Dished Sprocket, 10 mm (~0,39 inches) offset, 22 Teeth black
1/2 x 1/8
22 Teeth
helps to bring the chain about 10 mm (~0,39 inches) out
Depth: ~ 15 mm (~0,59 inches)
Spade Pedals
Black sand, silver Aluminium
9/16 inch thread, pair
Sealed bearing
CroMo Axle
Weight 390 g. /pair
Perfect Quality
For your information:
9/16 inch ~ 14.3 mm - for three-piece crank
Tire Kenda Flame 26 x 3.0
68-559
THE ultra fat custom tire with flame tread!!!
With the classic Kenda-Flame inscription on the side wall.
The ultimate custom cruiser and lowrider tire for maximum show performance!
about 67 mm (~2,64 inches) wide and 62 mm (~2,44 inches) high (above the rim)
This tire fits on all 26" Classic Cycle rims up to 80 mm (~3,15 inches) width! But please check frame/fork for clearance!
If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast.
Dished Sprocket, 10 mm (~0,39 inches) offset, 18 Teeth
1/2 x 1/8
helps to bring the chain 10 mm (~0,39 inches) out
Fits to shimano, sachs, sram, stumey archer 3-speed hubs, histop, ... etc.
Depth: ~ 15 mm (~0,59 inches)
inner diameter: 35 mm
Demon Fork TSP Custom Fork
Exceptional Custom Fork for all rims up to 102mm (~ 4 inches) width. Innovative, italian Design connects rolling easiness with reliable stability. TSP sets new standards and shows again manual perfection. Multifunctional, nice shaped axle mounts complete this special attention getter on your custombike!
Raw unlaquered
for 20 till 28 inch tires
up to 102 mm (~4,01 inches) rim width
1 1/8 inch shaft
Length of shaft: 240 mm (~9,45 inches) - can be cutted down to 80 mm (~3,15 inches)
Brake mounts for disk
Length over all: 705 mm (~27,75 inches)
Distance between axle mount and lower bridge 406 mm (~15,98 inches) (26 inch axlel mount), 377 mm (~14,84 inches) (24 inch axle mount).
Diameter of fork tubes: 32 mm (~1,26 inches)
Width between fork tubes: 144 mm (~5,67 inches)
Width at axle mount: 100 mm (~3,94 inches)
The forks were developed for the 100 mm (~3,94 inches) rims.
Length of shaft and fork tubes are shortable.
Comes with end cover plugs for the fork tubes.
Made in Italy
€179.95*
This website uses cookies to ensure the best experience possible. More information...