Kenda K-55 20 x 2.125, black with red stripe

Classic Cycle

€19.95*

Prices incl. VAT plus shipping costs

Product number: 527087

Product information "Kenda K-55 20 x 2.125, black with red stripe"

Kenda K-55 20 x 2.125

57-406

Nice black tyre with red stripe.

Suitable tyre for rims up to approx. 67 mm / 2,64 inches wide.

Weight: ~ 600 g / 1,32 lbs

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

Rimstrip 20 inch. 30 mm Y748

Rimstrip 20 inch. width: 30 mm (~1,18 inches) Will fit on tire and rims 47-406, 50-406, 57-406 20x 1.7, 20 x 1.90, 20 x 2.125 or nearby

€0.94*

Tube 20 inch. with Auto / Car Valve Y745

Tube 20 inch. with Auto / Car Valve for tires: 47 -406, 50- 406, 57-406 20 x 1.75, 20 x 1.90, 20 x 2.125

€2.99*

Kenda Kraze 26 x 2.125 Oldschool Tire, whitewall 529357

Tire Kenda Kraze 26 x 2.125, whitewall 57-559 THE ultra custom tire with oldschool tread! The ultimate custom cruiser tire for maximum performance! On 57 mm (~2,25 inches) rim as shown it is 60 mm (~2,36 inches) wide and 46 mm (~1,81 inches) high (above the rim). This tire fits rims of widths 30 mm (~1,18 inces) to 67 mm (~2,64 inches) width! If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast. But please check frame/fork for clearance! Weight: ~ 1050 g (~ 2,3 pounds) 30 TPI

€31.95*

24 x 3.0 Thick Brick Tire Whitewall Y485N

Thick Brick 24 x 3.0 Whitewall (75-507) THE ultra fat custom tire !!! The ultimate custom cruiser and lowrider tire for maximum show performance! Compatible with : Classic Cycle rims - 24" 30 - 82 mm wide Specifications: ETRTO: 75 - 507 Width of the inflated tire: ~ 75 mm Mounted on an 82 mm wide rim, the tire is approximately 87 mm wide. Total diameter of the tire mounted on a 82 mm wide rim: ~ 665 mm Weight: ~ 1.3 kg Height: Thick Brick tire is built approximately 66 mm above the rim edge Pressure: 30 - 40 PSI / 2.1 - 2.8 bar Please check the spacing to the frame and/or fork We recommend not to inflate the tire above 30 PSI / 2.0 bar for rims that are too wide, otherwise the sidewall thread may tear. Scope of delivery: 1 piece

€39.95*

Valve Caps Spades, black Y825

Valve Caps Spades, black 1 pair, black, fits on all standard auto / car / motorcycle valves The ultimate custom hot rod look for Your bike! Trik Topz

€6.99*

Tire Liner for tires 20-29 inch , width 100 mm / ~3,94 inch CLSBND100x13x235

Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 100 mm (~3,94 inches) Thick: 1,3 mm (~0,051 inches) Length: 2350 mm (~ 92,52 inches) ~ 400 g (~ 0,88 lbs) Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€18.95*