Springer Fork 26 inch. for Cantilevers/V-Brakes, black 1 1/8 Steerer

€84.95*

Product number: 118264c-sw
Product information "Springer Fork 26 inch. for Cantilevers/V-Brakes, black 1 1/8 Steerer"

Springer Fork 26 inch. for Cantilevers/V-Brakes, black  1 1/8 steerer

26 inch., can be used also on cruisers, adjustable, black

  • 1 1/8 inch steerer, steerer lengh: 190 mm (~7,48 inches), 100 mm (~3,94 inches) thread
  • thread length: 100 mm (~3,94 inches)
  • Width between drop outs: 100 mm (~3,94 inches)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Cutsomers also bought

Headset, 1 1/8 inch, black 390508
Headset 1 1/8" black to be used with threaded front forks, black Size: A: 25,4 mm (~1 inch) B: 34,0 mm (~1,34 inches) C: 30,0 mm (~1,18 inches)

€7.98*
Tip
Streetking Whitewall Balloon Tire 26 x 2.125 57 x 559 Y250
Streetking Whitewall Balloon Tire 26 x 2.125 57 - 559 nostalgia whitewall tire for the ultimate old school look! width of inflated tire: 55 mm (~2,16 inches) This tire fits on all 26" Classic Cycle rims up to 75 mm (~2,95 inches) width! But please check frame/fork for clearance! If you assemble the tire on wide rims not to put more pressure than 16 PS. It could blast.

€29.95*
Spacer 5 mm 1 1/8 alu black 390468
Spacer 5 mm (~0,20 inches) 1 1/8 alu black anodized black aluminium for 1 1/8 inch. a-head shafts / head sets

€1.19*
%
Stickshifter for Shimano 3 speed 34601SH
Stickshifter for Shimano 3 speed Solid stickshifter made of partial polished steel with black nicely moulded plastic knob complete length: 14,5 cm width of mount: 6,3 cm speeds snap into place mounts with two wholes for frame assembling This gear lever was previously imported and distributed by The Chopperdome of 1055 LZ Amsterdam, Admiraal de Ruijterweg 346.

€39.95* €49.95* (20.02% saved)
Handlebar Reducer / Spacer 22,2 - 25,4 mm black Y964
Handlebar Reducer / Spacer 22,2 - 25,4 mm (~0,87 - 1 inch) Reduces from 25,4 mm (~ 1 inch) to 22,2 mm (~0,87 inch) 2 pieces, aluminum, black, corrugated Picture 2 shows article number 965 (same article in silver). Length: 44 mm (~1,73 inches)

€4.99*
Vintage Boardtracker Reverse Brake Lever polished 17 mm 4825
Vintage Boardtracker Reverse Brake Lever Alu 17 mm Fits to all our handlebarsThese levers are high-quality, easy to assemble and have a smooth handling. The cable passes through or outside of the handlebar, whatever your preference is. Polished aluminum Mounting side: left or right Assembly by Allen / hexagon socket 17 mm inner link clamp. Please check the inside diameter of the handlebar. Weight: 90 g 1 piece 

€24.95*