UD fender strut for 20 inch fatbike
Product information "UD fender strut for 20 inch fatbike"
Urban Drivestyle mudguard stay for 20 inch fatbike
- Mudguard strut, overflowing (1 piece)
- for 20 x 4 inch
- Material thickness: ~ 4 mm / 0,157 inches
- Inner width: ~ 135 mm / 5,35 inches
- Length of straight strut - measured vertically from apex to centre of mounting hole: ~ 280 mm / 11,02 inches - Mounting holes Ø: ~ 6 mm / 0,24 inches.
- Original accessories Urban Drivestyle! The strut was used as an additional mounting for the Uni Boost mudguard.
- Can also fit other 20 x 4 fatbike bikes such as Tucano Monster, B - Bob, Sondors Fold, etc. ... - Please note the dimensions!
Login
Cutsomers also bought
Lock-On handlebar grips black plastic
PM1001366
€16.95*
Lock-On handlebar grips in black plastic
Details:
1 pair
Length ~ 130 mm
Fits handlebars with 22 mm diameter.
Colour: black
The rubberised surface ensures optimum grip!
With the help of two aluminium clamping rings, the grip is securely screwed to the handlebar and makes twisting impossible.
Includes: 2x plastic caps to close the handlebar ends, 1 pair of plastic grips, 4x aluminium clamping rings to fix the grips.
Original accessories from Urban Dirvestyle Berlin!
Tannus Armour puncture protection, 20 x 3.5 - 4.0
519134
€49.95*
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 75-100 x 406 / 20" x 3.5 - 4.0
*Tube - 60 - 115 x 406 / 20 x 2.4 - 3.0
Rim - 50 - 102 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 350 g
scope of delivery: 1 piece
*Attention: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 2.5 - 3.0 is recommended.
Tektro brake pads organic for disc brakes E10.11 green
UD.E1011
€9.95*
Tektro brake pads organic for disc brakes E10.11 green(organic) especially low noise - slightly higher wearThe Tektro brake pad pair is compatible with both cable and hydraulic brakes of the Uni MK series.hydraulic brakes of the Uni MK, as well as for other bikes and e-bikes.Compatible only for Tektro 350e brakeScope of delivery: two brake shoes and one spring clip
Rim tape Cut Out 26 inch, 75 mm wide, black
Y735
€9.95*
Wide rim tape 26 inch, black
Wide and durable nylon rim tape, especially suitable for rims with cut outs.
Details:
Material: nylon
Width: 75 mm / 2,95 inch
Length: approx. 850 mm / 33,45 inch double laid
Colour: black
Design: closed rim tape with valve hole
General information:The rim tape protects the tube from damage by the rim. Spoke nipples, rim holes and possible metal burrs of the rim could otherwise damage the bicycle inner tube. Rim tapes are placed around the rim and are made of durable and sturdy material. Assembly:The rim tape is closed and is pulled onto the wheel with appropriate tension and then moved into position.
%
Tire Liner for tires 20-29 inch , width 80 mm / ~3,15 inch 50 m 1 Roll
CLSBND80x11roll
€279.95*
€339.50*
(17.54% saved)
Tire Liner for tires 20-29 inch
Easy installing between Tube and Tire.
Tire Liners are reusable and are made of PUR POP material.
They will provide a lifetime of protection from puncture caused by sharp objects.
One Roll
Width: 80 mm (~3,15 inches)
Thick: 1,1 mm (~0,043 inches)
Length: 50 m ( ~ 164 ft)
Assembling instruction:
Remove the wheel and let the air out of the tube.
Remove tire and tube from rim.
Make sure that the inside of the tire is free from sharp bodies.
Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm.
Please shorten to the required length.
Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire.
The puncture protection insert is fixed by the tube.
Mount the tire and tube on the rim and inflate to the desired tire pressure.