Front geared hub motor 250W for ebike

€69.95*

% €249.95* (72.01% saved)
Product number: XF1403FB0473
Product information "Front geared hub motor 250W for ebike"

XOFO Front geared hub motor 250W for ebike

General:

The front motor is mounted in the bicycle fork in the front wheel. Since the motor is at the front and the battery is usually at the rear, the bike has a good weight distribution. This allows the bike to be ridden easily and to be optimally balanced. The switched-on motor pulls the bike forward as soon as you start pedalling. This makes it possible to get going quickly.

 
Technical details:
  • Type: Geared Motor with freewheel
  • Voltage: 36V
  • Rated Power: 250W
  • Max Speed:  25 km/h
  • Torque max: 30 N.m
  • Maximum Efficiency: ≥ 81
  • Wheel Size: 24 - 29" 
  • Diameter Motor: ~ 120 mm / 4,72 inches
  • Installation width: 100 mm / 3,94 inches
  • Weight: ~ 2,7 kg / ~ 5,95 lbs
  • Motor connection: 9-Pin
  • Working Temperature: -20°C - 45°C
  • Spokes: 12G + 13G
  • Spoke holes: 36 holes
  • Brakes:  Rimbrake and Discbrake
  • Cable position:  right
  • Mounting:Quick release
  • Color: Silver

Hint: The Motor is marked with 26" wheel size. Fits to 24" to 29" wheels as well.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Mini bell sounding body made of copper, innovative and beautiful, black 420451
Innovative and beautiful mini bell made of copper very loud and long lasting sound (100dB) body made of copper diameter 30 mm / 1,18 inch innovative assembly using 2 different fastening clamps 22.2 - 40 mm / 0,87 - 1,57 inch in diameter weight 48 g / 0,11 pounds incl. rubber inlay colour black For the assembly, only the upper screw is loosened with the help of an Allen key. Choose the appropriate fastening clamp and tighten everything again.  

€12.95*
Spacer ring aluminium Ø 35 mm, 3 mm high, black UD-SPA-35-3
Spacer ring aluminium Ø 35 mm, 3 mm high, black Inner diameter: 35 mm / 1.38 inches Outer diameter: 42 mm / 1.65 inches Height: 3 mm / 0.12 inches Colour: black Material: aluminium

€0.99*
%
UDX BMX handlebar, black shorty UDX-BMX-HAN-SHO
UDX BMX handlebar, black shorty 610 mm wide rise 22 cm Hi-Ten steel Stem mount: 22.2 mm Distance between the mount and the topbar: ~ 140 mm Diameter topbar: ~ 22.2 mm Original handlebar from the UDX Bike Series by Urban Drivestyle Berlin!

€24.95* €32.95* (24.28% saved)
New
UD special headset Ahead 1 1/8 inch black UD100
UD special headset Ahead 1 1/8 inch black durable and high quality 1 1/8" headset Ahead for 1 1/8 inch shaft diameter color: black  sealed roller bearings Outer diameter bearing shell: 44 mm Original headset for the UDX from Urban Drivestyle in Berlin Not suitable for forks with threaded shaft!

€29.95*
Tire Fat Bike Classic Cycle Zig Zag 20 x 4.0 97/102-406 ZZ204BKBK
204 Bike Tire Classic Cycle Zig Zag 20 x 4.0 97/102-406 27 TPI  New Over Ride Endurance Compound E-Bike Ready 50 ECE-R75 max load = 155kg/pc About 87 - 105 mm (~3,42 - 4,13 inches) wide on a 82 mm (~3,22 inches) rim. About 110 mm (~4,33 inches) wide on a 102 mm (~4,01 inches) rim. This tire fits on all 20" Classic Cycle rims from 60 to 102 mm (~2,36 to 4,01 inches) width! But please check frame/fork for clearance! The pictures shows the new Zig Zag Tire assembled on a 102 mm (~4,01 inches) wide rim. Diameter complete: 595 mm + / - 20 mm (~23,42 +/- 0,79 inches) concerning to pressure and rim diameter. Weight: 1810 g (~ 4 lb) If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast. 1 piece Tube recommendation: For rim widths up to 102 mm (~4 inches): 26 x 4.0 tube. For wider rims: till 26 x 5.0 tube

€59.95*
Fat Bike Cartridge B.B. Set for 120mm housing BOT-BRA-UNI-120
Fat Bike Cartridge B.B. Set for 120mm housing black for 120 mm bottom bracket housing total length (L1): 180 mm (~7,08 inches) L2: 32 mm  (~1,26 inch) ~ 400 gr. BSA, JIS sealed bearings compatible with Shimano tools

€15.95*