UDX BMX Saddle City Universal, black

€16.95*

% €17.95* (5.57% saved)

Product number: UDX-BMX-SAD

Product information "UDX BMX Saddle City Universal, black"

UDX BMX Saddle City Universal, black / Comfort Saddle

Colour: black, imitation leather
Weight: 610 g / 1,34 lbs
Material: ultra-light PU foam
Saddle base: polypropylene
Base: steel with steel springs
Length: ~ 260 mm / 10,24 inches
Width: ~ 210 mm / 8,60 inches
Mounting position: Mounting on the patent seat post or on a saddle rail with the help of a saddle clamp.

Note: The saddle clamp is not included in the delivery and can be purchased separately under the number 250790 in our shop.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Cutsomers also bought

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws UDX-BMX-STE

UDX BMX Stem A-Head 1 1/8 Inch, black, 4 screws aluminium body detachable handlebar clamp handlebar acceptance 22,2 mm (~,87 inches) Nosing: 50 mm (~1,97 inches) for 1 1/8 inch. a-head shafts / headsets Original UDX BMX part from Urban Drivestyle Berlin

€19.95*

UDX Hunter Rack luggage rack PM-1001247

The Hunter Rack luggage rack as a utility upgrade for your UDX! This robust and high-quality carrier is designed for up to 50 kg load and can even be equipped with a second seat cushion for occasional passenger rides around the block! Note: A frame adapter is available separately for the suspended Panza version. Features of the Hunter Rack Material: Chromoly steel Colour: Black Dimensions: L 49cm x W 17cm x H 41cm (platform 41cm x 17cm) Weight: approx. 2 kg Includes: 1x Hunter Rack luggage carrier, mounting material: 4 x M10x16 screw, 4 x washers Version: X-Berg / XoppaPanzaX-Berg / Xoppa Original accessories from Urban Dirvestyle Berlin

€59.95* €139.95* (57.16% saved)

Bafang 1T4 wiring harness 70 cm / 27,55 inches with 2 PIN extension in cable protection hose CAB-PRO-VEL-085

Pre-assembled Bafang wiring harness 1T4 with 2PIN extension cable in cable protection hose. Technical data of Bafang wiring harness 1T4: Transmission of power and data between the controller and the brake sensors, thumb throttle and display. Compatible with Bafang hub motors Waterproof plugs / connectors Cable length: ~ 70 cm / 27,55 inches, incl. connector ~ 80 cm / 31,5 inches Connections: 1x male 3-PIN Julet connector yellow for throttle / thumb throttle. 1x male 5-PIN Jullet connector green for display 2x female 3-PIN Jullet connector yellow for shift / brake sensor 1x male 8-PIN Jullet connector black for controller Technical data of Extension cable for Ebike: Connector: 2-pin HIGO / Julet (1x male - 1x female) Water resistance: IP65 Cable length: 100 cm / 39,37 inches Plug connection: red Outer material: ABS plastic Technical data cable protection hose: Keeps cables tidy and protected! Diameter: ~ 20 mm Length: ~ 850 mm Fabric hose with practical Velcro fastener over the entire length General information: HIGO / Julet plugs are common on many e-bikes because they provide a firm and waterproof connection. There are different types, which differ in the number of pins and thus the area of use. A HIGO / Julet connector is generally quite firm because it is waterproof. It can be disconnected by pulling, NOT twisting. If twisted, the pins could be damaged. Please note the arrows on the outside - they help to align and fit the connectors. When the connections are properly plugged together, no coloured plastic should be visible.

€32.95*

UD black crankset LASCO 155 mm, square, 52 teeth UD1966

UD black crankset LASCO 155 mm, square, 52 teeth black steel chainring with 52 teethblack aluminum crankspedal arm length 155 mm for pedals with 9/16 threadblack aluminium chain guardThe crankset is suitable for a square axle!With 2 pieces of axle - end bolts

€39.95*

UD special headset Ahead 1 1/8 inch black UD100

UD special headset Ahead 1 1/8 inch black durable and high quality 1 1/8" headset Ahead for 1 1/8 inch shaft diameter color: black sealed roller bearings Outer diameter bearing shell: 44 mm Original headset for the UDX from Urban Drivestyle in Berlin Not suitable for forks with threaded shaft!

€34.95*

UD controller integrated in battery rail 48V 22A UD1546

UD controller integrated in battery rail 48V 22A DC Motor Controller KT48ZWSRM - XFC1F1 22A Voltage: 48V off Voltage: 40 +/- 1V Electric current: 22A +/- 1 A Battery base with 5 pins for battery connection 500 Watt Original part from Urban Drivestyle Berlin

€159.95*