Hope adapter for disc brakes B PM to IS F203 / R183

€19.95*

% €22.00* (9.32% saved)
Product number: HBMB
Product information "Hope adapter for disc brakes B PM to IS F203 / R183"

 

Hope brake adapter B for PM on IS fork 203mm / rear triangle 183 mm silver.

 

Hope adapter for mounting postmount brakes on IS2000 fork or frame. Can be used for rear wheel with 183 mm brake disc or front wheel with 203 mm brake disc.

 

Please also note the data sheet below when choosing the right adapter!

 

  • Post Mount to IS
  • for 183 mm rear brake disc
  • for 203 mm front brake disc
  • incl. mounting bolts
  • silver

 

Hope Datenblatt / Datasheet

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Tire Beach Bum 26 x 2.125 whitewall CC262125BkWh
Tire Beach Bum 26 x 2.125 whitewall Very cool and beautiful tire from well-known and high quality production. Mounted here on our 26 mm (~1,03 inches) wide magnesium rim and on our 57 mm (~2,24 inches) black alu rim. Total diameter assembled depending on the pressure and rim width.Total diameter on a 26 mm ( ~ 1,03 inches) rim: ~ 670 mm ( ~ 26,38 inches)Total diameter on a 57 mm ( ~ 2,24 inches) rim: ~ 660 mm ( ~ 25,98 inches) 57 - 559 26 x 2.125 210 - 350 kPa 2.1 - 3.5.Bar 30 - 50 PSI 1 kg (~ 2,2 pounds) Do not inflate the tire more than 1.0 bar on wide rims. There is a risk that the flank wire will tear (applies to all tires on extra-wide rims).

€28.95*
Tire Super Brick 26 x 3.0 whitewall 6326
Tire Super Brick 26 x 3.0 whitewall  74-559 100 - 250 KPa 1.0 - 2.5.Bar 15-36 PSI 1,4 kg (~3,1 pounds)

€34.95*
Cruiser Moon Handlebar, black PHB-025sw
Cruiser Moon Handlebar, black Hi-Ten steel, black Width 695 mm (~27,36 inches) Raise: 100 mm (~3,94 inches) Depth: 300 mm (~11,81 inches) for 25.4 mm (~1 inch) stems old style cruising will never die!

€34.95*
Glitter Grips Gold Rubber Y869
Rubber Glitter Grips Like they were in the 60s/70s! The coolest grips You can put on Your Krate, Stingray or other oldschool stuff. 1 Pair    

€6.95*
%
Stickshifter for Shimano 3 speed 34601SH
Stickshifter for Shimano 3 speed Solid stickshifter made of partial polished steel with black nicely moulded plastic knob complete length: 14,5 cm width of mount: 6,3 cm speeds snap into place mounts with two wholes for frame assembling This gear lever was previously imported and distributed by The Chopperdome of 1055 LZ Amsterdam, Admiraal de Ruijterweg 346.

€39.95* €49.95* (20.02% saved)
Highriser Handlebar Y654
Highriser Handlebar for the Polo Bike or similar cult bikes of the 60s and 70s chrome-plated (ASTM9) steel Gripwidth: 640 mm (~25,2 inches) Griphight: 325 mm (~12,79 inches) Griplength: 120 mm (~4,72 inches) for 25,4 mm (~1 inch) stems

€24.95*