HIGO / Julet extension cable 50 cm for ebike, 2 PIN female to male, red

Classic Cycle

€8.95*

Prices incl. VAT plus shipping costs

Product number: HIG-LIG-050

Product information "HIGO / Julet extension cable 50 cm for ebike, 2 PIN female to male, red"

Extension cable for Ebike

Technical data:

Connector: 2-pin HIGO / Julet (1x male - 1x female)
Water resistance: IP65
Cable length: 50 cm / 19,68 inches
Plug connection: red
Outer material: ABS plastic

General information:

HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.

A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.

Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

HIGO / Julet extension cable 100 cm for ebike, 2 PIN female to male, red HIG-LIG-100

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 100 cm / 39,37 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€9.95*

12V Converter / DC Converter 48V Higo LIG-CON-48V-HIG

DC converter / voltage transformer with HIGO / Julet connections Input: 7 - 60 VDC Connector: 1x 2-pin HIGO / Julet female, red Output: 12V / 1000 mA Connector: 2x 2-pin HIGO / Julet male, red Total length incl. plug: ~ 30 cm Converter size: 43 x 21 x 10 mm General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*

E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination G3150

E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination Good looking design and best quality The E-Bike rear light to mount on frametube or carrier with LED technology. Operates with Julet Mini connectors 2 pins to battery controller Equipped with powerful LEDs Alu casing black matte with red lens and guard Length: 90 mm (~3,54inches) Hight: 59 mm (~2,32 inches) Width: 65 mm without screws (~ 2,56 inches) Cable length ~ 500 mm (~ 16,68 inches)

€74.95*

MXUS KT LCD Display KT-LCD4 KT-LCD-KT-LCD4

MXUS KT LCD Display KT-LCD4 Technical specifications Type of display: LCD Display: Matrix Display Rated Voltage(DCV): 36/43/48 Support Modes: 0-5 Operating Temperature: -20 - 45℃ Weight: ~ 45gCuts out at 27 km/h Installation parameter Bus system: UART Dimensions 54 x 19 mm Handlebar diameter: Ø 22.2 mm Cable Length: ~ 370 mm Connector Type: Jullet 5 PIN, Male, green Display indications Current speed (km/h) Maximum speed (km/h) Average speed (km/h) Duration of single trip Distance of single trip Total Distance Reset single trip Duration Reset single trip Distance Capacity Error code display Walk Boost Backlight Tests & Certification IP code: IP X5 certifications: CE / EN 15194 / REACH / ROHS

€34.95*

UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG

UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*