Busch + Müller rear light µ E for Ebike
Product information "Busch + Müller rear light µ E for Ebike"
Busch + Müller rear light µ E for Ebike
Small, stylish and bright - The smallest, road-legal rear light. µ [my:], pronounced mü. Minimalist and in a high-quality aluminium housing from the renowned light manufacturer Busch + Müller.
The µ is small, efficient and offers very good all-round visibility despite its small size. It is based on 12V voltage and impresses with its filigree, simple design. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included.
Features of the rear light
-
Material: Anodised aluminium housing, plastic
-
Power: < 2W
-
Voltage: 5-15 V
-
Colour: black
-
Diameter (luminaire): 19mm Ø
-
Length: 20mm
-
With German E-mark (not approved for vehicles subject to registration plate requirements)
-
Includes: LED tail light & attachments
-
Please refer to the manual below for further technical details.
Login
Accessory Items
%
Philips LED E-Bike front lamp, silver, handlebar mount
EF60L55BAH
€14.95*
€44.95*
(66.74% saved)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in silver (brushed aluminium)
Handlebar bracket interface
For further data, please see the datasheet below.
%
Philips LED E-Bike front lamp, black with reflector, fork mount
EF60L55BBL
€14.95*
€44.95*
(66.74% saved)
PHILIPS LED front lamp for E-bike
SafeRide® E-bike driven 60
The Philips SafeRide LED eBike is the world's smallest LED bike light that meets the legal requirements of a motorbike headlight.
It can therefore be used on any e-bike or moped or motorbike up to 125 cc. Until now, only large and heavy headlights with incandescent lamps and a power consumption of 15 watts could be used for e-bikes.
The extremely compact LED eBike light generates an extremely wide and far-reaching light beam on the road with a power consumption of only 5 watts. Due to the optimised cut-off line, oncoming traffic is not dazzled.
The Philips SafeRide LED eBike can be operated at any input voltage between 6 V and 12 V and can be attached to any handlebar or fork of an e-bike or moped. Like all products of the Philips LED BikeLight family, the LED eBike light is equipped with an all-aluminium housing. The excellent heat management properties of the aluminium ensure that the light intensity and light colour of the two LEDs remain constantly bright and white even during continuous operation at the highest light level.
Furthermore, all Philips SafeRide bicycle lights are characterised by three technology modules:
All products contain two LUXEON® high-power LEDs, which ensure that Philips products provide more light than most other LED bike lights on the market. These are the same LEDs used by leading car manufacturers.
This is only possible through the use of an all-aluminium housing.
In addition, Philips products use a free-form reflector for optimum light distribution and glare-free operation. Only the combination of these factors enables a small design with which maximum light values can be achieved within the meaning of the StVZO.
Details:
Powered by automotive LUXEON® Altilon LED
Light source: 2x 60 LUX LEDs
160 lumen in the beam
Crystal white light (5500K)
Extra wide illumination
Up to 50 metres homogeneous road illumination
Foreground illumination
Glare free beam (StVZO in Germany)
Fulfills international motorcycle standard ECE R113 Class C
StVZO certification
Operates on 5 - 48V DC, 5W
Finish
Waterproof aluminium housing in black
Retroreflector integrated into holder with K-approval
Fork mounting interface
For further data, please see the datasheet below.
HIGO / Julet extension cable 30 cm for ebike, 2 PIN female
HIG-POL-2ADR-FEM
€6.95*
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / 1x Julet female, 1x open end
Water resistance: IP65
Cable length: ~ 30 cm
Plug connection: 1x red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
Customers also bought
Tip
204 E-Speedster Whitewall Tire 20 x 4 inch
VRESP204WW
€57.95*
204 E-Speedster Whitewall Extra Wide Tire 20 x 4
The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. The honeycomb feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air
102 - 406
26 TPI
Edurance Compound
E-Bike 50, ECE - R75
8-20 PSI (0.6 - 1,4 bar)
For custom and chopper bikes like the Schwinn New Stingray.
This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance!
On a 82 mm (~3,,22 inches) rim the tire is about 105 mm (~3,66 inches) wide and it will 72 mm (~2,83 inches) protrude over the rim.
Total external diameter: ~590 mm (~23,22 inches) - May vary because of pressure.
Weight: ~ 1,4 kg (~2,6 pounds)
If you assemble the tire on wide rims not to put more pressure than 20 PSI. It could blast.
This offer includes 1 piece only
UD black crankset LASCO 152 mm, square, 52 teeth
UD1952
€39.95*
UD black crankset LASCO 152 mm, square, 52 teeth
black steel chainring with 52 teethblack aluminum crankspedal arm length 152 mm for pedals with 9/16 threadblack aluminium chain guardThe crankset is suitable for a square axle!With 2 pieces of axle - end bolts
HIGO / Julet extension cable 30 cm for ebike, 5 PIN female to male, green
HIG-LIG-030-G
€8.95*
Extension cable for Ebike
Technical data:
Connector: 5-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 30 cm / 11,81 inches
Plug connection: green
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
New
Front headlight for motorbike or e-bike 6 1/2 inch glossy black
223-078-GS
€69.95*
Large headlight for motorbike or e-bikeUNI MK headlightDetails:Asymmetrical 6 1/2 inch headlightHousing and lamp ring in glossy blackClear glass plastic lensH4 insert with parking light (without H4 bulb and its socket)M8 mounting holes on the sideThe parking light is connected via two open cable ends.This headlight was also fitted to the UNI MK bikes at Urban Drivestyle!Dimensions :Glass diameter: ~ 176 mm (6 1/2 inch)Outer diameter: ~ 190 mmTotal depth: ~ 150 mmDepth from mounting: ~ 90 mmDiameter between the fixing holes: ~ 170 mmCable length: ~ 10 cmWeight: ~ 740 gApproval:With E-approval.The headlight has an E4 approval mark and does not require any further documents.It can therefore be installed without further ado in accordance with the installation regulations.Please order accessories separately:LED lamp Art. No.: LED-BUL-12V or UD3597 Conversion to e-bike typical HIGO connections: HIG-POL-2ADR-FEM or HIG-POL-2ADR-MALNote:Many customers use the headlight in combination with a 12V starter battery for scooters or motorbikes.
HIGO / Julet extension cable 5,5 cm for ebike, 2 PIN female to male, red
HIG-LIG-005
€7.95*
Extension cable for Ebike
Technical data:
Connector: 2-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 5,5 cm / 2,16 inches
Plug connection: red
Outer material: ABS plastic
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.