Mounting rail for SilverFish saddle tube batteries

€9.95*

Product number: UD13339
Product information "Mounting rail for SilverFish saddle tube batteries"

Mounting rail for SilverFish tubular saddle battery / tubular saddle battery

Details:

  • total width: ~30 mm
  • width of rail: ~ 16 mm
  • length: ~ 390 mm
  • colour: black

Original part from Urban Drivestyle Berlin!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

E-bike battery base plate UD13315
Battery base plate for e-bike Dimensions: ~ 107 mm x 75 mm Distance between mounting holes (measured hole centre to hole centre): long side: ~ 60 mm short side: ~ 55 mm Base plate material: PC + ABS A matching self-adhesive seal / padding and the battery contacts can be purchased separately. Original part from Urban Drivestyle Berlin!

€8.95*
Seal for battery base plate UD13317
Seal for battery base plate suitable for article UD13314 and UD13315 self-adhesive Original part from Urban Drivestyle Berlin!

€3.95*
E-bike battery base plate with battery contacts UD13314
Battery base plate with battery contacts for e-bike Dimensions: ~ 107 mm x 75 mm Distance between mounting holes (measured hole centre to hole centre): long side: ~ 60 mm short side: ~ 55 mm Seal / padding glued to the rear side Base plate material: PC + ABS cable length: ~ 200 mm Original part from Urban Drivestyle Berlin!

€14.95*
Battery contacts for e-bike UD13316
Battery contacts for e-bike cable length: ~ 200 mm A base plate for the battery and the matching self-adhesive seal / padding can be purchased separately. Original part from Urban Drivestyle Berlin!

€9.95*

Customers also bought

E-bike battery base plate with battery contacts UD13314
Battery base plate with battery contacts for e-bike Dimensions: ~ 107 mm x 75 mm Distance between mounting holes (measured hole centre to hole centre): long side: ~ 60 mm short side: ~ 55 mm Seal / padding glued to the rear side Base plate material: PC + ABS cable length: ~ 200 mm Original part from Urban Drivestyle Berlin!

€14.95*
Controller box, electronics box with seal for e-bike UD543
Controller box, electronics box with seal for E-Bike Uni Moke and Swing The controller box is made of robust plastic. In addition to attaching the controller to your e-bike, it also protects it. Dimensions: Outer dimension: ~ 21cm x 10.7cm x 3.4cm Inner dimensions: ~ 15.5 cm x 8.2 cm x 2.5 cm The box can be fitted to the frame of the Urban Dirvestyle Uni Moke and Swing bikes. It is screwed to the frame from below with the help of 4 screws. The cables are pulled upwards into the frame. The scope of delivery includes the controller box and the matching self-adhesive seal.

€19.95*
Seal for battery base plate UD13317
Seal for battery base plate suitable for article UD13314 and UD13315 self-adhesive Original part from Urban Drivestyle Berlin!

€3.95*
E-bike battery base plate UD13315
Battery base plate for e-bike Dimensions: ~ 107 mm x 75 mm Distance between mounting holes (measured hole centre to hole centre): long side: ~ 60 mm short side: ~ 55 mm Base plate material: PC + ABS A matching self-adhesive seal / padding and the battery contacts can be purchased separately. Original part from Urban Drivestyle Berlin!

€8.95*
HIGO / Julet adapter cable 19,5 cm for ebike, 2 PIN red to 3 PIN yellow HIG-ADA-2T3-BRA
Extension cable for Ebike Technical data: Connector: HIGO / Julet yellow 3PIN male, red 2 PIN female Water resistance: IP65 Cable length: 19,5 cm / 7,67 inches Plug connection: yellow male, red female Outer material: ABS plastic brake sensor adapter General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€7.95*
H7 LED headlight bulb 12V for e-bikes and motorbikes LED-BUL-12V
H7 LED headlight bulb 12V for e-bikes and motorbikes You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride! Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine! Properties of the H7 LED Standard H7 base Power: 7W Voltage: 12V Light colour: 6000K Individual under E-bikes Super white light Extra long life Low power consumption  Original accessories from Urban Drivestyle Berlin!

€14.95*