UD handlebar cover handlebar protection cover


Product number: HAN-BAG-FAH
Product information "UD handlebar cover handlebar protection cover"

Urban Drivestyle handlebar cover / handlebar protection cover for bikes.

Protection for the electronics and mechanics at the cockpit of your bike!

Whether your bike is outdoors for a long time or is transported, with the handlebar cover you protect the electronics and the mechanics at the cockpit of your bike from the weather.

The cover is easily and quickly slipped over the handlebars and attached with the help of Velcro.

In case of moisture inside the cover, open it and let it dry as well as the handlebar.


The handlebar protection cover is suitable for use on a handlebar with a width of 60 - 80 cm. At the ends the cover is about 14 cm wide, in the middle about 19 cm wide.


  • Protection for the handlebar fittings and electronics of the bike cockpit during transport.
  • Waterproof material
  • Quick and easy installation with velcro tape


  • Material: nylon with PU coating
  • Color: black
  • Closure: Industrial Velcro
  • Dimensions:~ 85 x 14 cm (LxW)
  • Weight: ~ 45 g
  • With logo of Urban Drivestyle!

Original accessories from Urban Drivestyle Berlin!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Cutsomers also bought

CONTEC Spacer Box Spacer Ring Set Alu for 1 1/8", 24 pieces UD13345
Spacer Box / Spacer Ring Set Alu for 1 1/8" , 24 pieces Spacers for A-Head forks 24 spacers 4 x 2 mm 6 x 5 mm 6 x 10 mm 4 x 15 mm 4 x 20 mm Inner diameter: ~ 28.8 mm /1 1/8" Outer diameter: ~ 35.8 mm Colour: black Material: aluminium Original accessories from Urban Drivestyle Berlin!

Rimstrip 26 inch. 30 mm Y749
Rimstrip 26 inch Width: 30 mm (~1,18 inches) 47-559, 50-559, 57-559 26 x 1.75, 26 x 1.90, 26 x 2.125

HIGO / Julet adapter cable 11 cm for ebike, 2 PIN male to male, red HIG-ADA-MAL_011
Adapter cable for Ebike Technical data: Connector: 2-pin HIGO / Julet (2x male) Water resistance: IP65 Cable length: 11 cm / 4,3 inches Plug connection: red Outer material: ABS plastic General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

H7 LED headlight bulb 12V for e-bikes and motorbikes LED-BUL-12V
H7 LED headlight bulb 12V for e-bikes and motorbikes You don't want to ride your bike in the dark? Then turn night into day! UNI Bike's standard headlight H7 socket allows you to use car or motorbike headlight bulbs like this H7 LED bulb - turn night into day and go for a ride! Super easy to install, just plug and play - no modifications or rewiring required! Low power consumption due to LED does not affect your battery capacity and guarantees full power for your engine! Properties of the H7 LED Standard H7 base Power: 7W Voltage: 12V Light colour: 6000K Individual under E-bikes Super white light Extra long life Low power consumption  Original accessories from Urban Drivestyle Berlin!

Thumb gas / Thumb throttle V2 G31110
For mounting on the handlebar. We recommend left side below. The throttle can be installed on the Greaser or the Outsider.It is connected to the controller (control unit) via the existing cables. The drive assistance from the engine can be controlled manually by the thumb throttle. Fitts Greaser and Outsider!

UD black crankset Pro Wheel 170mm, square, 52 teeth PM-1001402
UD black crankset Pro Wheel 170mm, square, 52 teeth black steel chainring with 52 teethblack aluminum crankspedal arm length 170 mm for pedals with 9/16 threadblack plastic chain guard, both sidesThe crankset is suitable for a square axle!With 2 pieces of axle - end bolts