Seat Post Clamp 35 mm Alu matt glossy
Product information "Seat Post Clamp 35 mm Alu matt glossy"
Seat Post Clamp 35 mm (~1,37 inches) Alu matt glossy
Product details:
- Colour: matt glossy
- Material: aluminium
- Inner diameter: 35 mm (~1,37 inches)
- Details: with Allen screws
- Mounting position: mounting on the seat tube
Original accessories from Urban Drivestyle Berlin!
Login
Cutsomers also bought
%
SHIMANO Right Shift Lever 7-speed
SL-M315-7R
€11.99*
€20.95*
(42.77% saved)
SHIMANO Right Shift Lever 7-speed
SL-M315-7R
SHIMANO - RAPIDFIRE PLUS - Right Shift Lever - Clamp Band - 7-speed
For reliable mountain bike shifting, SHIMANO's SL-M315 RAPIDFIRE shift lever is suited to quick shifting, giving riders the ability to downshift three gears in one stroke.
FEATURES
Light shifting operation, wider compatibility, and suitable for internal cable routing
Slim main lever body
RAPIDFIRE PLUS
Streamlined cockpit experience
Gear display positioned below the handlebar
Numbered gear display indicates gear position at a glance
OPTICAL GEAR DISPLAY
FEATURES
Light shifting operation, wider compatibility, and suitable for internal cable routing
Slim main lever body
RAPIDFIRE PLUS
Streamlined cockpit experience
Gear display positioned below the handlebar
Numbered gear display indicates gear position at a glance
OPTICAL GEAR DISPLAY
UD rear derailleur Shimano Tourney RD-FT35-A-SS 6/7-speed
RD-TY300-SGS
€11.99*
RD-FT35-A-SS
The Shimano Tourney FT35 7-speed rear derailleur has a short cage and is compatible with 6/7-speed systems.
Ideal for older bikes or models with entry-level transmission systems, the Shimano Tourney FT35 7-speed rear derailleur offers reliable shifting performance in difficult terrain and riding conditions.
FEATURES
Less maintenance by suitable feature
Double tension rear derailleur
Wheel-type cable guide pulley for strong against cable bending
Enough lower profile, Enough ground clearance to avoid rear derailleur to hit obstacles
Upgraded appearance (RD-FT55)
Interchangeable with SHIMANO MTB 7/6-speed system
Front single use only
Compatible with 11T top rear sprocket (total capacity 17T)
UD Classic Taillight LED 12V for E-Bikes
BAC-LED-BLA-HIG
€59.95*
UD Classic Taillight LED 12V for E-Bikes
This classic moped tail light, fits perfectly to the vintage design of your UNI MK!
The LED tail light in robust steel housing runs on 12V voltage and contributes to the safety and appearance of your UNI MK e-bike. Originally intended as a motorbike tail light and therefore very sturdily built, it also supports the brake light function of some control units when connected. The installation of the rear light is quickly done and all necessary mounting and assembly parts are included.
Note:
Higo 2-pin female connector for UNI MK, Swing, Bobber models(V5 & newer), UDX & UNI Boost models.
Not compatible with UDX mid-engine version which only has a 6V light output.
Features of the rear light
Material: steel
Power: 2W
Voltage: 12V
Colour: black
Vintage design accentuates UNI MK's moped look
Universal tail light for all e-bikes, mopeds & motorbikes with 12V voltage.
Includes: LED tail light, mounting parts
with European approval (E4)
Original accessories from Urban Dirvestyle Berlin!
Wiring harness 1T5, waterproof, 56 cm / 22,05 inches
CAB-TRE-1T5-056
€24.95*
Wiring harness 1T4
Technical data:
Transmission of power and data between e.g. the controller and the brake sensors, the thumb throttle and the display
Waterproof plugs / connectors
Cable length: ~ 56 cm / 22.05 inches, incl. connector ~ 66 cm / 26 inches
Connections:
3x female 3-PIN Jullet connector yellow
1x female 5-PIN Jullet connector green
1x male 2-PIN Jullet connector red
1x male 9-PIN Jullet connector black
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.
%
Trelock LS780 Airflow 100 LED front light for ebikes
TRE-780-AIR
€62.95*
€169.90*
(62.95% saved)
Trelock LS780 Airflow 100 LED front light for ebikes
The Trelock LS780 Airflow LED front light for your UNI bike!
StVO-compliant, slim design and powerful light output!
When it comes to front lights, TRELOCK focuses on higher performance with a slim, harmonious design: Thanks to double-lens technology, the Airflow 100 front light, with a compact 45mm housing, achieves a full 100 lux illuminance. Two windows in the housing increase lateral visibility, while a small, removable reflector ensures a slimmer silhouette. The AIRFLOW can be flexibly aligned with the ZL 990 double-axis bracket. The high-quality choice of materials in combination with the reduced design of the AIRFLOW is particularly suited to the demanding cyclist. The Airflow 100 is StVZO-certified.
Compatible with all UNI bikes with Higo 2-pin plug.
Features of the Trelock lamp
Manufacturer: Trelock
Material: Aluminium & plastic
Colour: black
Voltage: 6-12V
Light intensity: 100 Lux
Visibility: 120m / 6500m
Includes: Front lamp, cable with 2-pin female higo round plug red (not fitted), adaptable lamp holder + attachments.
StVO-compliant
Made in Germany
Original accessories from Urban Drivestyle Berlin!
Bafang compatible wiring harness 1T4, waterproof, 118 cm / 46,45 inches
CAB-TRE-1T4-MK-118
€24.95*
Wiring harness 1T4, Bafang compatible
Technical data:
Transmission of power and data between the controller and the brake sensors, thumb throttle and display.
Compatible with Bafang hub motors
Waterproof plugs / connectors
Cable length: ~ 118 cm / 46,45 inches, incl. connector ~ 126 cm / 49,90 inches
Connections:
1x male 3-PIN Julet connector yellow for throttle / thumb throttle.
1x male 5-PIN Jullet connector green for display
2x female 3-PIN Jullet connector yellow for shift / brake sensor
1x male 8-PIN Jullet connector black for controller
General information:
HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use.
A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged.
Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.