hebie eFIX 40 bike stand / parking stand
self-folding rear bike stand
direct mounting on the frame by KSA 40 (special adapter on the chain stay)
Hole spacing 40 mm, with thread
optimal stand thanks to the wide foot
suitable for 26 and 28 inch wheels
continously adjustable length without tools
Material: steel (coated)
Load capacity: 25 kg
Weight: approx. 320 g
Color: Black
The stand folds in automatically when the bike is brought into the riding position. It is suitable for pedelecs and e-bikes from 26 to 28 inches - also for those that reach a speed of 45 km / h and require approval.
The Tannus Armour is an effective 3-in-1 puncture protection system!
By mounting it between tire and tube, the tube is enclosed by 360 degrees right into the rim bed and thus offers protection for the treads, sides and rims.
Puncture Protection for:
Tire - 75-100 x 406 / 20" x 3.5 - 4.0
*Tube - 60 - 115 x 406 / 20 x 2.4 - 3.0
Rim - 50 - 102 x 406
The all-round protection against punctures, cuts and pinching.
up to 15 mm at the tread, 3-5 mm at the sides and 2 mm in the rim area
free tire and tread selection
very light and reusable
support for the entire tire: even at lower air pressure, the Armour works against deformation by lateral forces, allowing greater grip and better traction
reduces the risk of snake bites (e.g. by a strong impact)
patented Aither 1.1 technology: very lightweight high-tech polymer foam with millions of bubbles provides shock and vibration damping
With flattened tube you can continue riding at reduced speed for a short period on flat paths.
easy mounting
anti-pinch protection for tube mounting
universal sizes for several widths
If necessary, the lips of the Tannus Armour can easily be shortened to the desired length with scissors.
recyclable
weight: 350 g
scope of delivery: 1 piece
*Attention: The puncture protection insert requires a smaller tube size due to its space requirement in the tire. Here a tube size of 20 x 2.5 - 3.0 is recommended.
Rivets saddle green with 6 stainless steel rivets
Sporty all-rounder
green synthetic leather, 6 stainless steel rivets, black steel frame on plastic base, suitable for patent seat post
dimensions: about 153 x 278 mm (~6,02 x 10,94 inches)
in combination with item 250790 also suitable for standard seat post
20 inch Fat Bike Fender Set Fender Stays 123 mm width
123 mm (~4,84 inches) wide, 20 inch., matte black
complete fender set for 20 inch fat bikes or similar bike types
Width: 123 mm (~4,84 inches)
Hight: 30 mm (~1,18 inches)
Diameter inside: ~ 480 mm (~18,9 inches)
Diameter outside: ~ 530 mm (~20,87 inches)
Rear lenght in circumference: ~890 mm (~35,04 inches)
Front length in circumference: ~ 590 mm (~23,23 inches)
Steel powder coated flat black
Weight: ~ 1,8 kg (~3,97 pounds)
On chainside of the rear fender you will find a benting to give way to the chain.
Hailong battery rail / battery holder, 5-pin for spare battery Do you want to carry a spare battery on your e-bike? This is easy and hassle-free thanks to an additional battery holder / battery rail, which can be mounted on the mounting points of the cup holder, for example. The battery holder offers space to integrate a controller. 5 contacts for battery holder Can be mounted at mounting points on the frame, e.g. on the cup holder Compatible with the Hailong battery from our range. Original component from Urban Drivestyle Berlin!
Translated with DeepL.com (free version)
€14.95*
This website uses cookies to ensure the best experience possible. More information...