Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches

€24.95*

Product number: CAB-TRE-1T4-MK-118
Product information "Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches"

Wiring harness 1T4, Bafang compatible

Technical data:

  • Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
  • Compatible with Bafang hub motors
  • Waterproof plugs / connectors
  • Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches
  • Connections:
    • 1x male 3-PIN Julet connector yellow for throttle / thumb throttle.
    • 1x male 5-PIN Jullet connector green for display
    • 2x female 3-PIN Jullet connector yellow for shift / brake sensor
    • 1x male 8-PIN Jullet connector black for controller

General information:

HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.

A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.

Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Wiring harness 1T5, waterproof, 56 cm / 22,05 inches CAB-TRE-1T5-056
Wiring harness 1T4 Technical data: Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display Waterproof plugs / connectors Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches Connections: 3x female 3-PIN Jullet connector yellow 1x female 5-PIN Jullet connector green 1x male 2-PIN Jullet connector red 1x male 9-PIN Jullet connector black General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€24.95*
204 MXUS Motor 500 W rear wheel complete 20 x 4 - 80 mm wide UD-1
204 MXUS Motor 500W Rear wheel complete with tire and tube 20 x 4 - 80 mm wide 20 inch Fat Bike rear wheel black matte anodized alu rim, 36 Spokes 2,6  mm black disc brake mount 44 mm 6 holes over locknut dimension: 190 mm rim width: 80 mm ready assembled with rim tape and tube  with Innova allround tire 20 x 4 weight: ~ 7450 g This Items was produced for Urban Drive Style UDX Model   Specification of the Motor Hub Model number GDR-15FAT-1 Position Rear Construction Gear Rated voltage(V) 48 Rated Power(W) 500 Weight(kg) 4.15 Reduction Ratio 1:5 Wheel Diameter(inch) 20 Rated speed(km/h) 25-40 Magnet Poles(2P) 10 Dropout(mm) 190 Brake Type V/Disk brake Operating Temperature © -20 - +45 Efficiency(%) ≧78% Color Black Cabling Route Shaft center LEFT Noise Grade(dB) ≤55 IP Grade IP54 Salt Spary Test Standard(h) 24/96

€289.95*
Seat Post Clamp 35 mm Alu matt glossy UD13349
Seat Post Clamp 35 mm (~1,37 inches) Alu matt glossy Product details: Colour: matt glossy Material: aluminium Inner diameter: 35 mm (~1,37 inches) Details: with Allen screws Mounting position: mounting on the seat tube Original accessories from Urban Drivestyle Berlin!  

€4.95*
Alu rim 20 inch 102 mm high black matte JSR20102bk
Aluminium Alloy Rim 20 inch., 102 mm (~4,01 inches) wide ETRTO: 406 double wall 102 wide: 102 mm (~4,01 inches) Inner size: 95 mm (~3,74 inches) holes: 36 colour: Black matte Rim diameter for calculating the spoke length: 383 mm (~15,08 inches) Weight: 1100 g (~2,42 pounds)    

€41.95*
UD Classic Taillight LED 12V for E-Bikes BAC-LED-BLA-HIG
UD Classic Taillight LED 12V for E-Bikes This classic moped tail light, fits perfectly to the vintage design of your UNI MK! The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included. Note: Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models. Not compatible with UDX mid-engine version which only has a 6V light output. Features of the rear light Material: steel Power: 2W Voltage: 12V Colour: black Vintage design accentuates UNI MK's moped look Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage. Includes: LED tail light, mounting parts with European approval (E4) Original accessories from Urban Dirvestyle Berlin!

€59.95*
UD Seat latch plastic clip SEA-LOC-ANG
Seat latch plastic clip This elongated plastic part holds the seat of your UNI MK closed. It is attached to a frame strut with one/two M4 bolts (depending on the year of manufacture of the bike) so that the seat can lock into place. It is compatible with all UNI MK versions from V1 onwards and all mounting parts are included. Material: Moulded plastic Colour: Black Dimensions: 10cm x 1cm x 2cm (L x W x H) Includes: Plastic seat fastener, mounting parts (3x M4 bolts, nut). Original spare part from Urban Drivestyle Berlin!

€14.95*