber inlay
colour black
For the assembly, only the upper screw is loosened with the help of an Allen key. Choose the appropriate fastening clamp and tighten everything again.
Rubber Grips black
117 mm (~4,61 inches) long for 22 mm (~0,87 inches) handlebars
Like they were in the 60s/70s!
the coolest grips You can put on Your Krate, Stingray or other oldschool stuff
1 Pair
Rubber Grips white
117 mm (~4,61 inches) long for 22 mm (~0,87 inches) handlebars
Like they were in the 60s/70s! The coolest grips You can put on Your Krate, Stingray or other oldschool stuff.
one pair
Stem with 22,2 mm (~0,87 inches) shaft
black aluminium, with CP steel stem shaft
4 Screws
handlebar acceptance 22,2 mm (~0,87 inches)
65 mm (~2,56 inches) max. height / 35 mm (~1,38 inches) nosing
XXXtra Wide Cruiser Handlebar 81
The ultimate handlebar for nostalgia custom cruiser hot rod freaks!
810 mm x 390 mm (~31,89 x 15,35 inches)
Hi-Ten steel, chrome-plated, rounded
for 22,2 mm (~0,87 inches) stems
Semi Dragbar 77 black
steel, black
width: 770 mm (~30,15 inches)
height: 110 mm (~4,33 inches)
for 25,4 mm (~1 inch) stems
Length of grip: 210 mm (~8,27 inches)
also available chrome-plated (#652 CP)
Frame and Fork Protectorsfor Double Crown Forks 50
to protect Your frame and your double crown fork from dings and dents!
50 mm (~1,97 inches), 1 pair for 32 mm (~1,26 inches) tubes
Apehanger Handlebar
chrome-plated steel
dimensions: about 1000 x 635 mm (~39,37 x 25 inches)
for 22,2 mm (~0,87 inches) stems
The ultimate cruiser chopper apehanger!
Apehanger Handlebar
black steel
dimensions: about 1000 x 635 mm (~39,37 x 25 inches)
for 22,2 mm (~0,87 inches) stems
the ultimate cruiser chopper apehanger!
Wooden Grips Classic
Mahagony
These beautiful handlebar grips made - - from real wood look on your bike look great and with class.
The clamping rings are fixed with screws enabling perfect fitting
Innovative screw / clamp system
Suitable for handlebars with 22.2 mm (~0,87 inches) diameter
Material: Mahagony hard wood natural, clear lacquered
with end caps made of plastic
Length: 135 mm (~5,31 inches)
Weight: 120 gr. (~0,26 pounds)
1 Pair
Cruiser Moon Handlebar, black
Hi-Ten steel, black
Width 695 mm (~27,36 inches)
Raise: 100 mm (~3,94 inches)
Depth: 300 mm (~11,81 inches)
for 25.4 mm (~1 inch) stems
old style cruising will never die!
Outer Cable Housing Silver Plaited Look Metallic 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Outer Cable Housing Chrome 2,50 m x 5 mm (~2,73 yards x 0,2 inches)
*Bling - Bling*
For shifter or brake cable
1 piece of 2.50 m (~2,73 yards) with 4 alloy endcaps
Compatible with all inner wire of 1.5 / 1.6 mm (~0,06 inches) including Shimano, XLC Jagwire, ...
Compatible with all rim or drum brakes also MTB and racing Bikes
Available in a lot of colours and designs
Innovative and beautiful mini bell made of copper
very loud and long lasting sound (100dB)
body made of copper
diameter 30 mm / 1,18 inch
innovative assembly using 2 different fastening clamps 22.2 - 40 mm / 0,87 - 1,57 inch in diameter
weight 48 g / 0,11 pounds
incl. rubber inlay
colour silver
For the assembly, only the upper screw is loosened with the help of an Allen key. Choose the appropriate fastening clamp and tighten everything again.
€12.95*
This website uses cookies to ensure the best experience possible. More information...
