Cable protection conduit - copper shielding conduit tinned sold by the meter O 8.5 -25 mm - 10 cm

204 BAFANG Motor 500W Rear wheel 20 x 4 - 80 mm wide 20 inch rear wheelmatt black coated aluminium rim ~ 80 mm / 3,15 inches wide36 spokes 2,6 mm / 0,1 inchesdisc brake mount ~44 mm / 1,73 inches 6 holeHub installation dimension approx.: ~ 175 mm / 6,89 inchesaluminium hub with industrial bearings500W48VFixed axle: ~ 12 mm / 0,47 inches diameterMounting for cassetteRim width: ~ 80 mm / 3,15 inchesWith rim tapeWeight: ~ 4800 g / 10,58 lbs Specification Motor: Core Data Position Rear Motor Construction Gear drive Rated Voltage (DCV) 48 n0 (Rpm) 325 ; 245 Rated Power (W) 500 nT(Rpm) 290 ; 205 Max Torque 80 N.m Efficiency (%) ≥ 80 Color Black Weight (kg) 4.1 Noise Grade (dB) ＜55 Operating Temperature -20 - 45℃ Mounting Parameters Brake Disc Brake Installation Widths (mm / OLD) 175 Max. Housing Diameter (mm) 158.5 Cabling Route Through Shaft, Right Cable Length(mm), Connection Type 250 G9.1 / G9.5 Gearshift Cassette Spoke Specification 36H*12G Tests & Certifications IP IP X5 Certifications ROHS / CE Salt Spray Test Standard(h) 96

Cable protection hose with velcro 85 cm  (~ 33,46 inch)

Cable protection conduit - copper shielding conduit tinned sold by the meter O 3.5 -10 mm - 10 cm Copper shielding conduit made of braided, tinned copper wires is flexible and expandable. Copper shielding tubes for EMC shielding or protection against damage Sold by the meterPrice: Euro 0,50 per 10 cm - Please indicate the length in the multiple of 10 cm, e.g.: 1,50 m required length = 15 x 10 cm = order 15 pcs.Ends cutGoods cut to length for the customer are excluded from exchange! 0,60 € per 10 cm (~3,94 inches) how to order:100 cm (~39,37 inches) needed = 10 x 10 cm (~3,94 inches) = 10 x 0,60 €, when 150 cm needed (~59,05 inches) = 15 x 10 cm (~3,94 inches)  = 15 x 0,60 € 

Fat Bike Cartridge B.B. Set for 100mm lugs black for 100 mm bottom bracket lugs housing: 90 mm ( ~ 3,54 inches) total axle length (L1): 180 mm (~7,08 inches) length between L2: 44 mm  (~1,73 inch) ~ 395 gr. BSA, ISO sealed bearings compatible with Shimano tools

DC converter / voltage transformer with HIGO / Julet connections Input: 7 - 60 VDC Connector: 1x 2-pin HIGO / Julet female, red Output: 12V / 1000 mA Connector: 2x 2-pin HIGO / Julet male, red Total length incl. plug: ~ 30 cm Converter size: 43 x 21 x 10 mm General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

Mini Bell black diameter: ca. 35 mm