12V Converter / DC Converter 48V Higo

€24.95*

Product number: LIG-CON-48V-HIG

Product information "12V Converter / DC Converter 48V Higo"

DC converter / voltage transformer with HIGO / Julet connections

Input: 7 - 60 VDC
- Connector: 1x 2-pin HIGO / Julet female, red
Output: 12V / 1000 mA
- Connector: 2x 2-pin HIGO / Julet male, red
Total length incl. plug: ~ 30 cm
Converter size: 43 x 21 x 10 mm

General information:

HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.

A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.

Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

HIGO / Julet extension cable 100 cm for ebike, 2 PIN female to male, red HIG-LIG-100

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 100 cm / 39,37 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€9.95*

HIGO / Julet extension cable 50 cm for ebike, 2 PIN female to male, red HIG-LIG-050

Extension cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 50 cm / 19,68 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€8.95*

E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination G3150

E-Bike Rearlight Retro LED black matte and red lense with guard and licence plate illumination Good looking design and best quality The E-Bike rear light to mount on frametube or carrier with LED technology. Operates with Julet Mini connectors 2 pins to battery controller Equipped with powerful LEDs Alu casing black matte with red lens and guard Length: 90 mm (~3,54inches) Hight: 59 mm (~2,32 inches) Width: 65 mm without screws (~ 2,56 inches) Cable length ~ 500 mm (~ 16,68 inches)

€74.95*

UD Seat latch plastic clip SEA-LOC-PLA

Seat latch plastic clip This elongated plastic part holds the seat of your UNI MK closed. It is attached to a frame strut with one/two M4 bolts (depending on the year of manufacture of the bike) so that the seat can lock into place. It is compatible with all UNI MK versions from V1 onwards and all mounting parts are included. Material: Moulded plastic Colour: Black Dimensions: 10cm x 1cm x 2cm (L x W x H) Includes: Plastic seat fastener, mounting parts (3x M4 bolts, nut). Original spare part from Urban Drivestyle Berlin!

€12.95* €19.95* (35.09% saved)

Motor extension cable Julet 9 PIN, 42 cm / 16,5 inches HIG-MOT-EXT-042

Extension cable for ebike motors Technical data: Transmission of data and power between motor and cotroller Compatible with Bafang hub motors Waterproof Julet plug 9 PIN Cable length: ~ 33 cm ( 13 inches), 42 cm (16,5 inches) incl. plug General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€17.95*