9/16 to 1/2 Pedal Thread Adaptors

€23.95*

Product number: Z-1321
Product information "9/16 to 1/2 Pedal Thread Adaptors"

9/16" to 1/2" Pedal Thread Adaptors

  • Black, CRO MO
  • These adaptor bushings have a male 9/16"-20 thread to fit into your BSA crank, and a standard 1/2"-20 female thread that will let you install standard 1/2" pedals.
  • These install with a 15 mm (~0,59 inches) pedal wrench.
  • Length over all 32 mm (~1,26 inches)
  • Brings the pedal 21 mm (~0,83 inches) more out
  • Weight 54 gr. (~0,12 pounds) /pair
  • Perfect Quality
  • 9/16 Zoll = 14.28 mm
  • 11/20 Zoll = 14 mm
  • 1/2 Zoll = 12.7 mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

1/2 to 9/16 Pedal Thread Adaptors Z-1320
1/2" to 9/16" Pedal Thread Adaptors Black, CRO MO These adaptor bushings have a male 1/2"-20 thread to fit into your one-piece crank, and a standard 9/16"-20 female thread that will let you install standard 9/16" pedals, even modern clipless pedals. These install with a 15 mm (~0,59 inches) pedal wrench. Length over all: 32 mm (~1,26 inches) Brings the pedal 21 mm (~0,83 inches) more out Weight 54 gr. (~0,12 pounds)/pair Perfect Quality 9/16 Zoll = 14.28 mm 11/20 Zoll = 14 mm 1/2 Zoll = 12.7 mm

€23.95*
Iron / Maltese Cross Pedals black 1/2 KG-P024H-1-2
Iron / Maltese Cross Pedals 1/2 Black, Aluminium 1/2 inch thread, pair Screwed pins Sealed bearing CroMo Axle Weight: 480 gr. (~1,06 pounds) /pair Perfect Quality for one piece crank / OPC The article is also available in 9/16 inches. Please check which size you need. For your information: 1/2 inch ~ 12.7 mm - for one-piece crank 9/16 inch ~ 14.3 mm - for three-piece crank

€109.95*
Tube 26 x 3.0 AV Y943
Tube 26 x 3.026 x 3.0 AV for wide tireswith car / auto valve

€13.95*
%
Stickshifter for Shimano 3 speed 34601SH
Stickshifter for Shimano 3 speed Solid stickshifter made of partial polished steel with black nicely moulded plastic knob complete length: 14,5 cm width of mount: 6,3 cm speeds snap into place mounts with two wholes for frame assembling This gear lever was previously imported and distributed by The Chopperdome of 1055 LZ Amsterdam, Admiraal de Ruijterweg 346.

€39.95* €49.95* (20.02% saved)
Tire Liner for tires 20-29 inch , width 80mm / ~3,15 inches CLSBND80x11x235
Tire Liner for tires 20-29 inch Easy installing between Tube and Tire. Tire Liners are reusable and are made of PUR POP material. They will provide a lifetime of protection from puncture caused by sharp objects. One Piece Width: 80 mm (~3,15 inches)  Thick: 1,1 mm (~0,043 inches) Length: 2350 mm (~ 92,52 inches) ~ 255 g ( ~ 0,56 lbs)   Assembling instruction: Remove the wheel and let the air out of the tube. Remove tire and tube from rim. Make sure that the inside of the tire  is free from sharp bodies. Place a puncture protection insert in the tire. The ends can overlap by 7 - 10 cm. Please shorten to the required length. Inflate the tube a little (0,5 BAR / 7 PSI) and place back in the tire. The puncture protection insert is fixed by the tube. Mount the tire and tube on the rim and inflate to the desired tire pressure.

€15.95*
New
Apehanger Shorty Handlebar Y675
Apehanger Shorty Handlebar chrome-plated Hi-Ten steel  dimensions: about 800 x 450 mm (~31,5 x 17,72 inches) for 22,2 mm (~0,87 inches) stems The decent cruiser chopper apehanger!

€39.95*