Cartrige B.B. Set alu Caps

€17.95*

Product number: 359263
Product information "Cartrige B.B. Set alu Caps"

Cartrige B.B. Set BSA

  • alu caps
  • Silver CrMo hollow axle
  • max torque 58 NM
  • 115/24mm (~4,53/0,94 inches)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Conversion Kit OPC to BSA Y285
American-to-Euro Conversion kit These beautifully machined aluminum bushings fit into the shell of a one-piece-crank bottom bracket, and are threaded to accept a: standard threaded bottom bracket normal 68 mm (~2,68 inches) width. 3 long CrMo bolts connect the two bushings to one another for a secure mounting.

€21.95*

Customers also bought

Conversion Kit OPC to BSA Y285
American-to-Euro Conversion kit These beautifully machined aluminum bushings fit into the shell of a one-piece-crank bottom bracket, and are threaded to accept a: standard threaded bottom bracket normal 68 mm (~2,68 inches) width. 3 long CrMo bolts connect the two bushings to one another for a secure mounting.

€21.95*
Tube 26 x 3.0 AV Y943
Tube 26 x 3.026 x 3.0 AV for wide tireswith car / auto valve

€13.95*
Bottom Bracket BSA Shell Steel raw GB104
Bottom Bracket BSA Shell Steel Raw outer diameter ~ 40 mm (~1,57 inches) inner diameter: ~ 34 mm ( ~ 1,34 inches) Length: ~ 68 mm (~2,68 inches)

€10.95*
New
Crankset Crystal 44 T black 6115
Crankset Crystal steel 2 pieces black 44 Teeth 170 mm (~6,69 inches) alloy crank length with 9/16 thread pedals for 1/2 x 1/8 Chains

€31.95*
Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches)  Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*
Tip
Streetking Whitewall Balloon Tire 26 x 2.125 57 x 559 Y250
Streetking Whitewall Balloon Tire 26 x 2.125 57 - 559 nostalgia whitewall tire for the ultimate old school look! width of inflated tire: 55 mm (~2,16 inches) This tire fits on all 26" Classic Cycle rims up to 75 mm (~2,95 inches) width! But please check frame/fork for clearance! If you assemble the tire on wide rims not to put more pressure than 16 PS. It could blast.

€29.95*