Stem 25,4 - 25,4 Steel black Humpert Ergotec CV 101

€9.95*

% €19.94* (50.1% saved)
Product number: 30648000
Product information "Stem 25,4 - 25,4 Steel black Humpert Ergotec CV 101"

Stem Steel black sand. Humpert Ergotec CV 101

Original NOS from Humpert Germany

NOS= New Old Stock

Oldschool 70-90s

  • black
  • Handlebar mount with single bolt: 25,4 mm (~1 inch)
  • 25,4 mm (~1 inch) shaft
  • 150 mm (~5,90 inches) shaft height
  • 60 mm (~2,36 inches) nosing with 15° angle

Using a single bolt mount won't recommend handle bars with big hights.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Chain 1/2 x 1/8 stainless 10 cm Y354
Chain 1/2 x 1/8 stainless steel 0,99 € per 10 cm (~3,94 inches) how to order:100 cm (~39,37 inches) needed = 10 x 10 cm (~3,94 inches) = 10 x 0,99 €, when 150 cm needed (~59,05 inches) = 15 x 10 cm (~3,94 inches)  = 15 x 0,99 € including one locking element (shackle) per chain Chains cut to length on customer order are nonreturnable!

€0.99*
Dished Sprocket 10 mm offset 18 T Y599
Dished Sprocket, 10 mm (~0,39 inches) offset, 18 Teeth 1/2 x 1/8 helps to bring the chain 10 mm (~0,39 inches) out Fits to shimano, sachs, sram, stumey archer 3-speed hubs, histop, ... etc. Depth: ~ 15 mm (~0,59 inches) inner diameter: 35 mm

€9.95*
Cartrige B.B. Set alu Caps 359263
Cartrige B.B. Set BSA alu caps Silver CrMo hollow axle max torque 58 NM 115/24mm (~4,53/0,94 inches)

€17.95*
New
Sting-Ray Handlebar black 670sw
Sting-Ray Handlebar Black for the Sting-Ray or similar cult bikes of the 60s and 70s black steel dimensions: about 660 x 350 mm (25,9 x 13,78 inches) for 22 mm (0,87 inches) stems

€32.95*
%
Stem 25,4 - 22,2, Steel cp Humpert Ergotec CV 100 30604000
Stem Steel CP Humpert Ergotec CV 101 Original NOS from Humpert Germany NOS= New Old Stock Oldschool 70-90s CP steel Handlebar mount with single bolt: 25,4 mm (~1 inch) 22,2 mm (~0,87 inches) shaft 150 mm (~5,90 inches) shaft height 80 mm (~3,15 inches) nosing with 25° angle Using a single bolt mount won't recommend handle bars with big hights.

€9.95* €19.94* (50.1% saved)
Side Pull Caliper Front Brake Alu PFK-054
Side Pull Caliper Front Brake Alu complete with cable and lever aluminium alloy caliper The holes to mount the brakepades are 20 mm (~0,79 inches) long. So the distance between axle and brake pad mounting point is between 80 - 100 mm (~3,15 - 3,94 inches)

€15.95*