1-Double crown fork 570 mm chrome plated 1 inch shaft

€94.95*

Product number: RFK-TPT570CP
Product information "1-Double crown fork 570 mm chrome plated 1 inch shaft"

Double crown fork 570 mm chrome plated 1 inch shaft
chrome-plated,
1 inch shaft
shaft length: 250 mm

Hiten steel with forged aluminum bridge, disc brake mount
Length of fork tubes: 570 mm,
Width between fork tubes: ~ 93 mm.
Diameter of the standpipes: ~ 32mm
Inner diameter of the standpipes: ~ 29 mm
Axle mount: 100 mm
The shaft length can be changed during installation, via the mounting height of the bridges.
The shaft has a M6 hole at the bottom
Weight: ~ 2 kg

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Tire Fat Bike Classic Cycle Zig Zag 26 x 4.0 97/102-559 whitewall ZZ264BKWH
Fat Bike Tire Classic Cycle Zig Zag 26 x 4.0 whitewall 97/102-559 72 TPI = Lightweight and strong! max load = 155kg/pc About 87 mm (~4,25 inches) wide on a 80 mm (~3,15 inches) rim. About 107 mm (~4,21 inches) wide on a 100 mm (~3,94 inches) rim. This tire fits on all 26" Classic Cycle rims from 60 to 120 mm (~2,36 to 4,72 inches) width! But please check frame/fork for clearance! The pictures shows the new Zig Zag Tire assembled on a 132 mm (~5,2 inches) wide rim. Diameter complete: 730 mm + / - 20 mm (~28,74 +/- 0,79 inches) concerning to pressure and rim diameter. Weight: 1890 g (~4,17 pounds) If you assemble the tire on extra wide rims not to put more pressure than 16 PSI. It could blast. 1 piece Tube recommendation: For rim widths up to 102 mm (~4 inches): 26 x 4.0 tube. For wider rims: till 26 x 5.0 tube Notice: The white sidewall has a very slight bluish tinge.The bluish part is to prevent yellowing.

€79.95*
2-Double crown fork 570 mm black 1 inch shaft RFK-TPT570BK
Double crown fork 570 mm black 1 inch shaftblack anodized, 1 inch shaftshaft length: 250 mm Hiten steel with forged aluminum bridge, disc brake mountLength of fork tubes: 570 mm, Width between fork tubes: ~ 93 mm.Diameter of the standpipes: ~ 32mmInner diameter of the standpipes: ~ 29 mmAxle mount: 100 mmThe shaft length can be changed during installation, via the mounting height of the bridges.The shaft has a M6 hole at the bottomWeight: ~ 2.0 kg

€94.95*
Kenda Kraze 26 x 3.0 Oldschool Tire 523790
Tire Kenda Kraze 26 x 3.0 68-559 THE ultra fat custom tire with oldschool tread The ultimate custom cruiser tire for maximum performance! On 80 mm (~3,15 inches) silver rim as shown it is 82 mm (~3,23 inches) wide and 66 mm (~2,60 inches) high (above the rim). On 39 mm (~1,53 inches) rim about 67 mm (~2,64 inches) wide and 62 mm (~2,44 inches) high (above the rim) This tire fits rims of widths 30 mm (~1,18 inces) to 82 mm (~3,23 inches) width! If you assemble the tire on wide rims not to put more pressure than 16 PSI. It could blast. But please check frame/fork for clearance! Weight: 1260 g (~2,78 pounds) 30 TPI

€41.95*
Street Hog III Tire 20 x 4 1/4 inch 9020
Street Hog III Extra Wide Tire 20 x 4 1/4 Diameter: 406 For custom and chopper bikes like the Schwinn New Stingray. This tire fits on all 20" Classic Cycle rims wider than 50 mm (~1,97 inches) ! But please check frame/fork for clearance! On a 80 mm (~3,15 inches) rim the tire is about 93 mm (~3,66 inches) wide and it will 70 mm (~2,75 inches) protrude over the rim. Depending on the rim width and the air pressure, the tire has a total diameter of approx. 60 cm. 30TPI Weight: ~ 1,67 kg (~3,68 pounds) External Diameter of Street Hog III 20 x 4 1/4 on 82 mm (~3,23 inches) rim is ~560 mm (~22,05 inches) - May vary because of pressure. If you assemble the tire on wide rims not to put more pressure than 30 PSI. It could blast.

€52.95*
%
Hope adapter for disc brakes N PM to IS 180R HBMNS
Hope brake adapter N for PM to IS rear wheel 180 mm silver. Hope adapter for mounting postmount brakes on IS2000 frames. Can be used for rear wheels with 180 mm brake disc. Please also note the data sheet below when choosing the right adapter! Post Mount to IS for 180 mm rear brake disc incl. mounting bolts silver

€19.95* €22.00* (9.32% saved)
Fender Set 26 123 mm Black with Stays extra wide 067-123
Fender Set 26 inch.  Fender Stays 123 mm width 123 mm (~4,84 inches) wide, 26 inch., matte black and extra long in the rear complete fender set for cruisers or similar bike types Width: 123 mm (~4,84 inches) Hight: 30 mm (~1,18 inches) Diameter inside: ~ 770 mm (~30,3 inches) Diameter outside: ~ 810 mm (~31,89 inches) Rear lenght in circumference: ~125 cm (~49,2 inches) Front length in circumference: ~ 80 cm (~31,5 inches) Steel powder coated flat black Weight: ~ 2,6 kg (~5,73 pounds) On chainside of the rear fender you will find a benting to give way to the chain.

€74.95*